1140 lines · bash
1#! /bin/sh2#3# Turtle Beach MultiSound Driver Notes4# -- Andrew Veliath <andrewtv@usa.net>5#6# Last update: September 10, 19987# Corresponding msnd driver: 0.8.38#9# ** This file is a README (top part) and shell archive (bottom part).10# The corresponding archived utility sources can be unpacked by11# running `sh MultiSound' (the utilities are only needed for the12# Pinnacle and Fiji cards). **13#14#15# -=-=- Getting Firmware -=-=-16# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~17#18# See the section `Obtaining and Creating Firmware Files' in this19# document for instructions on obtaining the necessary firmware20# files.21#22#23# Supported Features24# ~~~~~~~~~~~~~~~~~~25#26# Currently, full-duplex digital audio (/dev/dsp only, /dev/audio is27# not currently available) and mixer functionality (/dev/mixer) are28# supported (memory mapped digital audio is not yet supported).29# Digital transfers and monitoring can be done as well if you have30# the digital daughterboard (see the section on using the S/PDIF port31# for more information).32#33# Support for the Turtle Beach MultiSound Hurricane architecture is34# composed of the following modules (these can also operate compiled35# into the kernel):36#37# snd-msnd-lib - MultiSound base (requires snd)38#39# snd-msnd-classic - Base audio/mixer support for Classic, Monetery and40# Tahiti cards41#42# snd-msnd-pinnacle - Base audio/mixer support for Pinnacle and Fiji cards43#44#45# Important Notes - Read Before Using46# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~47#48# The firmware files are not included (may change in future). You49# must obtain these images from Turtle Beach (they are included in50# the MultiSound Development Kits), and place them in /etc/sound for51# example, and give the full paths in the Linux configuration. If52# you are compiling in support for the MultiSound driver rather than53# using it as a module, these firmware files must be accessible54# during kernel compilation.55#56# Please note these files must be binary files, not assembler. See57# the section later in this document for instructions to obtain these58# files.59#60#61# Configuring Card Resources62# ~~~~~~~~~~~~~~~~~~~~~~~~~~63#64# ** This section is very important, as your card may not work at all65# or your machine may crash if you do not do this correctly. **66#67# * Classic/Monterey/Tahiti68#69# These cards are configured through the driver snd-msnd-classic. You must70# know the io port, then the driver will select the irq and memory resources71# on the card. It is up to you to know if these are free locations or now,72# a conflict can lock the machine up.73#74# * Pinnacle/Fiji75#76# The Pinnacle and Fiji cards have an extra config port, either77# 0x250, 0x260 or 0x270. This port can be disabled to have the card78# configured strictly through PnP, however you lose the ability to79# access the IDE controller and joystick devices on this card when80# using PnP. The included pinnaclecfg program in this shell archive81# can be used to configure the card in non-PnP mode, and in PnP mode82# you can use isapnptools. These are described briefly here.83#84# pinnaclecfg is not required; you can use the snd-msnd-pinnacle module85# to fully configure the card as well. However, pinnaclecfg can be86# used to change the resource values of a particular device after the87# snd-msnd-pinnacle module has been loaded. If you are compiling the88# driver into the kernel, you must set these values during compile89# time, however other peripheral resource values can be changed with90# the pinnaclecfg program after the kernel is loaded.91#92#93# *** PnP mode94#95# Use pnpdump to obtain a sample configuration if you can; I was able96# to obtain one with the command `pnpdump 1 0x203' -- this may vary97# for you (running pnpdump by itself did not work for me). Then,98# edit this file and use isapnp to uncomment and set the card values.99# Use these values when inserting the snd-msnd-pinnacle module. Using100# this method, you can set the resources for the DSP and the Kurzweil101# synth (Pinnacle). Since Linux does not directly support PnP102# devices, you may have difficulty when using the card in PnP mode103# when it the driver is compiled into the kernel. Using non-PnP mode104# is preferable in this