74 lines · yaml
1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause2%YAML 1.23---4$id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml#5$schema: http://devicetree.org/meta-schemas/core.yaml#6 7title: PTN5150 CC (Configuration Channel) Logic device8 9maintainers:10 - Krzysztof Kozlowski <krzk@kernel.org>11 12description: |13 PTN5150 is a small thin low power CC logic chip supporting the USB Type-C14 connector application with CC control logic detection and indication15 functions. It is interfaced to the host controller using an I2C interface.16 17properties:18 compatible:19 const: nxp,ptn515020 21 int-gpios:22 maxItems: 123 deprecated: true24 description:25 GPIO pin (input) connected to the PTN5150's INTB pin.26 Use "interrupts" instead.27 28 interrupts:29 maxItems: 130 31 reg:32 maxItems: 133 34 vbus-gpios:35 maxItems: 136 description:37 GPIO pin (output) used to control VBUS. If skipped, no such control38 takes place.39 40 port:41 $ref: /schemas/graph.yaml#/properties/port42 description:43 A port node to link the usb controller for the dual role switch.44 45required:46 - compatible47 - interrupts48 - reg49 50additionalProperties: false51 52examples:53 - |54 #include <dt-bindings/gpio/gpio.h>55 #include <dt-bindings/interrupt-controller/irq.h>56 i2c {57 #address-cells = <1>;58 #size-cells = <0>;59 60 ptn5150@1d {61 compatible = "nxp,ptn5150";62 reg = <0x1d>;63 interrupt-parent = <&msmgpio>;64 interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;65 vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>;66 67 port {68 endpoint {69 remote-endpoint = <&usb1_drd_sw>;70 };71 };72 };73 };74