43 lines · plain
1Marvell PXA camera host interface2 3Required properties:4 - compatible: Should be "marvell,pxa270-qci"5 - reg: register base and size6 - interrupts: the interrupt number7 - any required generic properties defined in video-interfaces.txt8 9Optional properties:10 - clocks: input clock (see clock-bindings.txt)11 - clock-output-names: should contain the name of the clock driving the12 sensor master clock MCLK13 - clock-frequency: host interface is driving MCLK, and MCLK rate is this rate14 15Example:16 17 pxa_camera: pxa_camera@50000000 {18 compatible = "marvell,pxa270-qci";19 reg = <0x50000000 0x1000>;20 interrupts = <33>;21 22 clocks = <&pxa2xx_clks 24>;23 clock-names = "ciclk";24 clock-frequency = <50000000>;25 clock-output-names = "qci_mclk";26 27 28 port {29 #address-cells = <1>;30 #size-cells = <0>;31 32 /* Parallel bus endpoint */33 qci: endpoint@0 {34 reg = <0>; /* Local endpoint # */35 remote-endpoint = <&mt9m111_1>;36 bus-width = <8>; /* Used data lines */37 hsync-active = <0>; /* Active low */38 vsync-active = <0>; /* Active low */39 pclk-sample = <1>; /* Rising */40 };41 };42 };43