43 lines · plain
1RT1011 Mono Class D Audio Amplifier2 3This device supports I2C only.4 5Required properties:6 7- compatible : "realtek,rt1011".8 9- reg : The I2C address of the device. This I2C address decide by10 two input pins (ASEL1 and ASEL2).11 -------------------------------------12 | ASEL2 | ASEL1 | Address |13 -------------------------------------14 | 0 | 0 | 0x38 |15 -------------------------------------16 | 0 | 1 | 0x39 |17 -------------------------------------18 | 1 | 0 | 0x3a |19 -------------------------------------20 | 1 | 1 | 0x3b |21 -------------------------------------22 23Optional properties:24 25- realtek,temperature_calib26 u32. The temperature was measured while doing the calibration. Units: Celsius degree27 28- realtek,r0_calib29 u32. This is r0 calibration data which was measured in factory mode.30 31Pins on the device (for linking into audio routes) for RT1011:32 33 * SPO34 35Example:36 37rt1011: codec@38 {38 compatible = "realtek,rt1011";39 reg = <0x38>;40 realtek,temperature_calib = <25>;41 realtek,r0_calib = <0x224050>;42};43