Primary enclosure logical identifier (hex): d5b401503fc0ec16 ArrayDevicesInSubEnclsr0 [0,-1] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Unsupported OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 SLOT 01 [0,0] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 Additional Element Status: Transport protocol: SAS number of phys: 1, not all phys: 0, device slot number: 0 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 SLOT 02 [0,1] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 Additional Element Status: Transport protocol: SAS number of phys: 1, not all phys: 0, device slot number: 1 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 SLOT 03 [0,2] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 Additional Element Status: Transport protocol: SAS number of phys: 1, not all phys: 0, device slot number: 2 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 SLOT 04 [0,3] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 Additional Element Status: Transport protocol: SAS number of phys: 1, not all phys: 0, device slot number: 3 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 SLOT 05 [0,4] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 Additional Element Status: Transport protocol: SAS number of phys: 1, not all phys: 0, device slot number: 4 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 SLOT 06 [0,5] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 Additional Element Status: Transport protocol: SAS number of phys: 1, not all phys: 0, device slot number: 5 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 SLOT 07 [0,6] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 Additional Element Status: Transport protocol: SAS number of phys: 1, not all phys: 0, device slot number: 6 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 SLOT 08 [0,7] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 Additional Element Status: Transport protocol: SAS number of phys: 1, not all phys: 0, device slot number: 7 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 SLOT 09 [0,8] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 Additional Element Status: Transport protocol: SAS number of phys: 1, not all phys: 0, device slot number: 8 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 SLOT 10 [0,9] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 Additional Element Status: Transport protocol: SAS number of phys: 1, not all phys: 0, device slot number: 9 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 SLOT 11 [0,10] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 Additional Element Status: Transport protocol: SAS number of phys: 1, not all phys: 0, device slot number: 10 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 SLOT 12 [0,11] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 Additional Element Status: Transport protocol: SAS number of phys: 1, not all phys: 0, device slot number: 11 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 SLOT 13 [0,12] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 Additional Element Status: Transport protocol: SAS number of phys: 1, not all phys: 0, device slot number: 12 phy index: 0 SAS device type: expander device initiator port for: target port for: SMP attached SAS address: 0x5001b4d516ecc03f SAS address: 0x5001517e85c3efff phy identifier: 0x14 SLOT 14 [0,13] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 Additional Element Status: Transport protocol: SAS number of phys: 1, not all phys: 0, device slot number: 13 phy index: 0 SAS device type: expander device initiator port for: target port for: SMP attached SAS address: 0x5001b4d516ecc03f SAS address: 0x5001517e85c3efff phy identifier: 0x15 SLOT 15 [0,14] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 Additional Element Status: Transport protocol: SAS number of phys: 1, not all phys: 0, device slot number: 14 phy index: 0 SAS device type: expander device initiator port for: target port for: SMP attached SAS address: 0x5001b4d516ecc03f SAS address: 0x5001517e85c3efff phy identifier: 0x16 SLOT 16 [0,15] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 Additional Element Status: Transport protocol: SAS number of phys: 1, not all phys: 0, device slot number: 15 phy index: 0 SAS device type: expander device initiator port for: target port for: SMP attached SAS address: 0x5001b4d516ecc03f SAS address: 0x5001517e85c3efff phy identifier: 0x17 SLOT 17 [0,16] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 Additional Element Status: Transport protocol: SAS number of phys: 1, not all phys: 0, device slot number: 