==CASE version== Debian resolvconf Git snapshot rc=0 ==END version== ==CASE help== Usage: resolvconf COMMAND Manage nameserver information. Commands: -a IFACE Add DNS configuration for IFACE from stdin. -d IFACE Delete DNS configuration for IFACE. -u Run update actions (e.g. regenerate resolv.conf). -i List interfaces providing DNS configuration. --list, -l Show DNS configuration for each interface. --enable-updates Enable updates; run update actions if any are pending. --disable-updates Disable updates until re-enabled. --updates-are-enabled Return 0 if updates are enabled, 1 otherwise. --version Print the resolvconf version. --help, -h Print this help text. The IFACE argument may not contain spaces, slashes, an initial dot, an initial hyphen or an initial tilde. IFACE is conventionally formed from the interface name, a dot, and the name of the interface configuration program (e.g. dhclient) or the address family name (e.g. inet or inet6): eth0.dhclient, wlan0.inet6 etc. rc=0 ==END help== ==CASE help-short== Usage: resolvconf COMMAND Manage nameserver information. Commands: -a IFACE Add DNS configuration for IFACE from stdin. -d IFACE Delete DNS configuration for IFACE. -u Run update actions (e.g. regenerate resolv.conf). -i List interfaces providing DNS configuration. --list, -l Show DNS configuration for each interface. --enable-updates Enable updates; run update actions if any are pending. --disable-updates Disable updates until re-enabled. --updates-are-enabled Return 0 if updates are enabled, 1 otherwise. --version Print the resolvconf version. --help, -h Print this help text. The IFACE argument may not contain spaces, slashes, an initial dot, an initial hyphen or an initial tilde. IFACE is conventionally formed from the interface name, a dot, and the name of the interface configuration program (e.g. dhclient) or the address family name (e.g. inet or inet6): eth0.dhclient, wlan0.inet6 etc. rc=0 ==END help-short== ==CASE no-args== resolvconf: Error: Command not recognized Usage: resolvconf COMMAND Manage nameserver information. Commands: -a IFACE Add DNS configuration for IFACE from stdin. -d IFACE Delete DNS configuration for IFACE. -u Run update actions (e.g. regenerate resolv.conf). -i List interfaces providing DNS configuration. --list, -l Show DNS configuration for each interface. --enable-updates Enable updates; run update actions if any are pending. --disable-updates Disable updates until re-enabled. --updates-are-enabled Return 0 if updates are enabled, 1 otherwise. --version Print the resolvconf version. --help, -h Print this help text. The IFACE argument may not contain spaces, slashes, an initial dot, an initial hyphen or an initial tilde. IFACE is conventionally formed from the interface name, a dot, and the name of the interface configuration program (e.g. dhclient) or the address family name (e.g. inet or inet6): eth0.dhclient, wlan0.inet6 etc. rc=99 ==END no-args== ==CASE unknown-cmd== resolvconf: Error: Command not recognized Usage: resolvconf COMMAND Manage nameserver information. Commands: -a IFACE Add DNS configuration for IFACE from stdin. -d IFACE Delete DNS configuration for IFACE. -u Run update actions (e.g. regenerate resolv.conf). -i List interfaces providing DNS configuration. --list, -l Show DNS configuration for each interface. --enable-updates Enable updates; run update actions if any are pending. --disable-updates Disable updates until re-enabled. --updates-are-enabled Return 0 if updates are enabled, 1 otherwise. --version Print the resolvconf