brintos

brintos / linux-shallow public Read only

0
0
Text · 6.9 KiB · bcf7888 Raw
223 lines · plain
1Regulator DT binding for MAX77620 Power management IC from Maxim Semiconductor.2 3Device has multiple DCDC(sd[0-3] and LDOs(ldo[0-8]). The input supply4of these regulators are defined under parent device node.5Details of regulator properties are defined as child node under6sub-node "regulators" which is child node of device node.7 8Please refer file <Documentation/devicetree/bindings/regulator/regulator.txt>9for common regulator bindings used by client.10 11Following are properties of parent node related to regulators.12 13Optional properties:14-------------------15The input supply of regulators are the optional properties on the16parent device node. The input supply of these regulators are provided17through following properties:18in-sd0-supply:		Input supply for SD0, INA-SD0 or INB-SD0 pins.19in-sd1-supply:		Input supply for SD1.20in-sd2-supply:		Input supply for SD2.21in-sd3-supply:		Input supply for SD3.22in-ldo0-1-supply:	Input supply for LDO0 and LDO1.23in-ldo2-supply:		Input supply for LDO2.24in-ldo3-5-supply:	Input supply for LDO3 and LDO525in-ldo4-6-supply:	Input supply for LDO4 and LDO6.26in-ldo7-8-supply:	Input supply for LDO7 and LDO8.27 28Optional sub nodes for regulators under "regulators" subnode:29------------------------------------------------------------30The subnodes name is the name of regulator and it must be one of:31	sd[0-3], ldo[0-8]32 33Each sub-node should contain the constraints and initialization34information for that regulator. The definition for each of these35nodes is defined using the standard binding for regulators found at36<Documentation/devicetree/bindings/regulator/regulator.txt>.37 38There are also additional properties for SD/LDOs. These additional properties39are required to configure FPS configuration parameters for SDs and LDOs.40Please refer <devicetree/bindings/mfd/max77620.txt> for more detail of Flexible41Power Sequence (FPS).42Following are additional properties:43 44- maxim,active-fps-source:		FPS source for the regulators to get45					enabled/disabled when system is in46					active state.  Valid values are:47					- MAX77620_FPS_SRC_0,48						FPS source is FPS0.49					- MAX77620_FPS_SRC_1,50						FPS source is FPS151					- MAX77620_FPS_SRC_2 and52						FPS source is FPS253					- MAX77620_FPS_SRC_NONE.54						Regulator is not controlled55						by FPS events and it gets56						enabled/disabled by register57						access.58					Absence of this property will leave59					the FPS configuration register for that60					regulator to default configuration.61 62- maxim,active-fps-power-up-slot:	Sequencing event slot number on which63					the regulator get enabled when64					master FPS input event set to HIGH.65					Valid values are 0 to 7.66					This is applicable if FPS source is67					selected as FPS0, FPS1 or FPS2.68			69- maxim,active-fps-power-down-slot:	Sequencing event slot number on which70					the regulator get disabled when master71					FPS input event set to LOW.72					Valid values are 0 to 7.73					This is applicable if FPS source is74					selected as FPS0, FPS1 or FPS2.75			76- maxim,suspend-fps-source:		This is same as property77					"maxim,active-fps-source" but value78					get configured when system enters in79					to suspend state.80 81- maxim,suspend-fps-power-up-slot:	This is same as property82					"maxim,active-fps-power-up-slot" but83					this value get configured into FPS84					configuration register when system85					enters into suspend.86					This is applicable if suspend state87					FPS source is selected as FPS0, FPS1 or88 89- maxim,suspend-fps-power-down-slot:	This is same as property90					