239 lines · plain
1Texas Instruments eDMA2 3The eDMA3 consists of two components: Channel controller (CC) and Transfer4Controller(s) (TC). The CC is the main entry for DMA users since it is5responsible for the DMA channel handling, while the TCs are responsible to6execute the actual DMA tansfer.7 8------------------------------------------------------------------------------9eDMA3 Channel Controller10 11Required properties:12--------------------13- compatible: Should be:14 - "ti,edma3-tpcc" for the channel controller(s) on OMAP,15 AM33xx and AM43xx SoCs.16 - "ti,k2g-edma3-tpcc", "ti,edma3-tpcc" for the17 channel controller(s) on 66AK2G.18- #dma-cells: Should be set to <2>. The first number is the DMA request19 number and the second is the TC the channel is serviced on.20- reg: Memory map of eDMA CC21- reg-names: "edma3_cc"22- interrupts: Interrupt lines for CCINT, MPERR and CCERRINT.23- interrupt-names: "edma3_ccint", "edma3_mperr" and "edma3_ccerrint"24- ti,tptcs: List of TPTCs associated with the eDMA in the following form:25 <&tptc_phandle TC_priority_number>. The highest priority is 0.26 27SoC-specific Required properties:28--------------------------------29The following are mandatory properties for OMAP, AM33xx and AM43xx SoCs only:30- ti,hwmods: Name of the hwmods associated to the eDMA CC.31 32The following are mandatory properties for 66AK2G SoCs only:33- power-domains:Should contain a phandle to a PM domain provider node34 and an args specifier containing the device id35 value. This property is as per the binding,36 Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml37 38Optional properties:39-------------------40- ti,edma-memcpy-channels: List of channels allocated to be used for memcpy, iow41 these channels will be SW triggered channels. See example.42- ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by43 the driver, they are allocated to be used by for example the44 DSP. See example.45- dma-channel-mask: Mask of usable channels.46 Single uint32 for EDMA with 32 channels, array of two uint32 for47 EDMA with 64 channels. See example and48 Documentation/devicetree/bindings/dma/dma-common.yaml49 50 51------------------------------------------------------------------------------52eDMA3 Transfer Controller53 54Required properties:55--------------------56- compatible: Should be:57 - "ti,edma3-tptc" for the transfer controller(s) on OMAP,58 AM33xx and AM43xx SoCs.59 - "ti,k2g-edma3-tptc", "ti,edma3-tptc" for the60 transfer controller(s) on 66AK2G.61- reg: Memory map of eDMA TC62- interrupts: Interrupt number for TCerrint.63 64SoC-specific Required properties:65--------------------------------66The following are mandatory properties for OMAP, AM33xx and AM43xx SoCs only:67- ti,hwmods: Name of the hwmods associated to the eDMA TC.68 69The following are mandatory properties for 66AK2G SoCs only:70- power-domains:Should contain a phandle to a PM domain provider node71 and an args specifier containing the device id72 value. This property is as per the binding,73 Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml74 75Optional properties:76-------------------77- interrupt-names: "edma3_tcerrint"78 79------------------------------------------------------------------------------80Examples:81 821.83edma: edma@49000000 {84 compatible = "ti,edma3-tpcc";85 ti,hwmods = "tpcc";86 reg = <0x49000000 0x10000>;87 reg-names = "edma3_cc";88 interrupts = <12 13 14>;89 interrupt-names = "edma3_ccint", "edma3_mperr", "edma3_ccerrint";90 dma-requests = <64>;91 #dma-cells = <2>;92 93 ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 7>, <&edma_tptc2 0>;94 95 /* Channel 20 and 21 is allocated for memcpy */96 ti,edma-memcpy-channels = <20 21>;97 /* The following PaRAM slots are reserved: 35-44 and 100-109 */98 ti,edma-reserved-slot-ranges = <35 10>, <100 10>;99 /* The following channels are reserved: 35-44 */100 dma-channel-mask = <0xffffffff /* Channel 0-31 */101 0xffffe007>; /* Channel 