Mode pages for Fibre Channel Protocol for SCSI (FCP-5) transport protocol:
Disconnect-reconnect (FCP) [dr: 0x2] mode page:
  BFR        [0x02:7:8 ]  Buffer full ratio
  BER        [0x03:7:8 ]  Buffer empty ratio
  BIL        [0x04:7:16]  Bus inactivity limit (transmission words)
  DTL        [0x06:7:16]  Disconnect time limit (128 transmission words)
  CTL        [0x08:7:16]  Connect time limit (128 transmission words)
  MBS        [0x0a:7:16]  Maximum burst size (512 bytes)
  EMDP       [0x0c:7:1 ]  Enable modify data pointers
  FAA        [0x0c:6:1 ]  Fairness access A [FCP_DATA]
  FAB        [0x0c:5:1 ]  Fairness access B [FCP_XFER]
  FAC        [0x0c:4:1 ]  Fairness access C [FCP_RSP]
  FBS        [0x0e:7:16]  First burst size (512 bytes)
lu: control (FCP) [luc: 0x18] mode page:
  LUPID      [0x02:3:4 ]  Logical unit's (transport) protocol identifier
  EPDC       [0x03:0:1 ]  Enable precise delivery checking
port: control (FCP) [pc: 0x19] mode page:
  PPID       [0x02:3:4 ]  Port's (transport) protocol identifier
  DTFD       [0x03:7:1 ]  Disable target fabric discovery
  PLPB       [0x03:6:1 ]  Prevent loop port bypass
  DDIS       [0x03:5:1 ]  Disable discovery
  DLM        [0x03:4:1 ]  Disable loop master
  RHA        [0x03:3:1 ]  Require hard address
  ALWI       [0x03:2:1 ]  Allow login without loop initialization
  DTIPE      [0x03:1:1 ]  Disable target initialized port enable
  DTOLI      [0x03:0:1 ]  Disable target originated loop initialization
  RRTVU      [0x06:2:3 ]  Resource recovery timeout value unit
  RR_TOV     [0x06:2:3 ]  Resource recovery timeout value unit
  SIRRTV     [0x07:7:8 ]  Sequence initiative resource recovery timeout value