39 lines · plain
1* Marvell PXA168 Ethernet Controller2 3Required properties:4- compatible: should be "marvell,pxa168-eth".5- reg: address and length of the register set for the device.6- interrupts: interrupt for the device.7- clocks: pointer to the clock for the device.8 9Optional properties:10- port-id: Ethernet port number. Should be '0','1' or '2'.11- #address-cells: must be 1 when using sub-nodes.12- #size-cells: must be 0 when using sub-nodes.13- phy-handle: see ethernet.txt file in the same directory.14 15The MAC address will be determined using the optional properties16defined in ethernet.txt.17 18Sub-nodes:19Each PHY can be represented as a sub-node. This is not mandatory.20 21Sub-nodes required properties:22- reg: the MDIO address of the PHY.23 24Example:25 26 eth0: ethernet@f7b90000 {27 compatible = "marvell,pxa168-eth";28 reg = <0xf7b90000 0x10000>;29 clocks = <&chip CLKID_GETH0>;30 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;31 #address-cells = <1>;32 #size-cells = <0>;33 phy-handle = <ðphy0>;34 35 ethphy0: ethernet-phy@0 {36 reg = <0>;37 };38 };39