brintos

brintos / linux-shallow public Read only

0
0
Text · 2.4 KiB · 59a3737 Raw
106 lines · yaml
1# SPDX-License-Identifier: GPL-2.02%YAML 1.23---4$id: http://devicetree.org/schemas/display/panel/tpo,tpg110.yaml#5$schema: http://devicetree.org/meta-schemas/core.yaml#6 7title: TPO TPG110 Panel8 9maintainers:10  - Linus Walleij <linus.walleij@linaro.org>11  - Thierry Reding <thierry.reding@gmail.com>12 13description: |+14  This panel driver is a component that acts as an intermediary15  between an RGB output and a variety of panels. The panel16  driver is strapped up in electronics to the desired resolution17  and other properties, and has a control interface over 3WIRE18  SPI. By talking to the TPG110 over SPI, the strapped properties19  can be discovered and the hardware is therefore mostly20  self-describing.21 22         +--------+23  SPI -> |  TPO   | -> physical display24  RGB -> | TPG110 |25         +--------+26 27  If some electrical strap or alternate resolution is desired,28  this can be set up by taking software control of the display29  over the SPI interface. The interface can also adjust30  for properties of the display such as gamma correction and31  certain electrical driving levels.32 33  The TPG110 does not know the physical dimensions of the panel34  connected, so this needs to be specified in the device tree.35 36  It requires a GPIO line for control of its reset line.37 38  The serial protocol has line names that resemble I2C but the39  protocol is not I2C but 3WIRE SPI.40 41 42allOf:43  - $ref: panel-common.yaml#44  - $ref: /schemas/spi/spi-peripheral-props.yaml#45 46properties:47  compatible:48    oneOf:49      - items:50          - enum:51              - ste,nomadik-nhk15-display52          - const: tpo,tpg11053      - const: tpo,tpg11054 55  reg:56    maxItems: 157 58  grestb-gpios:59    maxItems: 160    description: panel reset GPIO61 62  spi-3wire: true63 64  spi-max-frequency:65    const: 300000066 67required:68  - compatible69  - reg70  - grestb-gpios71  - width-mm72  - height-mm73  - spi-3wire74  - spi-max-frequency75  - port76 77unevaluatedProperties: false78 79examples:80  - |+81    spi {82      #address-cells = <1>;83      #size-cells = <0>;84 85      panel: display@0 {86        compatible = "tpo,tpg110";87        reg = <0>;88        spi-3wire;89        /* 320 ns min period ~= 3 MHz */90        spi-max-frequency = <3000000>;91        /* Width and height from data sheet */92        width-mm = <116>;93        height-mm = <87>;94        grestb-gpios = <&foo_gpio 5 1>;95        backlight = <&bl>;96 97        port {98          nomadik_clcd_panel: endpoint {99            remote-endpoint = <&foo>;100          };101        };102      };103    };104 105...106