brintos

brintos / linux-shallow public Read only

0
0
Text · 5.2 KiB · 89977b9 Raw
146 lines · yaml
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)2%YAML 1.23---4$id: http://devicetree.org/schemas/iio/pressure/honeywell,hsc030pa.yaml#5$schema: http://devicetree.org/meta-schemas/core.yaml#6 7title: Honeywell TruStability HSC and SSC pressure sensor series8 9description: |10  support for Honeywell TruStability HSC and SSC digital pressure sensor11  series.12 13  These sensors have either an I2C, an SPI or an analog interface. Only the14  digital versions are supported by this driver.15 16  There are 118 models with different pressure ranges available in each family.17  The vendor calls them "HSC series" and "SSC series". All of them have an18  identical programming model but differ in pressure range, unit and transfer19  function.20 21  To support different models one needs to specify the pressure range as well22  as the transfer function. Pressure range can either be provided via23  pressure-triplet (directly extracted from the part number) or in case it's24  a custom chip via numerical range limits converted to pascals.25 26  The transfer function defines the ranges of raw conversion values delivered27  by the sensor. pmin-pascal and pmax-pascal corespond to the minimum and28  maximum pressure that can be measured.29 30  Please note that in case of an SPI-based sensor, the clock signal should not31  exceed 800kHz and the MOSI signal is not required.32 33  Specifications about the devices can be found at:34  https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf35  https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-ssc-series/documents/sps-siot-trustability-ssc-series-standard-accuracy-board-mount-pressure-sensors-50099533-a-en-ciid-151134.pdf36 37maintainers:38  - Petre Rodan <petre.rodan@subdimension.ro>39 40properties:41  compatible:42    const: honeywell,hsc030pa43 44  reg:45    maxItems: 146 47  honeywell,transfer-function:48    description: |49      Transfer function which defines the range of valid values delivered by50      the sensor.51      0 - A, 10% to 90% of 2^1452      1 - B, 5% to 95% of 2^1453      2 - C, 5% to 85% of 2^1454      3 - F, 4% to 94% of 2^1455    enum: [0, 1, 2, 3]56    $ref: /schemas/types.yaml#/definitions/uint3257 58  honeywell,pressure-triplet:59    description: |60      Case-sensitive five character string that defines pressure range, unit61      and type as part of the device nomenclature. In the unlikely case of a62      custom chip, set to "NA" and provide pmin-pascal and pmax-pascal.63    enum: [001BA, 1.6BA, 2.5BA, 004BA, 006BA, 010BA, 1.6MD, 2.5MD, 004MD,64           006MD, 010MD, 016MD, 025MD, 040MD, 060MD, 100MD, 160MD, 250MD,65           400MD, 600MD, 001BD, 1.6BD, 2.5BD, 004BD, 2.5MG, 004MG, 006MG,66           010MG, 016MG, 025MG, 040MG, 060MG, 100MG, 160MG, 250MG, 400MG,67           600MG, 001BG, 1.6BG, 2.5BG, 004BG, 006BG, 010BG, 100KA, 160KA,68           250KA, 400KA, 600KA, 001GA, 160LD, 250LD, 400LD, 600LD, 001KD,69           1.6KD, 2.5KD, 004KD, 006KD, 010KD, 016KD, 025KD, 040KD, 060KD,70           100KD, 160KD, 250KD, 400KD, 250LG, 400LG, 600LG, 001KG, 1.6KG,71           2.5KG, 004KG, 006KG, 010KG, 016KG, 025KG, 040KG, 060KG, 100KG,72           160KG, 250KG, 400KG, 600KG, 001GG, 015PA, 030PA, 060PA, 100PA,73           150PA, 0.5ND, 001ND, 002ND, 004ND, 005ND, 010ND, 020ND, 030ND,74           001PD, 005PD, 015PD, 030PD, 060PD, 001NG, 002NG, 004NG, 005NG,75           010NG, 020NG, 030NG, 001PG, 005PG, 015PG, 030PG, 060PG, 100PG,76           150PG, NA]77    $ref: /schemas/types.yaml#/definitions/string78 79  honeywell,pmin-pascal:80    description: |81      Minimum pressure value the sensor can measure in pascal.82      To be specified only if honeywell,pressure-triplet is set to "NA".83 84  honeywell,pmax-pascal:85    description: |86      Maximum pressure value the sensor can measure in pascal.87      To be specified only if honeywell,pressure-triplet is set to "NA".88 89  vdd-supply:90    description:91      Provide VDD power to the sensor (either 3.3V or 5V depending on the chip)92 93  spi-max-frequency:94    maximum: 80000095 96required:97  - compatible98  - reg99  - honeywell,transfer-function100  - honeywell,pressure-triplet101 102allOf:103  - $ref: /schemas/spi/spi-peripheral-props.yaml104 105additionalProperties: false106 107dependentSchemas:108  honeywell,pmin-pascal:109    properties:110      honeywell,pressure-triplet:111        const: NA112  honeywell,pmax-pascal:113    properties:114      honeywell,pressure-triplet:115        const: NA116 117examples:118  - |119    i2c {120        #address-cells = <1>;121        #size-cells = <0>;122 123        pressure@28 {124            compatible = "honeywell,hsc030pa";125            reg = <0x28>;126            honeywell,transfer-function = <0>;127            honeywell,pressure-triplet = "030PA";128        };129    };130  - |131    spi {132        #address-cells = <1>;133        #size-cells = <0>;134 135        pressure@0 {136            compatible = "honeywell,hsc030pa";137            reg = <0>;138            spi-max-frequency = <800000>;139            honeywell,transfer-function = <0>;140            honeywell,pressure-triplet = "NA";141            honeywell,pmin-pascal = <0>;142            honeywell,pmax-pascal = <200000>;143        };144    };145...146