brintos

brintos / linux-shallow public Read only

0
0
Text · 2.1 KiB · 358cb82 Raw
90 lines · yaml
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)2%YAML 1.23---4$id: http://devicetree.org/schemas/input/goodix,gt7375p.yaml#5$schema: http://devicetree.org/meta-schemas/core.yaml#6 7title: Goodix GT7375P touchscreen8 9maintainers:10  - Douglas Anderson <dianders@chromium.org>11 12description:13  Supports the Goodix GT7375P touchscreen.14  This touchscreen uses the i2c-hid protocol but has some non-standard15  power sequencing required.16 17allOf:18  - $ref: /schemas/input/touchscreen/touchscreen.yaml#19 20properties:21  compatible:22    oneOf:23      - const: goodix,gt7375p24      - items:25          - const: goodix,gt7986u26          - const: goodix,gt7375p27 28  reg:29    enum:30      - 0x5d31      - 0x1432 33  interrupts:34    maxItems: 135 36  panel: true37 38  reset-gpios:39    true40 41  vdd-supply:42    description: The 3.3V supply to the touchscreen.43 44  mainboard-vddio-supply:45    description:46      The supply on the main board needed to power up IO signals going47      to the touchscreen. This supply need not go to the touchscreen48      itself as long as it allows the main board to make signals compatible49      with what the touchscreen is expecting for its IO rails.50 51  goodix,no-reset-during-suspend:52    description:53      Set this to true to enforce the driver to not assert the reset GPIO54      during suspend.55      Due to potential touchscreen hardware flaw, back-powering could happen in56      suspend if the power supply is on and with active-low reset GPIO asserted.57      This property is used to avoid the back-powering issue.58    type: boolean59 60required:61  - compatible62  - reg63  - interrupts64  - reset-gpios65  - vdd-supply66 67additionalProperties: false68 69examples:70  - |71    #include <dt-bindings/clock/qcom,rpmh.h>72    #include <dt-bindings/gpio/gpio.h>73    #include <dt-bindings/interrupt-controller/irq.h>74 75    i2c {76      #address-cells = <1>;77      #size-cells = <0>;78 79      ap_ts: touchscreen@5d {80        compatible = "goodix,gt7375p";81        reg = <0x5d>;82 83        interrupt-parent = <&tlmm>;84        interrupts = <9 IRQ_TYPE_LEVEL_LOW>;85 86        reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;87        vdd-supply = <&pp3300_ts>;88      };89    };90