"maxim,active-fps-power-down-slot" but91					this value get configured into FPS92					configuration register when system93					enters into suspend.94					This is applicable if suspend state95					FPS source is selected as FPS0, FPS1 or96					FPS2.97- maxim,ramp-rate-setting:		integer, ramp rate(uV/us) setting to be98					configured to the device.99					The platform may have different ramp100					rate than advertised ramp rate if it has101					design variation from Maxim's102					recommended. On this case, platform103					specific ramp rate is used for ramp time104					calculation and this property is used105					for device register configurations.106					The measured ramp rate of platform is107					provided by the regulator-ramp-delay108					as described in <devicetree/bindings/109					regulator/regulator.txt>.110					Maxim Max77620 supports following ramp111					delay:112					  SD: 13.75mV/us, 27.5mV/us, 55mV/us113					  LDOs: 5mV/us, 100mV/us114 115Note: If the measured ramp delay is same as advertised ramp delay then it is not116required to provide the ramp delay with property "maxim,ramp-rate-setting". The117ramp rate can be provided by the regulator-ramp-delay which will be used for118ramp time calculation for voltage change as well as for device configuration.119 120Example:121--------122#include <dt-bindings/mfd/max77620.h>123...124max77620@3c {125	in-ldo0-1-supply = <&max77620_sd2>;126	in-ldo7-8-supply = <&max77620_sd2>;127	regulators {128		sd0 {129			regulator-name = "vdd-core";130			regulator-min-microvolt = <600000>;131			regulator-max-microvolt = <1400000>;132			regulator-boot-on;133			regulator-always-on;134			maxim,active-fps-source = <MAX77620_FPS_SRC_1>;135		};136 137		sd1 {138			regulator-name = "vddio-ddr";139			regulator-min-microvolt = <1200000>;140			regulator-max-microvolt = <1200000>;141			regulator-always-on;142			regulator-boot-on;143			maxim,active-fps-source = <MAX77620_FPS_SRC_0>;144		};145 146		sd2 {147			regulator-name = "vdd-pre-reg";148			regulator-min-microvolt = <1350000>;149			regulator-max-microvolt = <1350000>;150		};151 152		sd3 {153			regulator-name = "vdd-1v8";154			regulator-min-microvolt = <1800000>;155			regulator-max-microvolt = <1800000>;156			regulator-always-on;157			regulator-boot-on;158		};159 160		ldo0 {161			regulator-name = "avdd-sys";162			regulator-min-microvolt = <1200000>;163			regulator-max-microvolt = <1200000>;164			regulator-always-on;165			regulator-boot-on;166		};167 168		ldo1 {169			regulator-name = "vdd-pex";170			regulator-min-microvolt = <1050000>;171			regulator-max-microvolt = <1050000>;172		};173 174		ldo2 {175			regulator-name = "vddio-sdmmc3";176			regulator-min-microvolt = <1800000>;177			regulator-max-microvolt = <3300000>;178		};179 180		ldo3 {181			regulator-name = "vdd-cam-hv";182			regulator-min-microvolt = <2800000>;183			regulator-max-microvolt = <2800000>;184		};185 186		ldo4 {187			regulator-name = "vdd-rtc";188			regulator-min-microvolt = <1250000>;189			regulator-max-microvolt = <1250000>;190			regulator-always-on;191			regulator-boot-on;192		};193 194		ldo5 {195			regulator-name = "avdd-ts-hv";196			regulator-min-microvolt = <3000000>;197			regulator-max-microvolt = <3000000>;198		};199 200		ldo6 {201			regulator-name = "vdd-ts";202			regulator-min-microvolt = <1800000>;203			regulator-max-microvolt = <1800000>;204			regulator-always-on;205			regulator-boot-on;206		};207 208		ldo7 {209			regulator-name = "vdd-gen-pll-edp";210			regulator-min-microvolt = <1050000>;211			regulator-max-microvolt = <1050000>;212			regulator-always-on;213			regulator-boot-on;214		};215 216		ldo8 {217			regulator-name = "vdd-hdmi-dp";218			regulator-min-microvolt = <1050000>;219			regulator-max-microvolt = <1050000>;220		};221	};222};223