brintos

brintos / linux-shallow public Read only

0
0
Text · 2.3 KiB · f762fdc Raw
101 lines · yaml
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)2%YAML 1.23---4$id: http://devicetree.org/schemas/media/ti,j721e-csi2rx-shim.yaml#5$schema: http://devicetree.org/meta-schemas/core.yaml#6 7title: TI J721E CSI2RX Shim8 9description: |10  The TI J721E CSI2RX Shim is a wrapper around Cadence CSI2RX bridge that11  enables sending captured frames to memory over PSI-L DMA. In the J721E12  Technical Reference Manual (SPRUIL1B) it is referred to as "SHIM" under the13  CSI_RX_IF section.14 15maintainers:16  - Jai Luthra <j-luthra@ti.com>17 18properties:19  compatible:20    const: ti,j721e-csi2rx-shim21 22  dmas:23    maxItems: 124 25  dma-names:26    items:27      - const: rx028 29  reg:30    maxItems: 131 32  power-domains:33    maxItems: 134 35  ranges: true36 37  "#address-cells": true38 39  "#size-cells": true40 41patternProperties:42  "^csi-bridge@":43    type: object44    description: CSI2 bridge node.45    $ref: cdns,csi2rx.yaml#46 47required:48  - compatible49  - reg50  - dmas51  - dma-names52  - power-domains53  - ranges54  - "#address-cells"55  - "#size-cells"56 57additionalProperties: false58 59examples:60  - |61    #include <dt-bindings/soc/ti,sci_pm_domain.h>62 63    ti_csi2rx0: ticsi2rx@4500000 {64        compatible = "ti,j721e-csi2rx-shim";65        dmas = <&main_udmap 0x4940>;66        dma-names = "rx0";67        reg = <0x4500000 0x1000>;68        power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>;69        #address-cells = <1>;70        #size-cells = <1>;71        ranges;72 73        cdns_csi2rx: csi-bridge@4504000 {74            compatible = "ti,j721e-csi2rx", "cdns,csi2rx";75            reg = <0x4504000 0x1000>;76            clocks = <&k3_clks 26 2>, <&k3_clks 26 0>, <&k3_clks 26 2>,77              <&k3_clks 26 2>, <&k3_clks 26 3>, <&k3_clks 26 3>;78            clock-names = "sys_clk", "p_clk", "pixel_if0_clk",79              "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";80            phys = <&dphy0>;81            phy-names = "dphy";82 83            ports {84                #address-cells = <1>;85                #size-cells = <0>;86 87                csi2_0: port@0 {88 89                    reg = <0>;90 91                    csi2rx0_in_sensor: endpoint {92                        remote-endpoint = <&csi2_cam0>;93                        bus-type = <4>; /* CSI2 DPHY. */94                        clock-lanes = <0>;95                        data-lanes = <1 2>;96                    };97                };98            };99        };100    };101