37 lines · plain
1* Freescale i.MX6 SoloX IOMUX Controller2 3Please refer to fsl,imx-pinctrl.txt in this directory for common binding part4and usage.5 6Required properties:7- compatible: "fsl,imx6sx-iomuxc"8- fsl,pins: each entry consists of 6 integers and represents the mux and config9 setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val10 input_val> are specified using a PIN_FUNC_ID macro, which can be found in11 imx6sx-pinfunc.h under device tree source folder. The last integer CONFIG is12 the pad setting value like pull-up on this pin. Please refer to i.MX6 SoloX13 Reference Manual for detailed CONFIG settings.14 15CONFIG bits definition:16PAD_CTL_HYS (1 << 16)17PAD_CTL_PUS_100K_DOWN (0 << 14)18PAD_CTL_PUS_47K_UP (1 << 14)19PAD_CTL_PUS_100K_UP (2 << 14)20PAD_CTL_PUS_22K_UP (3 << 14)21PAD_CTL_PUE (1 << 13)22PAD_CTL_PKE (1 << 12)23PAD_CTL_ODE (1 << 11)24PAD_CTL_SPEED_LOW (0 << 6)25PAD_CTL_SPEED_MED (1 << 6)26PAD_CTL_SPEED_HIGH (3 << 6)27PAD_CTL_DSE_DISABLE (0 << 3)28PAD_CTL_DSE_260ohm (1 << 3)29PAD_CTL_DSE_130ohm (2 << 3)30PAD_CTL_DSE_87ohm (3 << 3)31PAD_CTL_DSE_65ohm (4 << 3)32PAD_CTL_DSE_52ohm (5 << 3)33PAD_CTL_DSE_43ohm (6 << 3)34PAD_CTL_DSE_37ohm (7 << 3)35PAD_CTL_SRE_FAST (1 << 0)36PAD_CTL_SRE_SLOW (0 << 0)37