44 lines · plain
1* Chipselect/Local Bus2 3Properties:4- name : Should be localbus5- #address-cells : Should be either two or three. The first cell is the6 chipselect number, and the remaining cells are the7 offset into the chipselect.8- #size-cells : Either one or two, depending on how large each chipselect9 can be.10- ranges : Each range corresponds to a single chipselect, and cover11 the entire access window as configured.12 13Example:14 localbus@f0010100 {15 compatible = "fsl,mpc8272-localbus",16 "fsl,pq2-localbus";17 #address-cells = <2>;18 #size-cells = <1>;19 reg = <0xf0010100 0x40>;20 21 ranges = <0x0 0x0 0xfe000000 0x0200000022 0x1 0x0 0xf4500000 0x0000800023 0x2 0x0 0xfd810000 0x00010000>;24 25 flash@0,0 {26 compatible = "jedec-flash";27 reg = <0x0 0x0 0x2000000>;28 bank-width = <4>;29 device-width = <1>;30 };31 32 board-control@1,0 {33 reg = <0x1 0x0 0x20>;34 compatible = "fsl,mpc8272ads-bcsr";35 };36 37 simple-periph@2,0 {38 compatible = "fsl,elbc-gpcm-uio";39 reg = <0x2 0x0 0x10000>;40 elbc-gpcm-br = <0xfd810800>;41 elbc-gpcm-or = <0xffff09f7>;42 };43 };44