481 lines · yaml
1# SPDX-License-Identifier: GPL-2.0-only2%YAML 1.23---4$id: http://devicetree.org/schemas/connector/usb-connector.yaml#5$schema: http://devicetree.org/meta-schemas/core.yaml#6 7title: USB Connector8 9maintainers:10 - Rob Herring <robh@kernel.org>11 12description:13 A USB connector node represents a physical USB connector. It should be a child14 of a USB interface controller or a separate node when it is attached to both15 MUX and USB interface controller.16 17properties:18 compatible:19 oneOf:20 - enum:21 - usb-a-connector22 - usb-b-connector23 - usb-c-connector24 25 - items:26 - const: gpio-usb-b-connector27 - const: usb-b-connector28 29 - items:30 - const: samsung,usb-connector-11pin31 - const: usb-b-connector32 33 reg:34 maxItems: 135 36 label:37 description: Symbolic name for the connector.38 39 type:40 description: Size of the connector, should be specified in case of41 non-fullsize 'usb-a-connector' or 'usb-b-connector' compatible42 connectors.43 $ref: /schemas/types.yaml#/definitions/string44 45 enum:46 - mini47 - micro48 49 self-powered:50 description: Set this property if the USB device has its own power source.51 type: boolean52 53 # The following are optional properties for "usb-b-connector".54 id-gpios:55 description: An input gpio for USB ID pin.56 maxItems: 157 58 vbus-gpios:59 description: An input gpio for USB VBus pin, used to detect presence of60 VBUS 5V.61 maxItems: 162 63 vbus-supply:64 description: A phandle to the regulator for USB VBUS if needed when host65 mode or dual role mode is supported.66 Particularly, if use an output GPIO to control a VBUS regulator, should67 model it as a regulator. See bindings/regulator/fixed-regulator.yaml68 69 power-role:70 description: Determines the power role that the Type C connector will71 support. "dual" refers to Dual Role Port (DRP).72 $ref: /schemas/types.yaml#/definitions/string73 74 enum:75 - source76 - sink77 - dual78 79 try-power-role:80 description: Preferred power role.81 $ref: /schemas/types.yaml#/definitions/string82 83 enum:84 - source85 - sink86 - dual87 88 data-role:89 description: Data role if Type C connector supports USB data. "dual" refers90 Dual Role Device (DRD).91 $ref: /schemas/types.yaml#/definitions/string92 93 enum:94 - host95 - device96 - dual97 98 typec-power-opmode:99 description: Determines the power operation mode that the Type C connector100 will support and will advertise through CC pins when it has no power101 delivery support.102 - "default" corresponds to default USB voltage and current defined by the103 USB 2.0 and USB 3.2 specifications, 5V 500mA for USB 2.0 ports and104 5V 900mA or 1500mA for USB 3.2 ports in single-lane or dual-lane105 operation respectively.106 - "1.5A" and "3.0A", 5V 1.5A and 5V 3.0A respectively, as defined in USB107 Type-C Cable and Connector specification, when Power Delivery is not108 supported.109 $ref: /schemas/types.yaml#/definitions/string110 enum:111 - default112 - 1.5A113 - 3.0A114 115 pd-disable:116 description: Set this property if the Type-C connector has no power delivery support.117 type: boolean118 119 # The following are optional properties for "usb-c-connector" with power120 # delivery support.121 sink-vdos:122 description: An array of u32 with each entry, a Vendor Defined Message Object (VDO),123 providing additional information corresponding to the product, the detailed bit124 definitions and the order of each VDO can be found in125 "USB Power Delivery Specification Revision 3.0, Version 2.0 + ECNs 2020-12-10"126 chapter 6.4.4.3.1 Discover Identity. User can specify the VDO array via127 VDO_IDH/_CERT/_PRODUCT/_UFP/_DFP/_PCABLE/_ACABLE(1/2)/_VPD() defined in128 dt-bindings/usb/pd.h.129 minItems: 3130 maxItems: 6131 $ref: /schemas/types.yaml#/definitions/uint32-array132 133 sink-vdos-v1:134 description: An array of u32 with each entry, a Vendor Defined Message Object (VDO),135 providing additional information corresponding to the product, the detailed bit136 definitions and the order of each VDO can be found in137 "USB Power Delivery Specification Revision 2.0, Version 1.3" chapter 6.4.4.3.1 Discover138 Identity. User can specify the VDO array via VDO_IDH/_CERT/_PRODUCT/_CABLE/_AMA defined in139 dt-bindings/usb/pd.h.140 minItems: 3141 maxItems: 6142 $ref: /schemas/types.yaml#/definitions/uint32-array143 144 accessory-mode-audio:145 type: boolean146 description: Whether the device supports Audio Adapter Accessory Mode. This147 is only necessary if there are no other means to discover supported148 alternative modes (e.g. through the UCSI firmware interface).149 150 accessory-mode-debug:151 type: boolean152 description: Whether the device supports Debug Accessory Mode. This153 is only necessary if there are no other means to discover supported154 