brintos

brintos / linux-shallow public Read only

0
0
Text · 2.1 KiB · e0983e4 Raw
54 lines · yaml
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)2%YAML 1.23---4$id: http://devicetree.org/schemas/leds/backlight/common.yaml#5$schema: http://devicetree.org/meta-schemas/core.yaml#6 7title: Common backlight properties8 9maintainers:10  - Lee Jones <lee@kernel.org>11  - Daniel Thompson <daniel.thompson@linaro.org>12  - Jingoo Han <jingoohan1@gmail.com>13 14description:15  Backlight devices provide backlight for different types of graphical16  displays. They are typically but not necessarily implemented using a white17  LED powered by a boost converter.18 19properties:20  default-brightness:21    description:22      The default brightness that should be applied to the LED by the operating23      system on start-up. The brightness should not exceed the brightness the24      LED can provide.25    $ref: /schemas/types.yaml#/definitions/uint3226 27  max-brightness:28    description:29      Normally the maximum brightness is determined by the hardware and this30      property is not required. This property is used to put a software limit31      on the brightness apart from what the driver says, as it could happen32      that a LED can be made so bright that it gets damaged or causes damage33      due to restrictions in a specific system, such as mounting conditions.34    $ref: /schemas/types.yaml#/definitions/uint3235 36  brightness-levels:37    description:38      Array of distinct brightness levels. The levels must be in the range39      accepted by the underlying LED device. Typically these are in the range40      from 0 to 255, but any range starting at 0 will do, as long as they are41      accepted by the LED.42      The 0 value means a 0% of brightness (darkest/off), while the last value43      in the array represents a full 100% brightness (brightest).44      If this array is not provided, the driver default mapping is used.45    $ref: /schemas/types.yaml#/definitions/uint32-array46 47  default-brightness-level:48    description:49      The default brightness level (index into the array defined by the50      "brightness-levels" property).51    $ref: /schemas/types.yaml#/definitions/uint3252 53additionalProperties: true54