case.105#106# Here is an example mypinnacle.conf for isapnp that sets the card to107# io base 0x210, irq 5 and mem 0xd8000, and also sets the Kurzweil108# synth to 0x330 and irq 9 (may need editing for your system):109#110# (READPORT 0x0203)111# (CSN 2)112# (IDENTIFY *)113#114# # DSP115# (CONFIGURE BVJ0440/-1 (LD 0116# (INT 0 (IRQ 5 (MODE +E))) (IO 0 (BASE 0x0210)) (MEM 0 (BASE 0x0d8000))117# (ACT Y)))118#119# # Kurzweil Synth (Pinnacle Only)120# (CONFIGURE BVJ0440/-1 (LD 1121# (IO 0 (BASE 0x0330)) (INT 0 (IRQ 9 (MODE +E)))122# (ACT Y)))123#124# (WAITFORKEY)125#126#127# *** Non-PnP mode128#129# The second way is by running the card in non-PnP mode. This130# actually has some advantages in that you can access some other131# devices on the card, such as the joystick and IDE controller. To132# configure the card, unpack this shell archive and build the133# pinnaclecfg program. Using this program, you can assign the134# resource values to the card's devices, or disable the devices. As135# an alternative to using pinnaclecfg, you can specify many of the136# configuration values when loading the snd-msnd-pinnacle module (or137# during kernel configuration when compiling the driver into the138# kernel).139#140# If you specify cfg=0x250 for the snd-msnd-pinnacle module, it141# automatically configure the card to the given io, irq and memory142# values using that config port (the config port is jumper selectable143# on the card to 0x250, 0x260 or 0x270).144#145# See the `snd-msnd-pinnacle Additional Options' section below for more146# information on these parameters (also, if you compile the driver147# directly into the kernel, these extra parameters can be useful148# here).149#150#151# ** It is very easy to cause problems in your machine if you choose a152# resource value which is incorrect. **153#154#155# Examples156# ~~~~~~~~157#158# * MultiSound Classic/Monterey/Tahiti:159#160# modprobe snd161# insmod snd-msnd-lib162# insmod snd-msnd-classic io=0x290 irq=7 mem=0xd0000163#164# * MultiSound Pinnacle in PnP mode:165#166# modprobe snd167# insmod snd-msnd-lib168# isapnp mypinnacle.conf169# insmod snd-msnd-pinnacle io=0x210 irq=5 mem=0xd8000 <-- match mypinnacle.conf values170#171# * MultiSound Pinnacle in non-PnP mode (replace 0x250 with your configuration port,172# one of 0x250, 0x260 or 0x270):173#174# modprobe snd175# insmod snd-msnd-lib176# insmod snd-msnd-pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000177#178# * To use the MPU-compatible Kurzweil synth on the Pinnacle in PnP179# mode, add the following (assumes you did `isapnp mypinnacle.conf'):180#181# insmod snd182# insmod mpu401 io=0x330 irq=9 <-- match mypinnacle.conf values183#184# * To use the MPU-compatible Kurzweil synth on the Pinnacle in non-PnP185# mode, add the following. Note how we first configure the peripheral's186# resources, _then_ install a Linux driver for it:187#188# insmod snd189# pinnaclecfg 0x250 mpu 0x330 9190# insmod mpu401 io=0x330 irq=9191#192# -- OR you can use the following sequence without pinnaclecfg in non-PnP mode:193#194# modprobe snd195# insmod snd-msnd-lib196# insmod snd-msnd-pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 mpu_io=0x330 mpu_irq=9197# insmod snd198# insmod mpu401 io=0x330 irq=9199#200# * To setup the joystick port on the Pinnacle in non-PnP mode (though201# you have to find the actual Linux joystick driver elsewhere), you202# can use pinnaclecfg:203#204# pinnaclecfg 0x250 joystick 0x200205#206# -- OR you can configure this using snd-msnd-pinnacle with the following:207#208# modprobe snd209# insmod snd-msnd-lib210# insmod snd-msnd-pinnacle cfg=0x250 io=0x290 irq=5 mem=0xd0000 joystick_io=0x200211#212#213# snd-msnd-classic, snd-msnd-pinnacle Required Options214# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~215#216# If the following options are not given, the module will not load.217# Examine the kernel message log for informative error messages.218# WARNING--probing isn't supported so try to make sure you have the219# correct shared memory area, otherwise you may experience problems.220#221# io I/O base of DSP, e.g. io=0x210222# irq IRQ number, e.g. irq=5223# mem Shared memory area, e.g. mem=0xd8000224#225#226# snd-msnd-classic, snd-msnd-pinnacle Additional Options227# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~228#229# fifosize