39 lines · plain
1Marvell 88PM800 regulator2 3Required properties:4- compatible: "marvell,88pm800"5- reg: I2C slave address6- regulators: A node that houses a sub-node for each regulator within the7 device. Each sub-node is identified using the node's name (or the deprecated8 regulator-compatible property if present), with valid values listed below.9 The content of each sub-node is defined by the standard binding for10 regulators; see regulator.txt.11 12The valid names for regulators are:13 14 buck1, buck2, buck3, buck4, buck5, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7,15 ldo8, ldo9, ldo10, ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo1916 17Example:18 19 pmic: 88pm800@31 {20 compatible = "marvell,88pm800";21 reg = <0x31>;22 23 regulators {24 buck1 {25 regulator-min-microvolt = <600000>;26 regulator-max-microvolt = <3950000>;27 regulator-boot-on;28 regulator-always-on;29 };30 ldo1 {31 regulator-min-microvolt = <600000>;32 regulator-max-microvolt = <15000000>;33 regulator-boot-on;34 regulator-always-on;35 };36...37 };38 };39