32-63 */102};103 104edma_tptc0: tptc@49800000 {105 compatible = "ti,edma3-tptc";106 ti,hwmods = "tptc0";107 reg = <0x49800000 0x100000>;108 interrupts = <112>;109 interrupt-names = "edm3_tcerrint";110};111 112edma_tptc1: tptc@49900000 {113 compatible = "ti,edma3-tptc";114 ti,hwmods = "tptc1";115 reg = <0x49900000 0x100000>;116 interrupts = <113>;117 interrupt-names = "edm3_tcerrint";118};119 120edma_tptc2: tptc@49a00000 {121 compatible = "ti,edma3-tptc";122 ti,hwmods = "tptc2";123 reg = <0x49a00000 0x100000>;124 interrupts = <114>;125 interrupt-names = "edm3_tcerrint";126};127 128sham: sham@53100000 {129 compatible = "ti,omap4-sham";130 ti,hwmods = "sham";131 reg = <0x53100000 0x200>;132 interrupts = <109>;133 /* DMA channel 36 executed on eDMA TC0 - low priority queue */134 dmas = <&edma 36 0>;135 dma-names = "rx";136};137 138mcasp0: mcasp@48038000 {139 compatible = "ti,am33xx-mcasp-audio";140 ti,hwmods = "mcasp0";141 reg = <0x48038000 0x2000>,142 <0x46000000 0x400000>;143 reg-names = "mpu", "dat";144 interrupts = <80>, <81>;145 interrupt-names = "tx", "rx";146 /* DMA channels 8 and 9 executed on eDMA TC2 - high priority queue */147 dmas = <&edma 8 2>,148 <&edma 9 2>;149 dma-names = "tx", "rx";150};151 1522.153edma1: edma@2728000 {154 compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";155 reg = <0x02728000 0x8000>;156 reg-names = "edma3_cc";157 interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,158 <GIC_SPI 219 IRQ_TYPE_EDGE_RISING>,159 <GIC_SPI 220 IRQ_TYPE_EDGE_RISING>;160 interrupt-names = "edma3_ccint", "emda3_mperr",161 "edma3_ccerrint";162 dma-requests = <64>;163 #dma-cells = <2>;164 165 ti,tptcs = <&edma1_tptc0 7>, <&edma1_tptc1 0>;166 167 /*168 * memcpy is disabled, can be enabled with:169 * ti,edma-memcpy-channels = <12 13 14 15>;170 * for example.171 */172 173 power-domains = <&k2g_pds 0x4f>;174};175 176edma1_tptc0: tptc@27b0000 {177 compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";178 reg = <0x027b0000 0x400>;179 power-domains = <&k2g_pds 0x4f>;180};181 182edma1_tptc1: tptc@27b8000 {183 compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";184 reg = <0x027b8000 0x400>;185 power-domains = <&k2g_pds 0x4f>;186};187 188mmc0: mmc@23000000 {189 compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc";190 reg = <0x23000000 0x400>;191 interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>;192 dmas = <&edma1 24 0>, <&edma1 25 0>;193 dma-names = "tx", "rx";194 bus-width = <4>;195 ti,needs-special-reset;196 no-1-8-v;197 max-frequency = <96000000>;198 power-domains = <&k2g_pds 0xb>;199 clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>;200 clock-names = "fck", "mmchsdb_fck";201};202 203------------------------------------------------------------------------------204DEPRECATED binding, new DTS files must use the ti,edma3-tpcc/ti,edma3-tptc205binding.206 207Required properties:208- compatible : "ti,edma3"209- #dma-cells: Should be set to <1>210 Clients should use a single channel number per DMA request.211- reg: Memory map for accessing module212- interrupts: Exactly 3 interrupts need to be specified in the order:213 1. Transfer completion interrupt.214 2. Memory protection interrupt.215 3. Error interrupt.216Optional properties:217- ti,hwmods: Name of the hwmods associated to the EDMA218- ti,edma-xbar-event-map: Crossbar event to channel map219 220Deprecated properties:221Listed here in case one wants to boot an old kernel with new DTB. These222properties might need to be added to the new DTS files.223- ti,edma-regions: Number of regions224- ti,edma-slots: Number of slots225- dma-channels: Specify total DMA channels per CC226 227Example:228 229edma: edma@49000000 {230 reg = <0x49000000 0x10000>;231 interrupt-parent = <&intc>;232 interrupts = <12 13 14>;233 compatible = "ti,edma3";234 ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";235 #dma-cells = <1>;236 ti,edma-xbar-event-map = /bits/ 16 <1 12237 2 13>;238};239