44 lines · yaml
1# SPDX-License-Identifier: GPL-2.02%YAML 1.23---4$id: http://devicetree.org/schemas/power/supply/maxim,ds2760.yaml#5$schema: http://devicetree.org/meta-schemas/core.yaml#6 7title: Maxim DS27608 9maintainers:10 - Sebastian Reichel <sre@kernel.org>11 12description: |13 The ds2760 is a w1 slave device and must hence have its sub-node in14 DT under a w1 bus master node.15 16allOf:17 - $ref: power-supply.yaml#18 19properties:20 compatible:21 const: maxim,ds276022 23 maxim,pmod-enabled:24 description: |25 Allow the DS2760 to enter sleep mode when the DQ line goes low for more than 2 seconds26 and leave sleep Mode when the DQ line goes high.27 type: boolean28 29 maxim,cache-time-ms:30 description: |31 Time im milliseconds to cache the data for.32 When this time expires, the values are read again from the hardware.33 Defaults to 1000.34 35 rated-capacity-microamp-hours:36 description: |37 The rated capacity of the battery, in mAh.38 If not specified, the value stored in the non-volatile chip memory is used.39 40required:41 - compatible42 43unevaluatedProperties: false44