The digital audio FIFOs, in kilobytes. If not230# specified, the default will be used. Increasing231# this value will reduce the chance of a FIFO232# underflow at the expense of increasing overall233# latency. For example, fifosize=512 will234# allocate 512kB read and write FIFOs (1MB total).235# While this may reduce dropouts, a heavy machine236# load will undoubtedly starve the FIFO of data237# and you will eventually get dropouts. One238# option is to alter the scheduling priority of239# the playback process, using `nice' or some form240# of POSIX soft real-time scheduling.241#242# calibrate_signal Setting this to one calibrates the ADCs to the243# signal, zero calibrates to the card (defaults244# to zero).245#246#247# snd-msnd-pinnacle Additional Options248# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~249#250# digital Specify digital=1 to enable the S/PDIF input251# if you have the digital daughterboard252# adapter. This will enable access to the253# DIGITAL1 input for the soundcard in the mixer.254# Some mixer programs might have trouble setting255# the DIGITAL1 source as an input. If you have256# trouble, you can try the setdigital.c program257# at the bottom of this document.258#259# cfg Non-PnP configuration port for the Pinnacle260# and Fiji (typically 0x250, 0x260 or 0x270,261# depending on the jumper configuration). If262# this option is omitted, then it is assumed263# that the card is in PnP mode, and that the264# specified DSP resource values are already265# configured with PnP (i.e. it won't attempt to266# do any sort of configuration).267#268# When the Pinnacle is in non-PnP mode, you can use the following269# options to configure particular devices. If a full specification270# for a device is not given, then the device is not configured. Note271# that you still must use a Linux driver for any of these devices272# once their resources are setup (such as the Linux joystick driver,273# or the MPU401 driver from OSS for the Kurzweil synth).274#275# mpu_io I/O port of MPU (on-board Kurzweil synth)276# mpu_irq IRQ of MPU (on-board Kurzweil synth)277# ide_io0 First I/O port of IDE controller278# ide_io1 Second I/O port of IDE controller279# ide_irq IRQ IDE controller280# joystick_io I/O port of joystick281#282#283# Obtaining and Creating Firmware Files284# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~285#286# For the Classic/Tahiti/Monterey287# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~288#289# Download to /tmp and unzip the following file from Turtle Beach:290#291# ftp://ftp.voyetra.com/pub/tbs/msndcl/msndvkit.zip292#293# When unzipped, unzip the file named MsndFiles.zip. Then copy the294# following firmware files to /etc/sound (note the file renaming):295#296# cp DSPCODE/MSNDINIT.BIN /etc/sound/msndinit.bin297# cp DSPCODE/MSNDPERM.REB /etc/sound/msndperm.bin298#299# When configuring the Linux kernel, specify /etc/sound/msndinit.bin and300# /etc/sound/msndperm.bin for the two firmware files (Linux kernel301# versions older than 2.2 do not ask for firmware paths, and are302# hardcoded to /etc/sound).303#304# If you are compiling the driver into the kernel, these files must305# be accessible during compilation, but will not be needed later.306# The files must remain, however, if the driver is used as a module.307#308#309# For the Pinnacle/Fiji310# ~~~~~~~~~~~~~~~~~~~~~311#312# Download to /tmp and unzip the following file from Turtle Beach (be313# sure to use the entire URL; some have had trouble navigating to the314# URL):315#316# ftp://ftp.voyetra.com/pub/tbs/pinn/pnddk100.zip317#318# Unpack this shell archive, and run make in the created directory319# (you need a C compiler and flex to build the utilities). This320# should give you the executables conv, pinnaclecfg and setdigital.321# conv is only used temporarily here to create the firmware files,322# while pinnaclecfg is used to configure the Pinnacle or Fiji card in323# non-PnP mode, and setdigital can be used to set the S/PDIF input on324# the mixer (pinnaclecfg and setdigital should be copied to a325# convenient place, possibly run during system initialization).326#327# To generating the firmware files with the `conv' program, we create328# the binary firmware files by doing the following conversion329# (assuming the archive unpacked