alternative modes (e.g. through the UCSI firmware interface).155 156 altmodes:157 type: object158 description: List of Alternative Modes supported by the schematics on the159 particular device. This is only necessary if there are no other means to160 discover supported alternative modes (e.g. through the UCSI firmware161 interface).162 163 additionalProperties: false164 165 patternProperties:166 "^(displayport)$":167 type: object168 description:169 A single USB-C Alternative Mode as supported by the USB-C connector logic.170 171 additionalProperties: false172 173 properties:174 svid:175 $ref: /schemas/types.yaml#/definitions/uint16176 description: Unique value assigned by USB-IF to the Vendor / AltMode.177 enum: [ 0xff01 ]178 vdo:179 $ref: /schemas/types.yaml#/definitions/uint32180 description: VDO returned by Discover Modes USB PD command.181 182 port:183 $ref: /schemas/graph.yaml#/properties/port184 description: OF graph bindings modeling a data bus to the connector, e.g.185 there is a single High Speed (HS) port present in this connector. If there186 is more than one bus (several port, with 'reg' property), they can be grouped187 under 'ports'.188 189 ports:190 $ref: /schemas/graph.yaml#/properties/ports191 description: OF graph bindings modeling any data bus to the connector192 unless the bus is between parent node and the connector. Since a single193 connector can have multiple data buses every bus has an assigned OF graph194 port number as described below.195 196 properties:197 port@0:198 $ref: /schemas/graph.yaml#/properties/port199 description: High Speed (HS), present in all connectors.200 201 port@1:202 $ref: /schemas/graph.yaml#/properties/port203 description: Super Speed (SS), present in SS capable connectors.204 205 port@2:206 $ref: /schemas/graph.yaml#/properties/port207 description: Sideband Use (SBU), present in USB-C. This describes the208 alternate mode connection of which SBU is a part.209 210 required:211 - port@0212 213 new-source-frs-typec-current:214 description: Initial current capability of the new source when vSafe5V215 is applied during PD3.0 Fast Role Swap. "Table 6-14 Fixed Supply PDO - Sink"216 of "USB Power Delivery Specification Revision 3.0, Version 1.2" provides the217 different power levels and "6.4.1.3.1.6 Fast Role Swap USB Type-C Current"218 provides a detailed description of the field. The sink PDO from current source219 reflects the current source's(i.e. transmitter of the FRS signal) power220 requirement during fr swap. The current sink (i.e. receiver of the FRS signal),221 a.k.a new source, should check if it will be able to satisfy the current source's,222 new sink's, requirement during frswap before enabling the frs signal reception.223 This property refers to maximum current capability that the current sink can224 satisfy. During FRS, VBUS voltage is at 5V, as the partners are in implicit225 contract, hence, the power level is only a function of the current capability.226 "1" refers to default USB power level as described by "Table 6-14 Fixed Supply PDO - Sink".227 "2" refers to 1.5A@5V.228 "3" refers to 3.0A@5V.229 $ref: /schemas/types.yaml#/definitions/uint32230 enum: [1, 2, 3]231 232 slow-charger-loop:233 description: Allows PMIC charger loops which are slow(i.e. cannot meet the 15ms deadline) to234 still comply to pSnkStby i.e Maximum power that can be consumed by sink while in Sink Standby235 state as defined in 7.4.2 Sink Electrical Parameters of USB Power Delivery Specification236 Revision 3.0, Version 1.2. When the property is set, the port requests pSnkStby(2.5W -237 5V@500mA) upon entering SNK_DISCOVERY(instead of 3A or the 1.5A, Rp current advertised, during238 SNK_DISCOVERY) and the actual current limit after reception of PS_Ready for PD link or during239 SNK_READY for non-pd link.240 type: boolean241 242 capabilities:243 description: A child node to contain all the selectable USB Power Delivery capabilities.244 type: object245 246 patternProperties:247 "^caps-[0-9]+$":248 description: Child nodes under "capabilities" node. Each node contains a selectable USB249 Power Delivery capability.250 type: object251 $ref: "#/$defs/capabilities"252 unevaluatedProperties: false253 254 additionalProperties: false255 256dependencies:257 sink-vdos-v1: [ sink-vdos ]258 sink-vdos: [ sink-vdos-v1 ]259 260required:261 - compatible262 263$defs:264 capabilities:265 type: object266 267 properties:268 source-pdos:269 description: An array of u32 with each entry providing supported power270 source data object(PDO), the detailed bit definitions of PDO can be found271 in "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.2272 Source_Capabilities Message, the order of each entry(PDO) should follow273 the PD spec chapter 6.4.1. Required for power