104 lines · yaml
1# SPDX-License-Identifier: GPL-2.0-only2%YAML 1.23---4$id: http://devicetree.org/schemas/i2c/i2c-mux-pinctrl.yaml#5$schema: http://devicetree.org/meta-schemas/core.yaml#6 7title: Pinctrl-based I2C Bus Mux8 9maintainers:10 - Wolfram Sang <wsa@kernel.org>11 12description: |13 This binding describes an I2C bus multiplexer that uses pin multiplexing to route the I2C14 signals, and represents the pin multiplexing configuration using the pinctrl device tree15 bindings.16 17 +-----+ +-----+18 | dev | | dev |19 +------------------------+ +-----+ +-----+20 | SoC | | |21 | /----|------+--------+22 | +---+ +------+ | child bus A, on first set of pins23 | |I2C|---|Pinmux| |24 | +---+ +------+ | child bus B, on second set of pins25 | \----|------+--------+--------+26 | | | | |27 +------------------------+ +-----+ +-----+ +-----+28 | dev | | dev | | dev |29 +-----+ +-----+ +-----+30 31 For each named state defined in the pinctrl-names property, an I2C child bus will be created.32 I2C child bus numbers are assigned based on the index into the pinctrl-names property.33 34 The only exception is that no bus will be created for a state named "idle". If such a state is35 defined, it must be the last entry in pinctrl-names. For example:36 37 pinctrl-names = "ddc", "pta", "idle" -> ddc = bus 0, pta = bus 138 pinctrl-names = "ddc", "idle", "pta" -> Invalid ("idle" not last)39 pinctrl-names = "idle", "ddc", "pta" -> Invalid ("idle" not last)40 41 Whenever an access is made to a device on a child bus, the relevant pinctrl state will be42 programmed into hardware.43 44 If an idle state is defined, whenever an access is not being made to a device on a child bus,45 the idle pinctrl state will be programmed into hardware.46 47 If an idle state is not defined, the most recently used pinctrl state will be left programmed48 into hardware whenever no access is being made of a device on a child bus.49 50properties:51 compatible:52 const: i2c-mux-pinctrl53 54 i2c-parent:55 $ref: /schemas/types.yaml#/definitions/phandle56 description: The phandle of the I2C bus that this multiplexer's master-side port is connected57 to.58 59allOf:60 - $ref: i2c-mux.yaml61 62unevaluatedProperties: false63 64required:65 - compatible66 - i2c-parent67 68examples:69 - |70 i2cmux {71 compatible = "i2c-mux-pinctrl";72 #address-cells = <1>;73 #size-cells = <0>;74 75 i2c-parent = <&i2c1>;76 77 pinctrl-names = "ddc", "pta", "idle";78 pinctrl-0 = <&state_i2cmux_ddc>;79 pinctrl-1 = <&state_i2cmux_pta>;80 pinctrl-2 = <&state_i2cmux_idle>;81 82 i2c@0 {83 reg = <0>;84 #address-cells = <1>;85 #size-cells = <0>;86 87 eeprom@50 {88 compatible = "atmel,24c02";89 reg = <0x50>;90 };91 };92 93 i2c@1 {94 reg = <1>;95 #address-cells = <1>;96 #size-cells = <0>;97 98 eeprom@50 {99 compatible = "atmel,24c02";100 reg = <0x50>;101 };102 };103 };104