into a directory named PINNDDK):330#331# ./conv < PINNDDK/dspcode/pndspini.asm > /etc/sound/pndspini.bin332# ./conv < PINNDDK/dspcode/pndsperm.asm > /etc/sound/pndsperm.bin333#334# The conv (and conv.l) program is not needed after conversion and can335# be safely deleted. Then, when configuring the Linux kernel, specify336# /etc/sound/pndspini.bin and /etc/sound/pndsperm.bin for the two337# firmware files (Linux kernel versions older than 2.2 do not ask for338# firmware paths, and are hardcoded to /etc/sound).339#340# If you are compiling the driver into the kernel, these files must341# be accessible during compilation, but will not be needed later.342# The files must remain, however, if the driver is used as a module.343#344#345# Using Digital I/O with the S/PDIF Port346# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~347#348# If you have a Pinnacle or Fiji with the digital daughterboard and349# want to set it as the input source, you can use this program if you350# have trouble trying to do it with a mixer program (be sure to351# insert the module with the digital=1 option, or say Y to the option352# during compiled-in kernel operation). Upon selection of the S/PDIF353# port, you should be able monitor and record from it.354#355# There is something to note about using the S/PDIF port. Digital356# timing is taken from the digital signal, so if a signal is not357# connected to the port and it is selected as recording input, you358# will find PCM playback to be distorted in playback rate. Also,359# attempting to record at a sampling rate other than the DAT rate may360# be problematic (i.e. trying to record at 8000Hz when the DAT signal361# is 44100Hz). If you have a problem with this, set the recording362# input to analog if you need to record at a rate other than that of363# the DAT rate.364#365#366# -- Shell archive attached below, just run `sh MultiSound' to extract.367# Contains Pinnacle/Fiji utilities to convert firmware, configure368# in non-PnP mode, and select the DIGITAL1 input for the mixer.369#370#371#!/bin/sh372# This is a shell archive (produced by GNU sharutils 4.2).373# To extract the files from this archive, save it to some FILE, remove374# everything before the `!/bin/sh' line above, then type `sh FILE'.375#376# Made on 1998-12-04 10:07 EST by <andrewtv@ztransform.velsoft.com>.377# Source directory was `/home/andrewtv/programming/pinnacle/pinnacle'.378#379# Existing files will *not* be overwritten unless `-c' is specified.380#381# This shar contains:382# length mode name383# ------ ---------- ------------------------------------------384# 2064 -rw-rw-r-- MultiSound.d/setdigital.c385# 10224 -rw-rw-r-- MultiSound.d/pinnaclecfg.c386# 106 -rw-rw-r-- MultiSound.d/Makefile387# 146 -rw-rw-r-- MultiSound.d/conv.l388# 1491 -rw-rw-r-- MultiSound.d/msndreset.c389#390save_IFS="${IFS}"391IFS="${IFS}:"392gettext_dir=FAILED393locale_dir=FAILED394first_param="$1"395for dir in $PATH396do397 if test "$gettext_dir" = FAILED && test -f $dir/gettext \398 && ($dir/gettext --version >/dev/null 2>&1)399 then400 set `$dir/gettext --version 2>&1`401 if test "$3" = GNU402 then403 gettext_dir=$dir404 fi405 fi406 if test "$locale_dir" = FAILED && test -f $dir/shar \407 && ($dir/shar --print-text-domain-dir >/dev/null 2>&1)408 then409 locale_dir=`$dir/shar --print-text-domain-dir`410 fi411done412IFS="$save_IFS"413if test "$locale_dir" = FAILED || test "$gettext_dir" = FAILED414then415 echo=echo416else417 TEXTDOMAINDIR=$locale_dir418 export TEXTDOMAINDIR419 TEXTDOMAIN=sharutils420 export TEXTDOMAIN421 echo="$gettext_dir/gettext -s"422fi423touch -am 1231235999 $$.touch >/dev/null 2>&1424if test ! -f 1231235999 && test -f $$.touch; then425 shar_touch=touch426else427 shar_touch=:428 echo429 $echo 'WARNING: not restoring timestamps. Consider getting and'430 $echo "installing GNU \`touch', distributed in GNU File Utilities..."431 echo432fi433rm -f 1231235999 $$.touch434#435if mkdir _sh01426; then436 $echo 'x -' 'creating lock directory'437else438 $echo 'failed to create lock directory'439 exit 1440fi441# ============= MultiSound.d/setdigital.c ==============442if test ! -d 'MultiSound.d'; then443 $echo 'x -' 'creating directory' 'MultiSound.d'444 mkdir 'MultiSound.d'445fi446if test -f 'MultiSound.d/setdigital.c' && test "$first_param" != -c; then447 $echo 