Mode pages for SCSI Parallel Interface (SPI-5) transport protocol:
Disconnect-reconnect (SPI) [dr: 0x2] mode page:
  BFR        [0x02:7:8 ]  Buffer full ratio
  BER        [0x03:7:8 ]  Buffer empty ratio
  BIL        [0x04:7:16]  Bus inactivity limit (100 us)
  PDTL       [0x06:7:16]  Physical disconnect time limit (100 us)
  CTL        [0x08:7:16]  Connect time limit (100 us)
  MBS        [0x0a:7:16]  Maximum burst size (512 bytes)
  EMDP       [0x0c:7:1 ]  Enable modify data pointers
  FA         [0x0c:6:3 ]  Fair arbitration
  DIMM       [0x0c:3:1 ]  Disconnect immediate
  DTDC       [0x0c:2:3 ]  Data transfer disconnect control
lu: control (SPI) [luc: 0x18] mode page:
  LUPID      [0x02:3:4 ]  Logical unit's (transport) protocol identifier
port: short format (SPI) [psf: 0x19] mode page:
  PPID       [0x02:3:4 ]  Port's (transport) protocol identifier
  STT        [0x04:7:16]  Synchronous transfer timeout (ms)
port: margin control (SPI) [mc: 0x19,0x1] mode page:
  PPID_1     [0x05:3:4 ]  Port's (transport) protocol identifier
  DS         [0x07:7:4 ]  Driver strength
  DA         [0x08:7:4 ]  Driver asymmetry
  DP         [0x08:3:4 ]  Driver precompensation
  DSR        [0x09:7:4 ]  Driver slew rate
port: saved training config value (SPI) [stc: 0x19,0x2] mode page:
  PPID_2     [0x05:3:4 ]  Port's (transport) protocol identifier
  DB0        [0x0a:7:32]  DB(0) value
  DB1        [0x0e:7:32]  DB(1) value
  DB2        [0x12:7:32]  DB(2) value
  DB3        [0x16:7:32]  DB(3) value
  DB4        [0x1a:7:32]  DB(4) value
  DB5        [0x1e:7:32]  DB(5) value
  DB6        [0x22:7:32]  DB(6) value
  DB7        [0x26:7:32]  DB(7) value
  DB8        [0x2a:7:32]  DB(8) value
  DB9        [0x2e:7:32]  DB(9) value
  DB10       [0x32:7:32]  DB(10) value
  DB11       [0x36:7:32]  DB(11) value
  DB12       [0x3a:7:32]  DB(12) value
  DB13       [0x3e:7:32]  DB(13) value
  DB14       [0x42:7:32]  DB(14) value
  DB15       [0x46:7:32]  DB(15) value
  P_CRCA     [0x4a:7:32]  P_CRCA value
  P1         [0x4e:7:32]  P1 value
  BSY        [0x52:7:32]  BSY value
  SEL        [0x56:7:32]  SEL value
  RST        [0x5a:7:32]  RST value
  REQ        [0x5e:7:32]  REQ value
  ACK        [0x62:7:32]  ACK value
  ATN        [0x66:7:32]  ATN value
  C_D        [0x6a:7:32]  C/D value
  I_O        [0x6e:7:32]  I/O value
  MSG        [0x72:7:32]  MSG value
port: negotiated settings (SPI) [ns: 0x19,0x3] mode page:
  PPID_3     [0x05:3:4 ]  Port's (transport) protocol identifier
  TPF        [0x06:7:8 ]  Transfer period factor
  RAO        [0x08:7:8 ]  REQ/ACK offset
  TWE        [0x09:7:8 ]  Transfer width exponent
  POB        [0x0a:6:7 ]  Protocol option bits
  TM         [0x0b:3:2 ]  Transceiver mode
  SPE        [0x0b:1:1 ]  Sent PCOMP_EN bit (for current I_T nexus)
  RPE        [0x0b:0:1 ]  Received PCOMP_EN bit (for current I_T nexus)
port: report transfer capabilities (SPI) [rtc: 0x19,0x4] mode page:
  PPID_4     [0x05:3:4 ]  Port's (transport) protocol identifier
  MTPF       [0x06:7:8 ]  Minimum transfer period factor
  MRAO       [0x08:7:8 ]  Maximum REQ/ACK offset
  MTWE       [0x09:7:8 ]  Maximum transfer width exponent
  POBS       [0x0a:7:8 ]  Protocol option bits supported