source and power dual role.274 User can specify the source PDO array via PDO_FIXED/BATT/VAR/PPS_APDO()275 defined in dt-bindings/usb/pd.h.276 minItems: 1277 maxItems: 7278 $ref: /schemas/types.yaml#/definitions/uint32-array279 280 sink-pdos:281 description: An array of u32 with each entry providing supported power sink282 data object(PDO), the detailed bit definitions of PDO can be found in283 "Universal Serial Bus Power Delivery Specification" chapter 6.4.1.3284 Sink Capabilities Message, the order of each entry(PDO) should follow the285 PD spec chapter 6.4.1. Required for power sink and power dual role. User286 can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined287 in dt-bindings/usb/pd.h.288 minItems: 1289 maxItems: 7290 $ref: /schemas/types.yaml#/definitions/uint32-array291 292 op-sink-microwatt:293 description: Sink required operating power in microwatt, if source can't294 offer the power, Capability Mismatch is set. Required for power sink and295 power dual role.296 297allOf:298 - $ref: "#/$defs/capabilities"299 - if:300 properties:301 compatible:302 contains:303 const: gpio-usb-b-connector304 then:305 anyOf:306 - required:307 - vbus-gpios308 - required:309 - id-gpios310 311 - if:312 properties:313 compatible:314 contains:315 const: samsung,usb-connector-11pin316 then:317 properties:318 type:319 const: micro320 321anyOf:322 - not:323 required:324 - typec-power-opmode325 - new-source-frs-typec-current326 327unevaluatedProperties: false328 329examples:330 # Micro-USB connector with HS lines routed via controller (MUIC).331 - |332 muic-max77843 {333 usb_con1: connector {334 compatible = "usb-b-connector";335 label = "micro-USB";336 type = "micro";337 };338 };339 340 # USB-C connector attached to CC controller (s2mm005), HS lines routed341 # to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort.342 # DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.343 - |344 ccic: s2mm005 {345 usb_con2: connector {346 compatible = "usb-c-connector";347 label = "USB-C";348 349 altmodes {350 displayport {351 svid = /bits/ 16 <0xff01>;352 vdo = <0x00001c46>;353 };354 };355 356 ports {357 #address-cells = <1>;358 #size-cells = <0>;359 360 port@0 {361 reg = <0>;362 usb_con_hs: endpoint {363 remote-endpoint = <&max77865_usbc_hs>;364 };365 };366 port@1 {367 reg = <1>;368 usb_con_ss: endpoint {369 remote-endpoint = <&usbdrd_phy_ss>;370 };371 };372 port@2 {373 reg = <2>;374 usb_con_sbu: endpoint {375 remote-endpoint = <&dp_aux>;376 };377 };378 };379 };380 };381 382 # USB-C connector attached to a typec port controller(ptn5110), which has383 # power delivery support and enables drp.384 - |385 #include <dt-bindings/usb/pd.h>386 typec: ptn5110 {387 usb_con3: connector {388 compatible = "usb-c-connector";389 label = "USB-C";390 power-role = "dual";391 try-power-role = "sink";392 source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;393 sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)394 PDO_VAR(5000, 12000, 2000)>;395 op-sink-microwatt = <10000000>;396 };397 };398 399 # USB-C connector attached to SoC with a single High-Speed controller400 - |401 connector {402 compatible = "usb-c-connector";403 label = "USB-C";404 405 port {406 high_speed_ep: endpoint {407 remote-endpoint = <&usb_hs_ep>;408 };409 };410 };411 412 # USB-C connector attached to SoC and USB3 typec port controller(hd3ss3220)413 # with SS 2:1 MUX. HS lines routed to SoC, SS lines routed to the MUX and414 # the output of MUX is connected to the SoC.415 - |416 connector {417 compatible = "usb-c-connector";418 label = "USB-C";419 data-role = "dual";420 421 ports {422 #address-cells = <1>;423 #size-cells = <0>;424 port@0 {425 reg = <0>;426 hs_ep: endpoint {427 remote-endpoint = <&usb3_hs_ep>;428 };429 };430 port@1 {431 reg = <1>;432 ss_ep: endpoint {433 remote-endpoint = <&hd3ss3220_in_ep>;434 };435 };436 };437 };438 439 # USB connector with GPIO control lines440 - |441 #include <dt-bindings/gpio/gpio.h>442 443 usb {444 connector {445 compatible = "gpio-usb-b-connector", "usb-b-connector";446 type = "micro";447 id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;448 vbus-supply = <&usb_p0_vbus>;449 };450 };451 452 # Micro-USB connector with HS lines routed via controller (MUIC) and MHL453 # lines connected to HDMI-MHL bridge (sii8620) on Samsung Exynos5433-based454 # mobile phone455 - |456 muic-max77843 {457 usb_con4: connector {458 compatible = "samsung,usb-connector-11pin", "usb-b-connector";459 label = "micro-USB";460 type = "micro";461 462 ports {463 #address-cells = <1>;464 #size-cells = <0>;465 466 port@0 {467 reg = <0>;468 muic_to_usb: endpoint {469 remote-endpoint = <&usb_to_muic>;470 };471 };472 port@3 {473 reg = <3>;474 usb_con_mhl: endpoint {475 remote-endpoint = <&sii8620_mhl>;476 };477 };478 };479 };480 };481