'x -' SKIPPING 'MultiSound.d/setdigital.c' '(file already exists)'448else449 $echo 'x -' extracting 'MultiSound.d/setdigital.c' '(text)'450 sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/setdigital.c' &&451/*********************************************************************452X *453X * setdigital.c - sets the DIGITAL1 input for a mixer454X *455X * Copyright (C) 1998 Andrew Veliath456X *457X * This program is free software; you can redistribute it and/or modify458X * it under the terms of the GNU General Public License as published by459X * the Free Software Foundation; either version 2 of the License, or460X * (at your option) any later version.461X *462X * This program is distributed in the hope that it will be useful,463X * but WITHOUT ANY WARRANTY; without even the implied warranty of464X * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the465X * GNU General Public License for more details.466X *467X * You should have received a copy of the GNU General Public License468X * along with this program; if not, write to the Free Software469X * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.470X *471X ********************************************************************/472X473#include <stdio.h>474#include <stdlib.h>475#include <unistd.h>476#include <fcntl.h>477#include <sys/types.h>478#include <sys/stat.h>479#include <sys/ioctl.h>480#include <sys/soundcard.h>481X482int main(int argc, char *argv[])483{484X int fd;485X unsigned long recmask, recsrc;486X487X if (argc != 2) {488X fprintf(stderr, "usage: setdigital <mixer device>\n");489X exit(1);490X }491X492X if ((fd = open(argv[1], O_RDWR)) < 0) {493X perror(argv[1]);494X exit(1);495X }496X497X if (ioctl(fd, SOUND_MIXER_READ_RECMASK, &recmask) < 0) {498X fprintf(stderr, "error: ioctl read recording mask failed\n");499X perror("ioctl");500X close(fd);501X exit(1);502X }503X504X if (!(recmask & SOUND_MASK_DIGITAL1)) {505X fprintf(stderr, "error: cannot find DIGITAL1 device in mixer\n");506X close(fd);507X exit(1);508X }509X510X if (ioctl(fd, SOUND_MIXER_READ_RECSRC, &recsrc) < 0) {511X fprintf(stderr, "error: ioctl read recording source failed\n");512X perror("ioctl");513X close(fd);514X exit(1);515X }516X517X recsrc |= SOUND_MASK_DIGITAL1;518X519X if (ioctl(fd, SOUND_MIXER_WRITE_RECSRC, &recsrc) < 0) {520X fprintf(stderr, "error: ioctl write recording source failed\n");521X perror("ioctl");522X close(fd);523X exit(1);524X }525X526X close(fd);527X528X return 0;529}530SHAR_EOF531 $shar_touch -am 1204092598 'MultiSound.d/setdigital.c' &&532 chmod 0664 'MultiSound.d/setdigital.c' ||533 $echo 'restore of' 'MultiSound.d/setdigital.c' 'failed'534 if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \535 && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then536 md5sum -c << SHAR_EOF >/dev/null 2>&1 \537 || $echo 'MultiSound.d/setdigital.c:' 'MD5 check failed'538e87217fc3e71288102ba41fd81f71ec4 MultiSound.d/setdigital.c539SHAR_EOF540 else541 shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/setdigital.c'`"542 test 2064 -eq "$shar_count" ||543 $echo 'MultiSound.d/setdigital.c:' 'original size' '2064,' 'current size' "$shar_count!"544 fi545fi546# ============= MultiSound.d/pinnaclecfg.c ==============547if test -f 'MultiSound.d/pinnaclecfg.c' && test "$first_param" != -c; then548 $echo 'x -' SKIPPING 'MultiSound.d/pinnaclecfg.c' '(file already exists)'549else550 $echo 'x -' extracting 'MultiSound.d/pinnaclecfg.c' '(text)'551 sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/pinnaclecfg.c' &&552/*********************************************************************553X *554X * pinnaclecfg.c - Pinnacle/Fiji Device Configuration Program555X *556X * This is for NON-PnP mode only. For PnP mode, use isapnptools.557X *558X * This is Linux-specific, and must be run with root permissions.559X *560X * Part of the Turtle Beach MultiSound Sound Card Driver for Linux561X *562X * Copyright (C) 1998 Andrew Veliath563X *564X * This program is free software; you can redistribute it and/or modify565X * it under the terms of the GNU General Public License as published by566X * the Free Software Foundation; either version 2 of the License, or567X * (at your option) any later version.568X *569X * This program is distributed in the hope that it will be useful,570X * but WITHOUT ANY WARRANTY; without