42 lines · plain
1Kernel driver tmp1082====================3 4Supported chips:5 6 * Texas Instruments TMP1087 8 Prefix: 'tmp108'9 10 Addresses scanned: none11 12 Datasheet: https://www.ti.com/product/tmp10813 14Author:15 16 John Muir <john@jmuir.com>17 18Description19-----------20 21The Texas Instruments TMP108 implements one temperature sensor. An alert pin22can be set when temperatures exceed minimum or maximum values plus or minus a23hysteresis value. (This driver does not support interrupts for the alert pin,24and the device runs in comparator mode.)25 26The sensor is accurate to 0.75C over the range of -25 to +85 C, and to 1.027degree from -40 to +125 C. Resolution of the sensor is 0.0625 degree. The28operating temperature has a minimum of -55 C and a maximum of +150 C.29Hysteresis values can be set to 0, 1, 2, or 4C.30 31The TMP108 has a programmable update rate that can select between 8, 4, 1, and320.5 Hz.33 34By default the TMP108 reads the temperature continuously. To conserve power,35the TMP108 has a one-shot mode where the device is normally shut-down. When a36one shot is requested the temperature is read, the result can be retrieved,37and then the device is shut down automatically. (This driver only supports38continuous mode.)39 40The driver provides the common sysfs-interface for temperatures (see41Documentation/hwmon/sysfs-interface.rst under Temperatures).42