82 lines · yaml
1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause2%YAML 1.23---4$id: http://devicetree.org/schemas/leds/rohm,bd2606mvv.yaml#5$schema: http://devicetree.org/meta-schemas/core.yaml#6 7title: ROHM BD2606MVV LED controller8 9maintainers:10 - Andreas Kemnade <andreas@kemnade.info>11 12description:13 The BD2606 MVV is a programmable LED controller connected via I2C that can14 drive 6 separate lines. Each of them can be individually switched on and off,15 but the brightness setting is shared between pairs of them.16 17 Datasheet is available at18 https://fscdn.rohm.com/en/products/databook/datasheet/ic/power/led_driver/bd2606mvv_1-e.pdf19 20properties:21 compatible:22 const: rohm,bd2606mvv23 24 reg:25 maxItems: 126 27 "#address-cells":28 const: 129 30 "#size-cells":31 const: 032 33 enable-gpios:34 maxItems: 135 description: GPIO pin to enable/disable the device.36 37patternProperties:38 "^led@[0-5]$":39 type: object40 $ref: common.yaml#41 unevaluatedProperties: false42 43 properties:44 reg:45 minimum: 046 maximum: 547 48 required:49 - reg50 51additionalProperties: false52 53examples:54 - |55 #include <dt-bindings/leds/common.h>56 57 i2c {58 #address-cells = <1>;59 #size-cells = <0>;60 61 led-controller@66 {62 compatible = "rohm,bd2606mvv";63 reg = <0x66>;64 #address-cells = <1>;65 #size-cells = <0>;66 67 led@0 {68 reg = <0x0>;69 color = <LED_COLOR_ID_RED>;70 function = LED_FUNCTION_POWER;71 };72 73 led@2 {74 reg = <0x2>;75 color = <LED_COLOR_ID_WHITE>;76 function = LED_FUNCTION_STATUS;77 };78 };79 };80 81...82