even the implied warranty of571X * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the572X * GNU General Public License for more details.573X *574X * You should have received a copy of the GNU General Public License575X * along with this program; if not, write to the Free Software576X * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.577X *578X ********************************************************************/579X580#include <stdio.h>581#include <stdlib.h>582#include <string.h>583#include <errno.h>584#include <unistd.h>585#include <asm/types.h>586#include <sys/io.h>587X588#define IREG_LOGDEVICE 0x07589#define IREG_ACTIVATE 0x30590#define LD_ACTIVATE 0x01591#define LD_DISACTIVATE 0x00592#define IREG_EECONTROL 0x3F593#define IREG_MEMBASEHI 0x40594#define IREG_MEMBASELO 0x41595#define IREG_MEMCONTROL 0x42596#define IREG_MEMRANGEHI 0x43597#define IREG_MEMRANGELO 0x44598#define MEMTYPE_8BIT 0x00599#define MEMTYPE_16BIT 0x02600#define MEMTYPE_RANGE 0x00601#define MEMTYPE_HIADDR 0x01602#define IREG_IO0_BASEHI 0x60603#define IREG_IO0_BASELO 0x61604#define IREG_IO1_BASEHI 0x62605#define IREG_IO1_BASELO 0x63606#define IREG_IRQ_NUMBER 0x70607#define IREG_IRQ_TYPE 0x71608#define IRQTYPE_HIGH 0x02609#define IRQTYPE_LOW 0x00610#define IRQTYPE_LEVEL 0x01611#define IRQTYPE_EDGE 0x00612X613#define HIBYTE(w) ((BYTE)(((WORD)(w) >> 8) & 0xFF))614#define LOBYTE(w) ((BYTE)(w))615#define MAKEWORD(low,hi) ((WORD)(((BYTE)(low))|(((WORD)((BYTE)(hi)))<<8)))616X617typedef __u8 BYTE;618typedef __u16 USHORT;619typedef __u16 WORD;620X621static int config_port = -1;622X623static int msnd_write_cfg(int cfg, int reg, int value)624{625X outb(reg, cfg);626X outb(value, cfg + 1);627X if (value != inb(cfg + 1)) {628X fprintf(stderr, "error: msnd_write_cfg: I/O error\n");629X return -EIO;630X }631X return 0;632}633X634static int msnd_read_cfg(int cfg, int reg)635{636X outb(reg, cfg);637X return inb(cfg + 1);638}639X640static int msnd_write_cfg_io0(int cfg, int num, WORD io)641{642X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))643X return -EIO;644X if (msnd_write_cfg(cfg, IREG_IO0_BASEHI, HIBYTE(io)))645X return -EIO;646X if (msnd_write_cfg(cfg, IREG_IO0_BASELO, LOBYTE(io)))647X return -EIO;648X return 0;649}650X651static int msnd_read_cfg_io0(int cfg, int num, WORD *io)652{653X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))654X return -EIO;655X656X *io = MAKEWORD(msnd_read_cfg(cfg, IREG_IO0_BASELO),657X msnd_read_cfg(cfg, IREG_IO0_BASEHI));658X659X return 0;660}661X662static int msnd_write_cfg_io1(int cfg, int num, WORD io)663{664X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))665X return -EIO;666X if (msnd_write_cfg(cfg, IREG_IO1_BASEHI, HIBYTE(io)))667X return -EIO;668X if (msnd_write_cfg(cfg, IREG_IO1_BASELO, LOBYTE(io)))669X return -EIO;670X return 0;671}672X673static int msnd_read_cfg_io1(int cfg, int num, WORD *io)674{675X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))676X return -EIO;677X678X *io = MAKEWORD(msnd_read_cfg(cfg, IREG_IO1_BASELO),679X msnd_read_cfg(cfg, IREG_IO1_BASEHI));680X681X return 0;682}683X684static int msnd_write_cfg_irq(int cfg, int num, WORD irq)685{686X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))687X return -EIO;688X if (msnd_write_cfg(cfg, IREG_IRQ_NUMBER, LOBYTE(irq)))689X return -EIO;690X if (msnd_write_cfg(cfg, IREG_IRQ_TYPE, IRQTYPE_EDGE))691X return -EIO;692X return 0;693}694X695static int msnd_read_cfg_irq(int cfg, int num, WORD *irq)696{697X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))698X return -EIO;699X700X *irq = msnd_read_cfg(cfg, IREG_IRQ_NUMBER);701X702X return 0;703}704X705static int msnd_write_cfg_mem(int cfg, int num, int mem)706{707X WORD wmem;708X709X mem >>= 8;710X mem &= 0xfff;711X wmem = (WORD)mem;712X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))713X return -EIO;714X if (msnd_write_cfg(cfg, IREG_MEMBASEHI, HIBYTE(wmem)))715X return -EIO;716X if (msnd_write_cfg(cfg, IREG_MEMBASELO, LOBYTE(wmem)))717X return -EIO;718X if (wmem && msnd_write_cfg(cfg, IREG_MEMCONTROL, (MEMTYPE_HIADDR | MEMTYPE_16BIT)))719X return -EIO;720X return 0;721}722X723static int msnd_read_cfg_mem(int cfg, int num, int *mem)724{725X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))726X return -EIO;727X728X *mem = MAKEWORD(msnd_read_cfg(cfg, IREG_MEMBASELO),729X