101 lines · yaml
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)2%YAML 1.23---4$id: http://devicetree.org/schemas/usb/richtek,rt1711h.yaml#5$schema: http://devicetree.org/meta-schemas/core.yaml#6 7title: Richtek RT1711H Type-C Port Switch and Power Delivery controller8 9maintainers:10 - Gene Chen <gene_chen@richtek.com>11 12description: |13 The RT1711H is a USB Type-C controller that complies with the latest14 USB Type-C and PD standards. It does the USB Type-C detection including attach15 and orientation. It integrates the physical layer of the USB BMC power16 delivery protocol to allow up to 100W of power. The BMC PD block enables full17 support for alternative interfaces of the Type-C specification.18 19properties:20 compatible:21 enum:22 - richtek,rt1711h23 - richtek,rt171524 description:25 RT1711H support PD20, RT1715 support PD30 except Fast Role Swap.26 27 reg:28 maxItems: 129 30 interrupts:31 maxItems: 132 33 wakeup-source:34 type: boolean35 36 connector:37 type: object38 $ref: /schemas/connector/usb-connector.yaml#39 description:40 Properties for usb c connector.41 42additionalProperties: false43 44required:45 - compatible46 - reg47 - connector48 - interrupts49 50examples:51 - |52 #include <dt-bindings/interrupt-controller/irq.h>53 #include <dt-bindings/usb/pd.h>54 i2c {55 #address-cells = <1>;56 #size-cells = <0>;57 58 rt1711h@4e {59 compatible = "richtek,rt1711h";60 reg = <0x4e>;61 interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;62 wakeup-source;63 64 connector {65 compatible = "usb-c-connector";66 label = "USB-C";67 data-role = "dual";68 power-role = "dual";69 try-power-role = "sink";70 source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;71 sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;72 op-sink-microwatt = <10000000>;73 74 ports {75 #address-cells = <1>;76 #size-cells = <0>;77 78 port@0 {79 reg = <0>;80 endpoint {81 remote-endpoint = <&usb_hs>;82 };83 };84 port@1 {85 reg = <1>;86 endpoint {87 remote-endpoint = <&usb_ss>;88 };89 };90 port@2 {91 reg = <2>;92 endpoint {93 remote-endpoint = <&dp_aux>;94 };95 };96 };97 };98 };99 };100...101