16 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 SLOT 18 [0,17] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 Additional Element Status: Transport protocol: SAS number of phys: 1, not all phys: 0, device slot number: 17 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 SLOT 19 [0,18] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: OK OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 Additional Element Status: Transport protocol: SAS number of phys: 1, not all phys: 0, device slot number: 18 phy index: 0 SAS device type: end device initiator port for: target port for: SSP attached SAS address: 0x5001b4d516ecc03f SAS address: 0x5000c5003011cb29 phy identifier: 0x0 SLOT 20 [0,19] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 Additional Element Status: Transport protocol: SAS number of phys: 1, not all phys: 0, device slot number: 19 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 SLOT 21 [0,20] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 Additional Element Status: Transport protocol: SAS number of phys: 1, not all phys: 0, device slot number: 20 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 SLOT 22 [0,21] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 Additional Element Status: Transport protocol: SAS number of phys: 1, not all phys: 0, device slot number: 21 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 SLOT 23 [0,22] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 Additional Element Status: Transport protocol: SAS number of phys: 1, not all phys: 0, device slot number: 22 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 SLOT 24 [0,23] Element type: Array device slot Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed OK=0, Reserved device=0, Hot spare=0, Cons check=0 In crit array=0, In failed array=0, Rebuild/remap=0, R/R abort=0 App client bypass A=0, Do not remove=0, Enc bypass A=0, Enc bypass B=0 Ready to insert=0, RMV=0, Ident=0, Report=0 App client bypass B=0, Fault sensed=0, Fault reqstd=0, Device off=0 Bypassed A=0, Bypassed B=0, Dev bypassed A=0, Dev bypassed B=0 Additional Element Status: Transport protocol: SAS number of phys: 1, not all phys: 0, device slot number: 23 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 EnclosureElementInSubEnclsr0 [1,-1] Element type: Enclosure Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Unsupported Ident=0, Time until power cycle=0, Failure indication=0 Warning indication=0, Requested power off duration=0 Failure requested=0, Warning requested=0 EnclosureElement01 [1,0] Element type: Enclosure Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: OK Ident=0, Time until power cycle=0, Failure indication=0 Warning indication=0, Requested power off duration=0 Failure requested=0, Warning requested=0 SAS Expander [2,-1] Element type: SAS expander Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Unsupported Ident=0, Fail=0 Expander0 [2,0] Element type: SAS expander Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: OK Ident=0, Fail=0 Additional Element Status: Transport protocol: SAS number of phys: 36 SAS address: 0x5001b4d516ecc03f Attached connector; other_element pairs: [0] no connector; SLOT 14 [0,13] etype: Array device slot [1] no connector; SLOT 13 [0,12] etype: Array device slot [2] no connector; SLOT 15 [0,14] etype: Array device slot [3] no connector; SLOT 16 [0,15] etype: Array device slot [4] no connector; SLOT 10 [0,9] etype: Array device slot [5] no connector; SLOT 09 [0,8] etype: Array device slot [6] no connector; SLOT 11 [0,10] etype: Array device slot [7] no connector; SLOT 12 [0,11] etype: Array device slot [8] no connector; SLOT 06 [0,5] etype: Array device slot [9] no connector; SLOT 05 [0,4] etype: Array device slot [10] no connector; SLOT 07 [0,6] etype: Array device slot [11] no connector; SLOT 08 [0,7] etype: Array device slot [12] no connector; SLOT 02 [0,1] etype: Array device slot [13] no connector; SLOT 01 [0,0] etype: Array device slot [14] no connector; SLOT 03 [0,2] etype: Array device slot [15] no connector; SLOT 04 [0,3] etype: Array device slot [16] Mini SAS HD 4x, pl=0 [2] [17] Mini SAS HD 4x, pl=0 [2] [18] Mini SAS HD 4x, pl=0 [2] [19] Mini SAS HD 4x, pl=0 [2] [20] Mini SAS HD 4x, pl=0 [1] [21] Mini SAS HD 4x, pl=0 [1] [22] Mini SAS HD 4x, pl=0 [1] [23] Mini SAS HD 4x, pl=0 [1] [24] Mini SAS HD 4x, pl=0 [0] [25] Mini SAS HD 4x, pl=0 [0] [26] Mini SAS HD 4x, pl=0 [0] [27] Mini SAS HD 4x, pl=0 [0] [28] no connector; SLOT 18 [0,17] etype: Array device slot [29] no connector; SLOT 17 [0,16] etype: Array device slot [30] no