msnd_read_cfg(cfg, IREG_MEMBASEHI));730X *mem <<= 8;731X732X return 0;733}734X735static int msnd_activate_logical(int cfg, int num)736{737X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))738X return -EIO;739X if (msnd_write_cfg(cfg, IREG_ACTIVATE, LD_ACTIVATE))740X return -EIO;741X return 0;742}743X744static int msnd_write_cfg_logical(int cfg, int num, WORD io0, WORD io1, WORD irq, int mem)745{746X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))747X return -EIO;748X if (msnd_write_cfg_io0(cfg, num, io0))749X return -EIO;750X if (msnd_write_cfg_io1(cfg, num, io1))751X return -EIO;752X if (msnd_write_cfg_irq(cfg, num, irq))753X return -EIO;754X if (msnd_write_cfg_mem(cfg, num, mem))755X return -EIO;756X if (msnd_activate_logical(cfg, num))757X return -EIO;758X return 0;759}760X761static int msnd_read_cfg_logical(int cfg, int num, WORD *io0, WORD *io1, WORD *irq, int *mem)762{763X if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num))764X return -EIO;765X if (msnd_read_cfg_io0(cfg, num, io0))766X return -EIO;767X if (msnd_read_cfg_io1(cfg, num, io1))768X return -EIO;769X if (msnd_read_cfg_irq(cfg, num, irq))770X return -EIO;771X if (msnd_read_cfg_mem(cfg, num, mem))772X return -EIO;773X return 0;774}775X776static void usage(void)777{778X fprintf(stderr,779X "\n"780X "pinnaclecfg 1.0\n"781X "\n"782X "usage: pinnaclecfg <config port> [device config]\n"783X "\n"784X "This is for use with the card in NON-PnP mode only.\n"785X "\n"786X "Available devices (not all available for Fiji):\n"787X "\n"788X " Device Description\n"789X " -------------------------------------------------------------------\n"790X " reset Reset all devices (i.e. disable)\n"791X " show Display current device configurations\n"792X "\n"793X " dsp <io> <irq> <mem> Audio device\n"794X " mpu <io> <irq> Internal Kurzweil synth\n"795X " ide <io0> <io1> <irq> On-board IDE controller\n"796X " joystick <io> Joystick port\n"797X "\n");798X exit(1);799}800X801static int cfg_reset(void)802{803X int i;804X805X for (i = 0; i < 4; ++i)806X msnd_write_cfg_logical(config_port, i, 0, 0, 0, 0);807X808X return 0;809}810X811static int cfg_show(void)812{813X int i;814X int count = 0;815X816X for (i = 0; i < 4; ++i) {817X WORD io0, io1, irq;818X int mem;819X msnd_read_cfg_logical(config_port, i, &io0, &io1, &irq, &mem);820X switch (i) {821X case 0:822X if (io0 || irq || mem) {823X printf("dsp 0x%x %d 0x%x\n", io0, irq, mem);824X ++count;825X }826X break;827X case 1:828X if (io0 || irq) {829X printf("mpu 0x%x %d\n", io0, irq);830X ++count;831X }832X break;833X case 2:834X if (io0 || io1 || irq) {835X printf("ide 0x%x 0x%x %d\n", io0, io1, irq);836X ++count;837X }838X break;839X case 3:840X if (io0) {841X printf("joystick 0x%x\n", io0);842X ++count;843X }844X break;845X }846X }847X848X if (count == 0)849X fprintf(stderr, "no devices configured\n");850X851X return 0;852}853X854static int cfg_dsp(int argc, char *argv[])855{856X int io, irq, mem;857X858X if (argc < 3 ||859X sscanf(argv[0], "0x%x", &io) != 1 ||860X sscanf(argv[1], "%d", &irq) != 1 ||861X sscanf(argv[2], "0x%x", &mem) != 1)862X usage();863X864X if (!(io == 0x290 ||865X io == 0x260 ||866X io == 0x250 ||867X io == 0x240 ||868X io == 0x230 ||869X io == 0x220 ||870X io == 0x210 ||871X io == 0x3e0)) {872X fprintf(stderr, "error: io must be one of "873X "210, 220, 230, 240, 250, 260, 290, or 3E0\n");874X usage();875X }876X877X if (!(irq == 5 ||878X irq == 7 ||879X irq == 9 ||880X irq == 10 ||881X irq == 11 ||882X irq == 12)) {883X fprintf(stderr, "error: irq must be one of "884X "5, 7, 9, 10, 11 or 12\n");885X usage();886X }887X888X if (!(mem == 0xb0000 ||889X mem == 0xc8000 ||890X mem == 0xd0000 ||891X mem == 0xd8000 ||892X mem == 0xe0000 ||893X mem == 0xe8000)) {894X fprintf(stderr, "error: mem must be one of "895X "0xb0000, 0xc8000, 0xd0000, 0xd8000, 0xe0000 or 0xe8000\n");896X usage();897X }898X899X return msnd_write_cfg_logical(config_port, 0, io, 0, irq, mem);900}901X902static int cfg_mpu(int argc, char *argv[])903{904X int io, irq;905X906X if (argc < 2 ||907X sscanf(argv[0], "0x%x", &io) != 1 ||908X sscanf(argv[1], "%d", &irq) != 1)909X usage();910X911X return msnd_write_cfg_logical(config_port, 1, io, 0, irq, 0);912}913X914static int cfg_ide(int argc, char *argv[])915{916X int io0, io1, irq;917X918X if (argc < 3 ||919X