version. --help, -h Print this help text. The IFACE argument may not contain spaces, slashes, an initial dot, an initial hyphen or an initial tilde. IFACE is conventionally formed from the interface name, a dot, and the name of the interface configuration program (e.g. dhclient) or the address family name (e.g. inet or inet6): eth0.dhclient, wlan0.inet6 etc. rc=99 ==END unknown-cmd== ==CASE add-no-iface== resolvconf: Error: No interface name specified Usage: resolvconf COMMAND Manage nameserver information. Commands: -a IFACE Add DNS configuration for IFACE from stdin. -d IFACE Delete DNS configuration for IFACE. -u Run update actions (e.g. regenerate resolv.conf). -i List interfaces providing DNS configuration. --list, -l Show DNS configuration for each interface. --enable-updates Enable updates; run update actions if any are pending. --disable-updates Disable updates until re-enabled. --updates-are-enabled Return 0 if updates are enabled, 1 otherwise. --version Print the resolvconf version. --help, -h Print this help text. The IFACE argument may not contain spaces, slashes, an initial dot, an initial hyphen or an initial tilde. IFACE is conventionally formed from the interface name, a dot, and the name of the interface configuration program (e.g. dhclient) or the address family name (e.g. inet or inet6): eth0.dhclient, wlan0.inet6 etc. rc=1 ==END add-no-iface== ==CASE del-no-iface== resolvconf: Error: No interface name specified Usage: resolvconf COMMAND Manage nameserver information. Commands: -a IFACE Add DNS configuration for IFACE from stdin. -d IFACE Delete DNS configuration for IFACE. -u Run update actions (e.g. regenerate resolv.conf). -i List interfaces providing DNS configuration. --list, -l Show DNS configuration for each interface. --enable-updates Enable updates; run update actions if any are pending. --disable-updates Disable updates until re-enabled. --updates-are-enabled Return 0 if updates are enabled, 1 otherwise. --version Print the resolvconf version. --help, -h Print this help text. The IFACE argument may not contain spaces, slashes, an initial dot, an initial hyphen or an initial tilde. IFACE is conventionally formed from the interface name, a dot, and the name of the interface configuration program (e.g. dhclient) or the address family name (e.g. inet or inet6): eth0.dhclient, wlan0.inet6 etc. rc=1 ==END del-no-iface== ==CASE iface-slash== resolvconf: Error: Slash not allowed in interface record name rc=1 ==END iface-slash== ==CASE iface-space== resolvconf: Error: Space not allowed in interface record name rc=1 ==END iface-space== ==CASE iface-dot== resolvconf: Error: Initial dot not allowed in interface record name rc=1 ==END iface-dot== ==CASE iface-hyphen== resolvconf: Error: Initial hyphen not allowed in interface record name rc=1 ==END iface-hyphen== ==CASE iface-tilde== resolvconf: Error: Initial tilde not allowed in interface record name rc=1 ==END iface-tilde== ==CASE u-takes-no-arg== resolvconf: Error: The -u option does not take an argument Usage: resolvconf COMMAND Manage nameserver information. Commands: -a IFACE Add DNS configuration for IFACE from stdin. -d IFACE Delete DNS configuration for IFACE. -u Run update actions (e.g. regenerate resolv.conf). -i List interfaces providing DNS configuration. --list, -l Show DNS configuration for each interface. --enable-updates Enable updates; run update actions if any are pending. --disable-updates Disable updates until re-enabled. --updates-are-enabled Return 0 if updates are enabled, 1 otherwise. --version