// Copyright (c) 2013 DMTF.  All rights reserved.
   [Experimental, Version ( "2.44.0" ), 
    UMLPackagePath ( "CIM::System::Diagnostics" ), 
    Description ( 
       "This class defines the additional settings to be used for "
       "system memory diagnostic tests." )]
class CIM_MemoryDiagnosticSettingData : CIM_DiagnosticSettingData {

      [Description ( 
          "An array that specifies either a base address, an "
          "address range or a discrete set of addresses.\n"
          "* Address[0] as the base address\n"
          "* Address[0] and Address[1] as an address range\n"
          "* Address[0], Address[1], Address[2], etc as a discrete "
          "set of addresses\n"
          "The values are used by a test to logically address memory.\n"
          "The default value will depend upon the specific test. If "
          "no value is specified by the client, the vendor-defined "
          "default value will be used. The vendor-defined default "
          "value is advertised by using the default instance of "
          "CIM_MemoryDiagnosticSettingData. A null value indicates "
          "that lowest accessible address shall be used as the base address.\n"
          "\n"
          "To test all available memory, a client can simply "
          "specify both Address[] and NumberOfBytes as null." ), 
       ModelCorrespondence { 
          "CIM_MemoryDiagnosticSettingData.NumberOfBytes" }]
   string Address[];

      [Description ( 
          "The number of bytes specified by the client to be "
          "written and read during a test. If a value is specified, "
          "it will indicate the number of address locations to be "
          "tested starting from the base address. If null, all "
          "available memory will be tested from the base address.\n"
          "To test all available memory, a client can simply "
          "specify both Address and NumberOfBytes as null." ), 
       ModelCorrespondence { 
          "CIM_MemoryDiagnosticSettingData.Address" }]
   uint64 NumberOfBytes;

      [Description ( 
          "The target is identified by a device moniker which is "
          "the unique name for the physical memory device under "
          "test. It can be anyone of the following.\n"
          "* The Object path of the physical memory device.\n"
          "* The ElementName of the physical memory device.\n"
          "* A unique user friendly name not in the model (such as, "
          "asset name).\n"
          "Whichever moniker is used it shall be used consistently "
          "for all devices and applicable tests." )]
   string TargetDevice;

      [Description ( 
          "An 8-bit value used to test memory data access.\n"
          "A specific data pattern is sometimes required for the "
          "test to be effective.\n"
          "The default value will depend upon the specific test. If "
          "no value is specified by the client, the vendor-defined "
          "default value will be used. The vendor-defined default "
          "value is advertised by using the default instance of "
          "CIM_MemoryDiagnosticSettingData. This value may be null "
          "if the property is not applicable to the test." ), 
       ModelCorrespondence { 
          "CIM_MemoryDiagnosticServiceCapabilities.DataPattern" }]
   uint8 DataPattern;

      [Description ( 
          "The seed for generating a random number used within a "
          "test. Allows control of a test with a pseudo-random "
          "behavior. If no value is specified by the client, the "
          "vendor-defined default value will be used. The "
          "vendor-defined default value is advertised by using the "
          "default instance of CIM_MemoryDiagnosticSettingData. "
          "This value may be null if the property is not applicable "
          "to the test." ), 
       ModelCorrespondence { 
          "CIM_MemoryDiagnosticServiceCapabilities.Seed" }]
   uint32 Seed;

      [Description ( 
          "Specifies a wait time to apply in a test. This can be a "
          "date and time or an inteval. If no value is specified by "
          "the client, the vendor-defined default value will be "
          "used. The vendor-defined default value is advertised by "
          "using the default instance of "
          "CIM_MemoryDiagnosticSettingData. This value may be null "
          "if the property is not applicable to the test." ), 
       ModelCorrespondence { 
          "CIM_MemoryDiagnosticServiceCapabilities.WaitTime" }]
   datetime WaitTime;


};