connector; SLOT 19 [0,18] etype: Array device slot [31] no connector; SLOT 20 [0,19] etype: Array device slot [32] no connector; SLOT 22 [0,21] etype: Array device slot [33] no connector; SLOT 21 [0,20] etype: Array device slot [34] no connector; SLOT 23 [0,22] etype: Array device slot [35] no connector; SLOT 24 [0,23] etype: Array device slot CoolingElementInSubEnclsr0 [3,-1] Element type: Cooling Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Unsupported Ident=0, Do not remove=0, Hot swap=0, Fail=0, Requested on=0 Off=0, Actual speed=0 rpm, Fan stopped Fan 01 [3,0] Element type: Cooling Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed Ident=0, Do not remove=0, Hot swap=0, Fail=0, Requested on=0 Off=1, Actual speed=0 rpm, Fan stopped Fan 02 [3,1] Element type: Cooling Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed Ident=0, Do not remove=0, Hot swap=0, Fail=0, Requested on=0 Off=1, Actual speed=0 rpm, Fan stopped Fan 03 [3,2] Element type: Cooling Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed Ident=0, Do not remove=0, Hot swap=0, Fail=0, Requested on=0 Off=1, Actual speed=0 rpm, Fan stopped Fan 04 [3,3] Element type: Cooling Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed Ident=0, Do not remove=0, Hot swap=0, Fail=0, Requested on=0 Off=1, Actual speed=0 rpm, Fan stopped CPUFan [3,4] Element type: Cooling Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: OK Ident=0, Do not remove=0, Hot swap=0, Fail=0, Requested on=0 Off=0, Actual speed=7500 rpm, Fan at highest speed TempSensorsInSubEnclsr0 [4,-1] Element type: Temperature sensor Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Unsupported Ident=0, Fail=0, OT failure=0, OT warning=0, UT failure=0 UT warning=0 Temperature: ENC. Temp [4,0] Element type: Temperature sensor Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: OK Ident=0, Fail=0, OT failure=0, OT warning=0, UT failure=0 UT warning=0 Temperature=49 C Chip Temp [4,1] Element type: Temperature sensor Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: OK Ident=0, Fail=0, OT failure=0, OT warning=0, UT failure=0 UT warning=0 Temperature=66 C VoltageSensorsInSubEnclsr0 [5,-1] Element type: Voltage sensor Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Unsupported Ident=0, Fail=0, Warn Over=0, Warn Under=0, Crit Over=0 Crit Under=0 Voltage: 0.00 Volts 0.95V [5,0] Element type: Voltage sensor Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: OK Ident=0, Fail=0, Warn Over=0, Warn Under=0, Crit Over=0 Crit Under=0 Voltage: 0.94 Volts 1.8V [5,1] Element type: Voltage sensor Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: OK Ident=0, Fail=0, Warn Over=0, Warn Under=0, Crit Over=0 Crit Under=0 Voltage: 1.80 Volts ConnectorsInSubEnclsr0 [6,-1] Element type: SAS connector Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Unsupported Ident=0, No information Connector physical link=0x0, Mated=0, Fail=0, OC=0 Connector00 [6,0] Element type: SAS connector Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: OK Ident=0, Mini SAS HD 4x receptacle (SFF-8644) [max 4 phys] Connector physical link=0x0, Mated=0, Fail=0, OC=0 Connector01 [6,1] Element type: SAS connector Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: OK Ident=0, Mini SAS HD 4x receptacle (SFF-8644) [max 4 phys] Connector physical link=0x0, Mated=0, Fail=0, OC=0 Connector02 [6,2] Element type: SAS connector Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: OK Ident=0, Mini SAS HD 4x receptacle (SFF-8644) [max 4 phys] Connector physical link=0x0, Mated=0, Fail=0, OC=0 PowerSupplyInSubEnclsr0 [7,-1] Element type: Power supply Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Unsupported Ident=0, Do not remove=0, DC overvoltage=0, DC undervoltage=0 DC overcurrent=0, Hot swap=0, Fail=0, Requested on=0, Off=0 Overtmp fail=0, Temperature warn=0, AC fail=0, DC fail=0 PowerSupply01 [7,0] Element type: Power supply Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed Ident=0, Do not remove=0, DC overvoltage=0, DC undervoltage=0 DC overcurrent=0, Hot swap=0, Fail=0, Requested on=1, Off=0 Overtmp fail=0, Temperature warn=0, AC fail=0, DC fail=0 PowerSupply02 [7,1] Element type: Power supply Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Not installed Ident=0, Do not remove=0, DC overvoltage=0, DC undervoltage=0 DC overcurrent=0, Hot swap=0, Fail=0, Requested on=1, Off=0 Overtmp fail=0, Temperature warn=0, AC fail=0, DC fail=0 AudibleAlarmInSubEnclsr0 [8,-1] Element type: Audible alarm Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: Unsupported Ident=0, Fail=0, Request