59 lines · plain
1What: /sys/bus/platform/devices/GOOG000C\:00/boot_on_ac2Date: April 20193KernelVersion: 5.34Description:5 Boot on AC is a policy which makes the device boot from S56 when AC power is connected. This is useful for users who7 want to run their device headless or with a dock.8 9 Input should be parseable by kstrtou8() to 0 or 1.10 11What: /sys/bus/platform/devices/GOOG000C\:00/build_date12Date: May 201913KernelVersion: 5.314Description:15 Display Wilco Embedded Controller firmware build date.16 Output will a MM/DD/YY string.17 18What: /sys/bus/platform/devices/GOOG000C\:00/build_revision19Date: May 201920KernelVersion: 5.321Description:22 Display Wilco Embedded Controller build revision.23 Output will a version string be similar to the example below:24 d2592cae025 26What: /sys/bus/platform/devices/GOOG000C\:00/model_number27Date: May 201928KernelVersion: 5.329Description:30 Display Wilco Embedded Controller model number.31 Output will a version string be similar to the example below:32 08B633 34What: /sys/bus/platform/devices/GOOG000C\:00/usb_charge35Date: October 201936KernelVersion: 5.537Description:38 Control the USB PowerShare Policy. USB PowerShare is a policy39 which affects charging via the special USB PowerShare port40 (marked with a small lightning bolt or battery icon) when in41 low power states:42 43 - In S0, the port will always provide power.44 - In S0ix, if usb_charge is enabled, then power will be45 supplied to the port when on AC or if battery is > 50%.46 Else no power is supplied.47 - In S5, if usb_charge is enabled, then power will be supplied48 to the port when on AC. Else no power is supplied.49 50 Input should be either "0" or "1".51 52What: /sys/bus/platform/devices/GOOG000C\:00/version53Date: May 201954KernelVersion: 5.355Description:56 Display Wilco Embedded Controller firmware version.57 The format of the string is x.y.z. Where x is major, y is minor58 and z is the build number. For example: 95.00.0659