40 lines · plain
1-------------------------------2BCM590xx Power Management Units3-------------------------------4 5Required properties:6- compatible: "brcm,bcm59056"7- reg: I2C slave address8- interrupts: interrupt for the PMU. Generic interrupt client node bindings9 are described in interrupt-controller/interrupts.txt10 11------------------12Voltage Regulators13------------------14 15Optional child nodes:16- regulators: container node for regulators following the generic17 regulator binding in regulator/regulator.txt18 19 The valid regulator node names for BCM59056 are:20 rfldo, camldo1, camldo2, simldo1, simldo2, sdldo, sdxldo,21 mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo,22 csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr,23 gpldo1, gpldo2, gpldo3, gpldo4, gpldo5, gpldo6,24 vbus25 26Example:27 pmu: bcm59056@8 {28 compatible = "brcm,bcm59056";29 reg = <0x08>;30 interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;31 regulators {32 rfldo_reg: rfldo {33 regulator-min-microvolt = <1200000>;34 regulator-max-microvolt = <3300000>;35 };36 37 ...38 };39 };40