brintos

brintos / linux-shallow public Read only

0
0
Text · 3.1 KiB · d1c3421 Raw
114 lines · yaml
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)2%YAML 1.23---4$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,ifc.yaml#5$schema: http://devicetree.org/meta-schemas/core.yaml#6 7title: FSL/NXP Integrated Flash Controller8 9maintainers:10  - Shawn Guo <shawnguo@kernel.org>11 12description: |13  NXP's integrated flash controller (IFC) is an advanced version of the14  enhanced local bus controller which includes similar programming and signal15  interfaces with an extended feature set. The IFC provides access to multiple16  external memory types, such as NAND flash (SLC and MLC), NOR flash, EPROM,17  SRAM and other memories where address and data are shared on a bus.18 19properties:20  $nodename:21    pattern: "^memory-controller@[0-9a-f]+$"22 23  compatible:24    const: fsl,ifc25 26  "#address-cells":27    enum: [2, 3]28    description: |29      Should be either two or three.  The first cell is the chipselect30      number, and the remaining cells are the offset into the chipselect.31 32  "#size-cells":33    enum: [1, 2]34    description: |35      Either one or two, depending on how large each chipselect can be.36 37  reg:38    maxItems: 139 40  interrupts:41    minItems: 142    maxItems: 243    description: |44      IFC may have one or two interrupts.  If two interrupt specifiers are45      present, the first is the "common" interrupt (CM_EVTER_STAT), and the46      second is the NAND interrupt (NAND_EVTER_STAT).  If there is only one,47      that interrupt reports both types of event.48 49  little-endian:50    type: boolean51    description: |52      If this property is absent, the big-endian mode will be in use as default53      for registers.54 55  ranges:56    description: |57      Each range corresponds to a single chipselect, and covers the entire58      access window as configured.59 60patternProperties:61  "^.*@[a-f0-9]+(,[a-f0-9]+)+$":62    type: object63    description: |64      Child device nodes describe the devices connected to IFC such as NOR (e.g.65      cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices66      like FPGAs, CPLDs, etc.67 68    required:69      - compatible70      - reg71 72required:73  - compatible74  - reg75  - interrupts76 77additionalProperties: false78 79examples:80  - |81    soc {82        #address-cells = <2>;83        #size-cells = <2>;84 85        memory-controller@ffe1e000 {86            compatible = "fsl,ifc";87            #address-cells = <2>;88            #size-cells = <1>;89            reg = <0x0 0xffe1e000 0 0x2000>;90            interrupts = <16 2 19 2>;91            little-endian;92 93            /* NOR, NAND Flashes and CPLD on board */94            ranges = <0x0 0x0 0x0 0xee000000 0x02000000>,95                     <0x1 0x0 0x0 0xffa00000 0x00010000>,96                     <0x3 0x0 0x0 0xffb00000 0x00020000>;97 98            flash@0,0 {99                #address-cells = <1>;100                #size-cells = <1>;101                compatible = "cfi-flash";102                reg = <0x0 0x0 0x2000000>;103                bank-width = <2>;104                device-width = <1>;105 106                partition@0 {107                    /* 32MB for user data */108                    reg = <0x0 0x02000000>;109                    label = "NOR Data";110                };111            };112        };113    };114