76 lines · yaml
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)2%YAML 1.23---4$id: http://devicetree.org/schemas/media/i2c/aptina,mt9v111.yaml#5$schema: http://devicetree.org/meta-schemas/core.yaml#6 7title: Aptina MT9V111 CMOS sensor8 9maintainers:10 - Jacopo Mondi <jacopo@jmondi.org>11 12description: |13 The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core14 based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP).15 16 The sensor has an active pixel array of 640x480 pixels and can output a number17 of image resolutions and formats controllable through a simple two-wires18 interface.19 20properties:21 compatible:22 const: aptina,mt9v11123 24 reg:25 maxItems: 126 27 clocks:28 maxItems: 129 30 enable-gpios:31 description: Enable signal, pin name "OE#". Active low.32 maxItems: 133 34 standby-gpios:35 description: |36 Low power state control signal, pin name "STANDBY". Active high.37 maxItems: 138 39 reset-gpios:40 description: Chip reset signal, pin name "RESET#". Active low.41 maxItems: 142 43 port:44 $ref: /schemas/graph.yaml#/properties/port45 description: |46 Output video port.47 48required:49 - compatible50 - reg51 - clocks52 - port53 54additionalProperties: false55 56examples:57 - |58 i2c {59 #address-cells = <1>;60 #size-cells = <0>;61 62 camera@48 {63 compatible = "aptina,mt9v111";64 reg = <0x48>;65 clocks = <&camera_clk>;66 67 port {68 mt9v111_out: endpoint {69 remote-endpoint = <&ceu_in>;70 };71 };72 };73 };74 75...76