28 lines · plain
1TPS51632 Voltage regulators2 3Required properties:4- compatible: Must be "ti,tps51632"5- reg: I2C slave address6 7Optional properties:8- ti,enable-pwm-dvfs: Enable the DVFS voltage control through the PWM interface.9- ti,dvfs-step-20mV: The 20mV step voltage when PWM DVFS enabled. Missing this10 will set 10mV step voltage in PWM DVFS mode. In normal mode, the voltage11 step is 10mV as per datasheet.12 13Any property defined as part of the core regulator binding, defined in14regulator.txt, can also be used.15 16Example:17 18 tps51632 {19 compatible = "ti,tps51632";20 reg = <0x43>;21 regulator-name = "tps51632-vout";22 regulator-min-microvolt = <500000>;23 regulator-max-microvolt = <1500000>;24 regulator-boot-on;25 ti,enable-pwm-dvfs;26 ti,dvfs-step-20mV;27 };28