31 lines · plain
1* SOCIONEXT Milbeaut SDHCI controller2 3This file documents differences between the core properties in mmc.txt4and the properties used by the sdhci_milbeaut driver.5 6Required properties:7- compatible: "socionext,milbeaut-m10v-sdhci-3.0"8- clocks: Must contain an entry for each entry in clock-names. It is a9 list of phandles and clock-specifier pairs.10 See ../clocks/clock-bindings.txt for details.11- clock-names: Should contain the following two entries:12 "iface" - clock used for sdhci interface13 "core" - core clock for sdhci controller14 15Optional properties:16- fujitsu,cmd-dat-delay-select: boolean property indicating that this host17 requires the CMD_DAT_DELAY control to be enabled.18 19Example:20 sdhci3: mmc@1b010000 {21 compatible = "socionext,milbeaut-m10v-sdhci-3.0";22 reg = <0x1b010000 0x10000>;23 interrupts = <0 265 0x4>;24 voltage-ranges = <3300 3300>;25 bus-width = <4>;26 clocks = <&clk 7>, <&ahb_clk>;27 clock-names = "core", "iface";28 cap-sdio-irq;29 fujitsu,cmd-dat-delay-select;30 };31