348 lines · yaml
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)2%YAML 1.23---4$id: http://devicetree.org/schemas/remoteproc/ti,k3-r5f-rproc.yaml#5$schema: http://devicetree.org/meta-schemas/core.yaml#6 7title: TI K3 R5F processor subsystems8 9maintainers:10 - Suman Anna <s-anna@ti.com>11 12description: |13 The TI K3 family of SoCs usually have one or more dual-core Arm Cortex R5F14 processor subsystems/clusters (R5FSS). The dual core cluster can be used15 either in a LockStep mode providing safety/fault tolerance features or in a16 Split mode providing two individual compute cores for doubling the compute17 capacity on most SoCs. These are used together with other processors present18 on the SoC to achieve various system level goals.19 20 AM64x SoCs do not support LockStep mode, but rather a new non-safety mode21 called "Single-CPU" mode, where only Core0 is used, but with ability to use22 Core1's TCMs as well.23 24 AM62 SoC family support a single R5F core only which runs Device Manager25 firmware and can also be used as a remote processor with IPC communication.26 27 Each Dual-Core R5F sub-system is represented as a single DTS node28 representing the cluster, with a pair of child DT nodes representing29 the individual R5F cores. Each node has a number of required or optional30 properties that enable the OS running on the host processor to perform31 the device management of the remote processor and to communicate with the32 remote processor.33 34properties:35 $nodename:36 pattern: "^r5fss(@.*)?"37 38 compatible:39 enum:40 - ti,am62-r5fss41 - ti,am64-r5fss42 - ti,am654-r5fss43 - ti,j7200-r5fss44 - ti,j721e-r5fss45 - ti,j721s2-r5fss46 47 power-domains:48 description: |49 Should contain a phandle to a PM domain provider node and an args50 specifier containing the R5FSS device id value.51 maxItems: 152 53 "#address-cells":54 const: 155 56 "#size-cells":57 const: 158 59 ranges:60 description: |61 Standard ranges definition providing address translations for62 local R5F TCM address spaces to bus addresses.63 64# Optional properties:65# --------------------66 67 ti,cluster-mode:68 $ref: /schemas/types.yaml#/definitions/uint3269 description: |70 Configuration Mode for the Dual R5F cores within the R5F cluster.71 For most SoCs (AM65x, J721E, J7200, J721s2),72 It should be either a value of 1 (LockStep mode) or 0 (Split mode) on73 most SoCs (AM65x, J721E, J7200, J721s2), default is LockStep mode if74 omitted.75 For AM64x SoCs,76 It should be either a value of 0 (Split mode) or 2 (Single-CPU mode) and77 default is Split mode if omitted.78 For AM62x SoCs,79 It should be set as 3 (Single-Core mode) which is also the default if80 omitted.81 82 83# R5F Processor Child Nodes:84# ==========================85 86patternProperties:87 "^r5f@[a-f0-9]+$":88 type: object89 description: |90 The R5F Sub-System device node should define two R5F child nodes, each91 node representing a TI instantiation of the Arm Cortex R5F core. There92 are some specific integration differences for the IP like the usage of93 a Region Address Translator (RAT) for translating the larger SoC bus94 addresses into a 32-bit address space for the processor. For AM62x,95 the R5F Sub-System device node should only define one R5F child node96 as it has only one core available.97 98 Each R5F core has an associated 64 KB of Tightly-Coupled Memory (TCM)99 internal memories split between two banks - TCMA and TCMB (further100 interleaved into two banks TCMB0 and TCMB1). These memories (also called101 ATCM and BTCM) provide read/write performance on par with the core's L1102 caches. Each of the TCMs can be enabled or disabled independently and103 either of them can be configured to appear at that R5F's address 0x0.104 105 The cores do not use an MMU, but has a Region Address Translator106 (RAT) module that is accessible only from the R5Fs for providing107 translations between 32-bit CPU addresses into larger system bus108 addresses. Cache and memory access settings are provided through a109 Memory Protection Unit (MPU), programmable only from the R5Fs.110 111 $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#112 113 properties:114 compatible:115 enum:116 - ti,am62-r5f117 - ti,am64-r5f118 - ti,am654-r5f119 - ti,j7200-r5f120 - ti,j721e-r5f121 - ti,j721s2-r5f122 123 reg:124 items:125 - description: Address and Size of the ATCM internal memory region126 - description: Address and Size of the BTCM internal memory region127 128 reg-names:129 items:130 - const: atcm131 - const: btcm132 133 resets:134 description: |135 Should contain the phandle to the reset controller node managing the136 local resets for this device, and a reset specifier.137 maxItems: 1138 139 firmware-name:140 description: |141 Should contain the name of the default firmware image142 file located on the firmware search path143 144# The following properties are mandatory for R5F Core0 in both LockStep and Split145# modes, and are mandatory for R5F Core1 _only_ in Split mode. They are unused for146# R5F Core1 in LockStep mode:147 148 mboxes:149 description: |150 OMAP Mailbox specifier denoting the sub-mailbox, to be used for151 communication with the remote processor. This property