Print the resolvconf version. --help, -h Print this help text. The IFACE argument may not contain spaces, slashes, an initial dot, an initial hyphen or an initial tilde. IFACE is conventionally formed from the interface name, a dot, and the name of the interface configuration program (e.g. dhclient) or the address family name (e.g. inet or inet6): eth0.dhclient, wlan0.inet6 etc. rc=1 ==END u-takes-no-arg== ==CASE enable-takes-no-arg== resolvconf: Error: The --enable-updates option does not take an argument Usage: resolvconf COMMAND Manage nameserver information. Commands: -a IFACE Add DNS configuration for IFACE from stdin. -d IFACE Delete DNS configuration for IFACE. -u Run update actions (e.g. regenerate resolv.conf). -i List interfaces providing DNS configuration. --list, -l Show DNS configuration for each interface. --enable-updates Enable updates; run update actions if any are pending. --disable-updates Disable updates until re-enabled. --updates-are-enabled Return 0 if updates are enabled, 1 otherwise. --version Print the resolvconf version. --help, -h Print this help text. The IFACE argument may not contain spaces, slashes, an initial dot, an initial hyphen or an initial tilde. IFACE is conventionally formed from the interface name, a dot, and the name of the interface configuration program (e.g. dhclient) or the address family name (e.g. inet or inet6): eth0.dhclient, wlan0.inet6 etc. rc=1 ==END enable-takes-no-arg== ==CASE version-with-copyright== Debian resolvconf Git snapshot Copyright: 1999-2018 Some One 2019 Someone Else License: GPL-2.0+ rc=0 ==END version-with-copyright== ==CASE upd-off-initial== rc=1 ==END upd-off-initial== ==CASE upd-enable== rc=0 ==END upd-enable== ==CASE upd-on== rc=0 ==END upd-on== ==CASE upd-flagfile== [eof] ==END upd-flagfile== ==CASE upd-disable== rc=0 ==END upd-disable== ==CASE upd-off-again== rc=1 ==END upd-off-again== ==CASE upd-flagfile-gone== absent ==END upd-flagfile-gone== ==CASE add-eth0== @ROOT@/etc/resolvconf/update.d/libc: Warning: @ROOT@/etc/resolv.conf is not a symbolic link to @ROOT@/run/resolvconf/resolv.conf rc=0 ==END add-eth0== ==CASE resolv-after-eth0== nameserver 10.0.0.1 nameserver 10.0.0.2 search example.com [eof] ==END resolv-after-eth0== ==CASE list-after-eth0== # resolv.conf from eth0.inet nameserver 10.0.0.1 nameserver 10.0.0.2 search example.com rc=0 ==END list-after-eth0== ==CASE ifaces-after-eth0== eth0.inet rc=0 ==END ifaces-after-eth0== ==CASE record-eth0== nameserver 10.0.0.1 nameserver 10.0.0.2 search example.com [eof] ==END record-eth0== ==CASE add-eth0-again== rc=0 ==END add-eth0-again== ==CASE resolv-after-readd== nameserver 10.0.0.1 nameserver 10.0.0.2 search example.com [eof] ==END resolv-after-readd== ==CASE update-explicit== @ROOT@/etc/resolvconf/update.d/libc: Warning: @ROOT@/etc/resolv.conf is not a symbolic link to @ROOT@/run/resolvconf/resolv.conf rc=0 ==END update-explicit== ==CASE resolv-after-u== nameserver 10.0.0.1 nameserver 10.0.0.2 search example.com [eof] ==END resolv-after-u== ==CASE prio-eth0== @ROOT@/etc/resolvconf/update.d/libc: Warning: @ROOT@/etc/resolv.conf is not a symbolic link to @ROOT@/run/resolvconf/resolv.conf rc=0 ==END prio-eth0== ==CASE prio-wlan== @ROOT@/etc/resolvconf/update.d/libc: Warning: @ROOT@/etc/resolv.conf is not a symbolic link to @ROOT@/run/resolvconf/resolv.conf rc=0 ==END prio-wlan== ==CASE prio-lo== @ROOT@/etc/resolvconf/update.d/libc: Warning: @ROOT@/etc/resolv.conf is not a symbolic link to @ROOT@/run/resolvconf/resolv.conf rc=0 ==END prio-lo== ==CASE