# Emcraft SOM-NRF9151 on its BSB baseboard, driven from a brintOS machine over
# a SEGGER J-Link on P4 (SWD) granted through WebUSB.
#
# The adapter goes through the station's seam, mfg-jtag.cfg, like every other
# per-SOM config in this image. Its default there is the F7 bench's Olimex, so
# this config names the J-Link first; `som-program-nrf91 --adapter <name>`, or
# BRINTOS_JTAG_IFACE set before this file is sourced, overrides it.
if {![info exists BRINTOS_JTAG_IFACE]} {
    set BRINTOS_JTAG_IFACE interface/jlink.cfg
}
source [find mfg-jtag.cfg]

# The nRF91 is SWD-only, and the J-Link offers JTAG first.
transport select swd

source [find target/nordic/nrf91.cfg]

# nrf91.cfg sets 1000 kHz and warns that flash programming fails above 2000.
# 1000 is also what this board needed natively (nrfutil, 2026-09-28). There is
# no reset handler that changes it, so this one line governs the whole run.
if {![info exists BRINTOS_JTAG_SPEED]} {
    set BRINTOS_JTAG_SPEED 1000
} elseif {$BRINTOS_JTAG_SPEED > 2000} {
    echo "Warn : BRINTOS_JTAG_SPEED $BRINTOS_JTAG_SPEED kHz capped at 2000"
    set BRINTOS_JTAG_SPEED 2000
}
adapter speed $BRINTOS_JTAG_SPEED