45 lines · plain
1Richtek RT1711H TypeC PD Controller.2 3Required properties:4 - compatible : Must be "richtek,rt1711h".5 - reg : Must be 0x4e, it's slave address of RT1711H.6 - interrupts : <a b> where a is the interrupt number and b represents an7 encoding of the sense and level information for the interrupt.8 9Required sub-node:10- connector: The "usb-c-connector" attached to the tcpci chip, the bindings11 of connector node are specified in12 Documentation/devicetree/bindings/connector/usb-connector.yaml13 14Example :15rt1711h@4e {16 compatible = "richtek,rt1711h";17 reg = <0x4e>;18 interrupt-parent = <&gpio26>;19 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;20 21 usb_con: connector {22 compatible = "usb-c-connector";23 label = "USB-C";24 data-role = "dual";25 power-role = "dual";26 try-power-role = "sink";27 source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;28 sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)29 PDO_VAR(5000, 12000, 2000)>;30 op-sink-microwatt = <10000000>;31 32 ports {33 #address-cells = <1>;34 #size-cells = <0>;35 36 port@1 {37 reg = <1>;38 usb_con_ss: endpoint {39 remote-endpoint = <&usb3_data_ss>;40 };41 };42 };43 };44};45