resolv-priority== nameserver 10.0.0.53 nameserver 10.0.0.1 nameserver 10.0.0.9 [eof] ==END resolv-priority== ==CASE list-priority== # resolv.conf from lo.inet nameserver 10.0.0.53 # resolv.conf from eth0.inet nameserver 10.0.0.1 # resolv.conf from wlan0.inet nameserver 10.0.0.9 rc=0 ==END list-priority== ==CASE ifaces-priority== lo.inet eth0.inet wlan0.inet rc=0 ==END ifaces-priority== ==CASE prio-rev-lo== @ROOT@/etc/resolvconf/update.d/libc: Warning: @ROOT@/etc/resolv.conf is not a symbolic link to @ROOT@/run/resolvconf/resolv.conf rc=0 ==END prio-rev-lo== ==CASE prio-rev-wlan== @ROOT@/etc/resolvconf/update.d/libc: Warning: @ROOT@/etc/resolv.conf is not a symbolic link to @ROOT@/run/resolvconf/resolv.conf rc=0 ==END prio-rev-wlan== ==CASE prio-rev-eth0== @ROOT@/etc/resolvconf/update.d/libc: Warning: @ROOT@/etc/resolv.conf is not a symbolic link to @ROOT@/run/resolvconf/resolv.conf rc=0 ==END prio-rev-eth0== ==CASE resolv-priority-reversed== nameserver 10.0.0.53 nameserver 10.0.0.1 nameserver 10.0.0.9 [eof] ==END resolv-priority-reversed== ==CASE trunc-a== @ROOT@/etc/resolvconf/update.d/libc: Warning: @ROOT@/etc/resolv.conf is not a symbolic link to @ROOT@/run/resolvconf/resolv.conf rc=0 ==END trunc-a== ==CASE trunc-b== @ROOT@/etc/resolvconf/update.d/libc: Warning: @ROOT@/etc/resolv.conf is not a symbolic link to @ROOT@/run/resolvconf/resolv.conf rc=0 ==END trunc-b== ==CASE trunc-c== @ROOT@/etc/resolvconf/update.d/libc: Warning: @ROOT@/etc/resolv.conf is not a symbolic link to @ROOT@/run/resolvconf/resolv.conf rc=0 ==END trunc-c== ==CASE resolv-truncated-at-three== nameserver 10.0.0.1 nameserver 10.0.0.2 nameserver 10.0.0.3 [eof] ==END resolv-truncated-at-three== ==CASE loop-lo== @ROOT@/etc/resolvconf/update.d/libc: Warning: @ROOT@/etc/resolv.conf is not a symbolic link to @ROOT@/run/resolvconf/resolv.conf rc=0 ==END loop-lo== ==CASE loop-eth0== @ROOT@/etc/resolvconf/update.d/libc: Warning: @ROOT@/etc/resolv.conf is not a symbolic link to @ROOT@/run/resolvconf/resolv.conf rc=0 ==END loop-eth0== ==CASE resolv-truncated-at-loopback== nameserver 127.0.0.53 [eof] ==END resolv-truncated-at-loopback== ==CASE loop6-lo== @ROOT@/etc/resolvconf/update.d/libc: Warning: @ROOT@/etc/resolv.conf is not a symbolic link to @ROOT@/run/resolvconf/resolv.conf rc=0 ==END loop6-lo== ==CASE loop6-eth0== @ROOT@/etc/resolvconf/update.d/libc: Warning: @ROOT@/etc/resolv.conf is not a symbolic link to @ROOT@/run/resolvconf/resolv.conf rc=0 ==END loop6-eth0== ==CASE resolv-truncated-at-loopback6== nameserver ::1 [eof] ==END resolv-truncated-at-loopback6== ==CASE loop-off-lo== @ROOT@/etc/resolvconf/update.d/libc: Warning: @ROOT@/etc/resolv.conf is not a symbolic link to @ROOT@/run/resolvconf/resolv.conf rc=0 ==END loop-off-lo== ==CASE loop-off-eth0== @ROOT@/etc/resolvconf/update.d/libc: Warning: @ROOT@/etc/resolv.conf is not a symbolic link to @ROOT@/run/resolvconf/resolv.conf rc=0 ==END loop-off-eth0== ==CASE resolv-loopback-override== nameserver 127.0.0.53 nameserver 8.8.8.8 [eof] ==END resolv-loopback-override== ==CASE loop-old-lo== @ROOT@/etc/resolvconf/update.d/libc: Warning: @ROOT@/etc/resolv.conf is not a symbolic link to @ROOT@/run/resolvconf/resolv.conf rc=0 ==END loop-old-lo== ==CASE loop-old-eth0== @ROOT@/etc/resolvconf/update.d/libc: Warning: @ROOT@/etc/resolv.conf is not a symbolic link to @ROOT@/run/resolvconf/resolv.conf rc=0 ==END loop-old-eth0== ==CASE resolv-loopback-legacy-override== nameserver 127.0.0.53 nameserver 8.8.8.8 [eof] ==END resolv-loopback-legacy-override== ==TRANSCRIPT-END==