should match152 with the sub-mailbox node used in the firmware image.153 maxItems: 1154 155 memory-region:156 description: |157 phandle to the reserved memory nodes to be associated with the158 remoteproc device. There should be at least two reserved memory nodes159 defined. The reserved memory nodes should be carveout nodes, and160 should be defined with a "no-map" property as per the bindings in161 Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt162 minItems: 2163 maxItems: 8164 items:165 - description: region used for dynamic DMA allocations like vrings and166 vring buffers167 - description: region reserved for firmware image sections168 additionalItems: true169 170 171# Optional properties:172# --------------------173# The following properties are optional properties for each of the R5F cores:174 175 ti,atcm-enable:176 $ref: /schemas/types.yaml#/definitions/uint32177 enum: [0, 1]178 description: |179 R5F core configuration mode dictating if ATCM should be enabled. The180 R5F address of ATCM is dictated by ti,loczrama property. Should be181 either a value of 1 (enabled) or 0 (disabled), default is disabled182 if omitted. Recommended to enable it for maximizing TCMs.183 184 ti,btcm-enable:185 $ref: /schemas/types.yaml#/definitions/uint32186 enum: [0, 1]187 description: |188 R5F core configuration mode dictating if BTCM should be enabled. The189 R5F address of BTCM is dictated by ti,loczrama property. Should be190 either a value of 1 (enabled) or 0 (disabled), default is enabled if191 omitted.192 193 ti,loczrama:194 $ref: /schemas/types.yaml#/definitions/uint32195 enum: [0, 1]196 description: |197 R5F core configuration mode dictating which TCM should appear at198 address 0 (from core's view). Should be either a value of 1 (ATCM199 at 0x0) or 0 (BTCM at 0x0), default value is 1 if omitted.200 201 sram:202 $ref: /schemas/types.yaml#/definitions/phandle-array203 minItems: 1204 maxItems: 4205 items:206 maxItems: 1207 description: |208 phandles to one or more reserved on-chip SRAM regions. The regions209 should be defined as child nodes of the respective SRAM node, and210 should be defined as per the generic bindings in,211 Documentation/devicetree/bindings/sram/sram.yaml212 213 required:214 - compatible215 - reg216 - reg-names217 - ti,sci218 - ti,sci-dev-id219 - ti,sci-proc-ids220 - resets221 - firmware-name222 223 unevaluatedProperties: false224 225allOf:226 - if:227 properties:228 compatible:229 enum:230 - ti,am64-r5fss231 then:232 properties:233 ti,cluster-mode:234 enum: [0, 2]235 236 - if:237 properties:238 compatible:239 enum:240 - ti,am654-r5fss241 - ti,j7200-r5fss242 - ti,j721e-r5fss243 - ti,j721s2-r5fss244 then:245 properties:246 ti,cluster-mode:247 enum: [0, 1]248 249 - if:250 properties:251 compatible:252 enum:253 - ti,am62-r5fss254 then:255 properties:256 ti,cluster-mode:257 enum: [3]258 259required:260 - compatible261 - power-domains262 - "#address-cells"263 - "#size-cells"264 - ranges265 266additionalProperties: false267 268examples:269 - |270 soc {271 #address-cells = <2>;272 #size-cells = <2>;273 274 mailbox0: mailbox-0 {275 #mbox-cells = <1>;276 };277 278 mailbox1: mailbox-1 {279 #mbox-cells = <1>;280 };281 282 bus@100000 {283 compatible = "simple-bus";284 #address-cells = <2>;285 #size-cells = <2>;286 ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */287 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,288 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,289 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>;290 291 bus@28380000 {292 compatible = "simple-bus";293 #address-cells = <2>;294 #size-cells = <2>;295 ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS */296 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */297 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */298 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>; /* MCU SRAM */299 300 /* AM65x MCU R5FSS node */301 mcu_r5fss0: r5fss@41000000 {302 compatible = "ti,am654-r5fss";303 power-domains = <&k3_pds 129>;304 ti,cluster-mode = <1>;305 #address-cells = <1>;306 #size-cells = <1>;307 ranges = <0x41000000 0x00 0x41000000 0x20000>,308 <0x41400000 0x00 0x41400000 0x20000>;309 310 mcu_r5f0: r5f@41000000 {311 compatible = "ti,am654-r5f";312 reg = <0x41000000 0x00008000>,313 <0x41010000 0x00008000>;314 reg-names = "atcm", "btcm";315 ti,sci = <&dmsc>;316 ti,sci-dev-id = <159>;317 ti,sci-proc-ids = <0x01 0xFF>;318 resets = <&k3_reset 159 1>;319 firmware-name = "am65x-mcu-r5f0_0-fw";320 ti,atcm-enable = <1>;321 ti,btcm-enable = <1>;322 ti,loczrama = <1>;323 mboxes = <&mailbox0 &mbox_mcu_r5fss0_core0>;324 memory-region = <&mcu_r5fss0_core0_dma_memory_region>,325 <&mcu_r5fss0_core0_memory_region>;326 sram = <&mcu_r5fss0_core0_sram>;327 };328 329 mcu_r5f1: r5f@41400000 {330 compatible = "ti,am654-r5f";331 reg = <0x41400000 0x00008000>,332 <0x41410000 0x00008000>;333 reg-names = "atcm", "btcm";334 ti,sci = <&dmsc>;335 ti,sci-dev-id = <245>;336 ti,sci-proc-ids = <0x02 0xFF>;337 resets = <&k3_reset 245 1>;338 firmware-name = "am65x-mcu-r5f0_1-fw";339 ti,atcm-enable = <1>;340 ti,btcm-enable = <1>;341 ti,loczrama = <1>;342 mboxes = <&mailbox1 &mbox_mcu_r5fss0_core1>;343 };344 };345 };346 };347 };348