brintos

brintos / linux-shallow public Read only

0
0
Text · 2.0 KiB · 104953e Raw
72 lines · plain
1Device tree bindings for HiSilicon INNO USB2 PHY2 3Required properties:4- compatible: Should be one of the following strings:5	"hisilicon,inno-usb2-phy",6	"hisilicon,hi3798cv200-usb2-phy".7- reg: Should be the address space for PHY configuration register in peripheral8  controller, e.g. PERI_USB0 for USB 2.0 PHY01 on Hi3798CV200 SoC.9- clocks: The phandle and clock specifier pair for INNO USB2 PHY device10  reference clock.11- resets: The phandle and reset specifier pair for INNO USB2 PHY device reset12  signal.13- #address-cells: Must be 1.14- #size-cells: Must be 0.15 16The INNO USB2 PHY device should be a child node of peripheral controller that17contains the PHY configuration register, and each device supports up to 2 PHY18ports which are represented as child nodes of INNO USB2 PHY device.19 20Required properties for PHY port node:21- reg: The PHY port instance number.22- #phy-cells: Defined by generic PHY bindings.  Must be 0.23- resets: The phandle and reset specifier pair for PHY port reset signal.24 25Refer to phy/phy-bindings.txt for the generic PHY binding properties26 27Example:28 29perictrl: peripheral-controller@8a20000 {30	compatible = "hisilicon,hi3798cv200-perictrl", "simple-mfd";31	reg = <0x8a20000 0x1000>;32	#address-cells = <1>;33	#size-cells = <1>;34	ranges = <0x0 0x8a20000 0x1000>;35 36	usb2_phy1: usb2-phy@120 {37		compatible = "hisilicon,hi3798cv200-usb2-phy";38		reg = <0x120 0x4>;39		clocks = <&crg HISTB_USB2_PHY1_REF_CLK>;40		resets = <&crg 0xbc 4>;41		#address-cells = <1>;42		#size-cells = <0>;43 44		usb2_phy1_port0: phy@0 {45			reg = <0>;46			#phy-cells = <0>;47			resets = <&crg 0xbc 8>;48		};49 50		usb2_phy1_port1: phy@1 {51			reg = <1>;52			#phy-cells = <0>;53			resets = <&crg 0xbc 9>;54		};55	};56 57	usb2_phy2: usb2-phy@124 {58		compatible = "hisilicon,hi3798cv200-usb2-phy";59		reg = <0x124 0x4>;60		clocks = <&crg HISTB_USB2_PHY2_REF_CLK>;61		resets = <&crg 0xbc 6>;62		#address-cells = <1>;63		#size-cells = <0>;64 65		usb2_phy2_port0: phy@0 {66			reg = <0>;67			#phy-cells = <0>;68			resets = <&crg 0xbc 10>;69		};70	};71};72