50 lines · plain
1* TPS65912 Power Management Integrated Circuit bindings2 3Required properties:4 - compatible : Should be "ti,tps65912".5 - reg : Slave address or chip select number (I2C / SPI).6 - interrupts : The interrupt line the device is connected to.7 - interrupt-controller : Marks the device node as an interrupt controller.8 - #interrupt-cells : The number of cells to describe an IRQ, should be 2.9 The first cell is the IRQ number.10 The second cell is the flags, encoded as trigger11 masks from ../interrupt-controller/interrupts.txt.12 - gpio-controller : Marks the device node as a GPIO Controller.13 - #gpio-cells : Should be two. The first cell is the pin number and14 the second cell is used to specify flags.15 See ../gpio/gpio.txt for more information.16 - regulators: : List of child nodes that specify the regulator17 initialization data. Child nodes must be named18 after their hardware counterparts: dcdc[1-4] and19 ldo[1-10]. Each child nodes is defined using the20 standard binding for regulators.21 22Example:23 24 pmic: tps65912@2d {25 compatible = "ti,tps65912";26 reg = <0x2d>;27 interrupt-parent = <&gpio1>;28 interrupts = <28 IRQ_TYPE_LEVEL_LOW>;29 interrupt-controller;30 #interrupt-cells = <2>;31 gpio-controller;32 #gpio-cells = <2>;33 34 regulators {35 dcdc1 {36 regulator-name = "vdd_core";37 regulator-min-microvolt = <912000>;38 regulator-max-microvolt = <1144000>;39 regulator-boot-on;40 regulator-always-on;41 };42 43 ldo1 {44 regulator-name = "ldo1";45 regulator-min-microvolt = <1900000>;46 regulator-max-microvolt = <1900000>;47 };48 };49 };50