23 lines · plain
1Sitronix ST7586 display panel2 3Required properties:4- compatible: "lego,ev3-lcd".5- a0-gpios: The A0 signal (since this binding is for serial mode, this is6 the pin labeled D1 on the controller, not the pin labeled A0)7- reset-gpios: Reset pin8 9The node for this driver must be a child node of a SPI controller, hence10all mandatory properties described in ../spi/spi-bus.txt must be specified.11 12Optional properties:13- rotation: panel rotation in degrees counter clockwise (0,90,180,270)14 15Example:16 display@0{17 compatible = "lego,ev3-lcd";18 reg = <0>;19 spi-max-frequency = <10000000>;20 a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;21 reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;22 };23