39 lines · plain
1MT9M001: 1/2-Inch Megapixel Digital Image Sensor2 3The MT9M001 is an SXGA-format with a 1/2-inch CMOS active-pixel digital4image sensor. It is programmable through I2C interface.5 6Required Properties:7 8- compatible: shall be "onnn,mt9m001".9- clocks: reference to the master clock into sensor10 11Optional Properties:12 13- reset-gpios: GPIO handle which is connected to the reset pin of the chip.14 Active low.15- standby-gpios: GPIO handle which is connected to the standby pin of the chip.16 Active high.17 18The device node must contain one 'port' child node with one 'endpoint' child19sub-node for its digital output video port, in accordance with the video20interface bindings defined in:21Documentation/devicetree/bindings/media/video-interfaces.txt22 23Example:24 25 &i2c1 {26 camera-sensor@5d {27 compatible = "onnn,mt9m001";28 reg = <0x5d>;29 reset-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;30 standby-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;31 clocks = <&camera_clk>;32 port {33 mt9m001_out: endpoint {34 remote-endpoint = <&vcap_in>;35 };36 };37 };38 };39