39 lines · plain
1* Analog Devices ADP1653 flash LED driver2 3Required Properties:4 5 - compatible: Must contain "adi,adp1653"6 7 - reg: I2C slave address8 9 - enable-gpios: Specifier of the GPIO connected to EN pin10 11There are two LED outputs available - flash and indicator. One LED is12represented by one child node, nodes need to be named "flash" and "indicator".13 14Required properties of the LED child node:15- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt16 17Required properties of the flash LED child node:18 19- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt20- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt21- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt22 23Example:24 25 adp1653: led-controller@30 {26 compatible = "adi,adp1653";27 reg = <0x30>;28 enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */29 30 flash {31 flash-timeout-us = <500000>;32 flash-max-microamp = <320000>;33 led-max-microamp = <50000>;34 };35 indicator {36 led-max-microamp = <17500>;37 };38 };39