27 lines · plain
1Himax HX8357D display panels2 3This binding is for display panels using a Himax HX8357D controller in SPI4mode, such as the Adafruit 3.5" TFT for Raspberry Pi.5 6Required properties:7- compatible: "adafruit,yx350hv15", "himax,hx8357d"8- dc-gpios: D/C pin9- reg: address of the panel on the SPI bus10 11The node for this driver must be a child node of a SPI controller, hence12all mandatory properties described in ../spi/spi-bus.txt must be specified.13 14Optional properties:15- rotation: panel rotation in degrees counter clockwise (0,90,180,270)16- backlight: phandle of the backlight device attached to the panel17 18Example:19 display@0{20 compatible = "adafruit,yx350hv15", "himax,hx8357d";21 reg = <0>;22 spi-max-frequency = <32000000>;23 dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;24 rotation = <90>;25 backlight = <&backlight>;26 };27