mute=0, Mute=0, Remind=0 Tone indicator: Info=0, Non-crit=0, Crit=0, Unrecov=0 Audible-Alarm [8,0] Element type: Audible alarm Enclosure Status: Predicted failure=0, Disabled=0, Swap=0, status: OK Ident=0, Fail=0, Request mute=0, Mute=0, Remind=0 Tone indicator: Info=0, Non-crit=0, Crit=0, Unrecov=0 Join output completed, now output rest of dpages Supported diagnostic pages diagnostic page: Supported Diagnostic Pages [sdp] [0x0] Configuration (SES) [cf] [0x1] Enclosure Status/Control (SES) [ec,es] [0x2] String In/Out (SES) [str] [0x4] Threshold In/Out (SES) [th] [0x5] Element Descriptor (SES) [ed] [0x7] Additional Element Status (SES-2) [aes] [0xa] Supported SES Diagnostic Pages (SES-2) [ssp] [0xd] Download Microcode (SES-2) [dm] [0xe] Subenclosure Nickname (SES-2) [snic] [0xf] Protocol Specific (SAS transport) [] [0x3f] Configuration diagnostic page: number of secondary subenclosures: 0 generation code: 0x0 enclosure descriptor list: Subenclosure identifier: 0 [primary] relative ES process id: 1, number of ES processes: 1 number of type descriptor headers: 9 enclosure logical identifier (hex): d5b401503fc0ec16 enclosure vendor: Areca product: ARC-802801.33.63 rev: 0133 Vendor specific data: 11 22 33 44 55 00 00 00 ."3DU... type descriptor header and text list: Element type: Array device slot, subenclosure id: 0 number of possible elements: 24 text: ArrayDevicesInSubEnclsr0 Element type: Enclosure, subenclosure id: 0 number of possible elements: 1 text: EnclosureElementInSubEnclsr0 Element type: SAS expander, subenclosure id: 0 number of possible elements: 1 text: SAS Expander Element type: Cooling, subenclosure id: 0 number of possible elements: 5 text: CoolingElementInSubEnclsr0 Element type: Temperature sensor, subenclosure id: 0 number of possible elements: 2 text: TempSensorsInSubEnclsr0 Element type: Voltage sensor, subenclosure id: 0 number of possible elements: 2 text: VoltageSensorsInSubEnclsr0 Element type: SAS connector, subenclosure id: 0 number of possible elements: 3 text: ConnectorsInSubEnclsr0 Element type: Power supply, subenclosure id: 0 number of possible elements: 2 text: PowerSupplyInSubEnclsr0 Element type: Audible alarm, subenclosure id: 0 number of possible elements: 1 text: AudibleAlarmInSubEnclsr0 String In diagnostic page (for primary subenclosure): 57 65 20 68 61 76 65 20 69 6d 70 6c 65 6d 65 6e We have implemen 74 65 64 20 53 74 72 69 6e 67 20 49 6e 20 44 69 ted String In Di 61 67 6e 6f 73 74 69 63 20 50 61 67 65 00 agnostic Page. Threshold in diagnostic page: INVOP=0 generation code: 0x0 Threshold status descriptor list Element type: Temperature sensor, subenclosure_identifier: 0 [ti=4] Overall descriptor: high critical=, high warning= low warning=, low critical= (in Celsius) Element 0 descriptor: high critical=, high warning= low warning=, low critical= (in Celsius) Element 1 descriptor: high critical=, high warning= low warning=, low critical= (in Celsius) Element type: Voltage sensor, subenclosure_identifier: 0 [ti=5] Overall descriptor: high critical=0.0 %, high warning=0.0 % (above nominal voltage) low warning=0.0 %, low critical=0.0 % (below nominal voltage) Element 0 descriptor: high critical=0.0 %, high warning=0.0 % (above nominal voltage) low warning=0.0 %, low critical=0.0 % (below nominal voltage) Element 1 descriptor: high critical=0.0 %, high warning=0.0 % (above nominal voltage) low warning=0.0 %, low critical=0.0 % (below nominal voltage) Supported SES diagnostic pages diagnostic page: Configuration (SES) [cf] [0x1] Enclosure Status/Control (SES) [ec,es] [0x2] String In/Out (SES) [str] [0x4] Threshold In/Out (SES) [th] [0x5] Element Descriptor (SES) [ed] [0x7] Additional Element Status (SES-2) [aes] [0xa] Supported SES Diagnostic Pages (SES-2) [ssp] [0xd] Download Microcode (SES-2) [dm] [0xe] Subenclosure Nickname (SES-2) [snic] [0xf] Download microcode status diagnostic page: number of secondary subenclosures: 0 generation code: 0x0 Download microcode status descriptor list: subenclosure identifier: 0 [primary] download microcode status: No download microcode operation in progress [0x0] download microcode additional status: 0x0 download microcode maximum size: 1048576 bytes download microcode expected buffer id: 0x0 download microcode expected buffer offset: 0 Subenclosure nickname status diagnostic page: number of secondary subenclosures: 0 generation code: 0x0 subenclosure identifier: 0x0 subenclosure nickname status: 0x0 subenclosure nickname additional status: 0x0 subenclosure nickname language code: en subenclosure nickname: Eval Board Nickname Simulator