113 lines · yaml
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)2%YAML 1.23---4$id: http://devicetree.org/schemas/media/i2c/ovti,ov2680.yaml#5$schema: http://devicetree.org/meta-schemas/core.yaml#6 7title: Omnivision OV2680 CMOS Sensor8 9maintainers:10 - Rui Miguel Silva <rmfrfs@gmail.com>11 12description: |-13 The OV2680 color sensor is a low voltage, high performance 1/5 inch UXGA (214 megapixel) CMOS image sensor that provides a single-chip UXGA (1600 x 1200)15 camera. It provides full-frame, sub-sampled, or windowed 10-bit images in16 various formats via the control of the Serial Camera Control Bus (SCCB)17 interface. The OV2680 has an image array capable of operating at up to 3018 frames per second (fps) in UXGA resolution.19 20properties:21 compatible:22 const: ovti,ov268023 24 reg:25 maxItems: 126 27 clocks:28 maxItems: 129 30 clock-names:31 const: xvclk32 33 reset-gpios:34 description:35 The phandle and specifier for the GPIO that controls sensor reset.36 This corresponds to the hardware pin XSHUTDOWN which is physically37 active low.38 maxItems: 139 40 DOVDD-supply:41 description:42 Definition of the regulator used as interface power supply.43 44 AVDD-supply:45 description:46 Definition of the regulator used as analog power supply.47 48 DVDD-supply:49 description:50 Definition of the regulator used as digital power supply.51 52 port:53 description:54 A node containing an output port node.55 $ref: /schemas/graph.yaml#/$defs/port-base56 additionalProperties: false57 58 properties:59 endpoint:60 $ref: /schemas/media/video-interfaces.yaml#61 additionalProperties: false62 63 properties:64 link-frequencies: true65 66 remote-endpoint: true67 68 required:69 - link-frequencies70 71required:72 - compatible73 - reg74 - clocks75 - clock-names76 - DOVDD-supply77 - AVDD-supply78 - DVDD-supply79 - reset-gpios80 - port81 82additionalProperties: false83 84examples:85 - |86 #include <dt-bindings/gpio/gpio.h>87 88 i2c {89 #address-cells = <1>;90 #size-cells = <0>;91 92 ov2680: camera-sensor@36 {93 compatible = "ovti,ov2680";94 reg = <0x36>;95 clocks = <&osc>;96 clock-names = "xvclk";97 reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;98 99 DOVDD-supply = <&sw2_reg>;100 DVDD-supply = <&sw2_reg>;101 AVDD-supply = <®_peri_3p15v>;102 103 port {104 ov2680_to_mipi: endpoint {105 remote-endpoint = <&mipi_from_sensor>;106 link-frequencies = /bits/ 64 <330000000>;107 };108 };109 };110 };111 112...113