66 lines · plain
1* Powerventure Semiconductor PV88090 Voltage Regulator2 3Required properties:4- compatible: "pvs,pv88090".5- reg: I2C slave address, usually 0x48.6- interrupts: the interrupt outputs of the controller7- regulators: A node that houses a sub-node for each regulator within the8 device. Each sub-node is identified using the node's name, with valid9 values listed below. The content of each sub-node is defined by the10 standard binding for regulators; see regulator.txt.11 BUCK1, BUCK2, BUCK3, LDO1, and LDO2.12 13Optional properties:14- Any optional property defined in regulator.txt15 16Example17 18 pmic: pv88090@48 {19 compatible = "pvs,pv88090";20 reg = <0x48>;21 interrupt-parent = <&gpio>;22 interrupts = <24 24>;23 24 regulators {25 BUCK1 {26 regulator-name = "buck1";27 regulator-min-microvolt = < 600000>;28 regulator-max-microvolt = <1393750>;29 regulator-min-microamp = < 220000>;30 regulator-max-microamp = <7040000>;31 regulator-boot-on;32 };33 34 BUCK2 {35 regulator-name = "buck2";36 regulator-min-microvolt = < 600000>;37 regulator-max-microvolt = <1393750>;38 regulator-min-microamp = <1496000>;39 regulator-max-microamp = <4189000>;40 };41 42 BUCK3 {43 regulator-name = "buck3";44 regulator-min-microvolt = <600000>;45 regulator-max-microvolt = <1393750>;46 regulator-min-microamp = <1496000>;47 regulator-max-microamp = <4189000>;48 regulator-boot-on;49 };50 51 LDO1 {52 regulator-name = "ldo1";53 regulator-min-microvolt = <1200000>;54 regulator-max-microvolt = <4350000>;55 regulator-boot-on;56 };57 58 LDO2 {59 regulator-name = "ldo2";60 regulator-min-microvolt = < 650000>;61 regulator-max-microvolt = <2225000>;62 regulator-boot-on;63 };64 };65 };66