43 lines · plain
1Bindings for Texas Instruments CDCE706 programmable 3-PLL clock2synthesizer/multiplier/divider.3 4Reference: https://www.ti.com/lit/ds/symlink/cdce706.pdf5 6I2C device node required properties:7- compatible: shall be "ti,cdce706".8- reg: i2c device address, shall be in range [0x68...0x6b].9- #clock-cells: from common clock binding; shall be set to 1.10- clocks: from common clock binding; list of parent clock11 handles, shall be reference clock(s) connected to CLK_IN012 and CLK_IN1 pins.13- clock-names: shall be clk_in0 and/or clk_in1. Use clk_in014 in case of crystal oscillator or differential signal input15 configuration. Use clk_in0 and clk_in1 in case of independent16 single-ended LVCMOS inputs configuration.17 18Example:19 20 clocks {21 clk54: clk54 {22 #clock-cells = <0>;23 compatible = "fixed-clock";24 clock-frequency = <54000000>;25 };26 };27 ...28 i2c0: i2c-master@d090000 {29 ...30 cdce706: clock-synth@69 {31 compatible = "ti,cdce706";32 #clock-cells = <1>;33 reg = <0x69>;34 clocks = <&clk54>;35 clock-names = "clk_in0";36 };37 };38 ...39 simple-audio-card,codec {40 ...41 clocks = <&cdce706 4>;42 };43