sscanf(argv[0], "0x%x", &io0) != 1 ||920X sscanf(argv[0], "0x%x", &io1) != 1 ||921X sscanf(argv[1], "%d", &irq) != 1)922X usage();923X924X return msnd_write_cfg_logical(config_port, 2, io0, io1, irq, 0);925}926X927static int cfg_joystick(int argc, char *argv[])928{929X int io;930X931X if (argc < 1 ||932X sscanf(argv[0], "0x%x", &io) != 1)933X usage();934X935X return msnd_write_cfg_logical(config_port, 3, io, 0, 0, 0);936}937X938int main(int argc, char *argv[])939{940X char *device;941X int rv = 0;942X943X --argc; ++argv;944X945X if (argc < 2)946X usage();947X948X sscanf(argv[0], "0x%x", &config_port);949X if (config_port != 0x250 && config_port != 0x260 && config_port != 0x270) {950X fprintf(stderr, "error: <config port> must be 0x250, 0x260 or 0x270\n");951X exit(1);952X }953X if (ioperm(config_port, 2, 1)) {954X perror("ioperm");955X fprintf(stderr, "note: pinnaclecfg must be run as root\n");956X exit(1);957X }958X device = argv[1];959X960X argc -= 2; argv += 2;961X962X if (strcmp(device, "reset") == 0)963X rv = cfg_reset();964X else if (strcmp(device, "show") == 0)965X rv = cfg_show();966X else if (strcmp(device, "dsp") == 0)967X rv = cfg_dsp(argc, argv);968X else if (strcmp(device, "mpu") == 0)969X rv = cfg_mpu(argc, argv);970X else if (strcmp(device, "ide") == 0)971X rv = cfg_ide(argc, argv);972X else if (strcmp(device, "joystick") == 0)973X rv = cfg_joystick(argc, argv);974X else {975X fprintf(stderr, "error: unknown device %s\n", device);976X usage();977X }978X979X if (rv)980X fprintf(stderr, "error: device configuration failed\n");981X982X return 0;983}984SHAR_EOF985 $shar_touch -am 1204092598 'MultiSound.d/pinnaclecfg.c' &&986 chmod 0664 'MultiSound.d/pinnaclecfg.c' ||987 $echo 'restore of' 'MultiSound.d/pinnaclecfg.c' 'failed'988 if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \989 && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then990 md5sum -c << SHAR_EOF >/dev/null 2>&1 \991 || $echo 'MultiSound.d/pinnaclecfg.c:' 'MD5 check failed'992366bdf27f0db767a3c7921d0a6db20fe MultiSound.d/pinnaclecfg.c993SHAR_EOF994 else995 shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/pinnaclecfg.c'`"996 test 10224 -eq "$shar_count" ||997 $echo 'MultiSound.d/pinnaclecfg.c:' 'original size' '10224,' 'current size' "$shar_count!"998 fi999fi1000# ============= MultiSound.d/Makefile ==============1001if test -f 'MultiSound.d/Makefile' && test "$first_param" != -c; then1002 $echo 'x -' SKIPPING 'MultiSound.d/Makefile' '(file already exists)'1003else1004 $echo 'x -' extracting 'MultiSound.d/Makefile' '(text)'1005 sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/Makefile' &&1006CC = gcc1007CFLAGS = -O1008PROGS = setdigital msndreset pinnaclecfg conv1009X1010all: $(PROGS)1011X1012clean:1013X rm -f $(PROGS)1014SHAR_EOF1015 $shar_touch -am 1204092398 'MultiSound.d/Makefile' &&1016 chmod 0664 'MultiSound.d/Makefile' ||1017 $echo 'restore of' 'MultiSound.d/Makefile' 'failed'1018 if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \1019 && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then1020 md5sum -c << SHAR_EOF >/dev/null 2>&1 \1021 || $echo 'MultiSound.d/Makefile:' 'MD5 check failed'102276ca8bb44e3882edcf79c97df6c81845 MultiSound.d/Makefile1023SHAR_EOF1024 else1025 shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/Makefile'`"1026 test 106 -eq "$shar_count" ||1027 $echo 'MultiSound.d/Makefile:' 'original size' '106,' 'current size' "$shar_count!"1028 fi1029fi1030# ============= MultiSound.d/conv.l ==============1031if test -f 'MultiSound.d/conv.l' && test "$first_param" != -c; then1032 $echo 'x -' SKIPPING 'MultiSound.d/conv.l' '(file already exists)'1033else1034 $echo 'x -' extracting 'MultiSound.d/conv.l' '(text)'1035 sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/conv.l' &&1036%%1037[ \n\t,\r]1038\;.*1039DB1040[0-9A-Fa-f]+H { int n; sscanf(yytext, "%xH", &n); printf("%c", n); }1041%%1042int yywrap() { return 1; }1043void main() { yylex(); }1044SHAR_EOF1045 $shar_touch -am 0828231798 'MultiSound.d/conv.l' &&1046 chmod 0664 'MultiSound.d/conv.l' ||1047 $echo 'restore of' 'MultiSound.d/conv.l' 'failed'1048 if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \1049 && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then1050 md5sum -c << SHAR_EOF >/dev/null 2>&1 \1051 || $echo 'MultiSound.d/conv.l:' 'MD5 check failed'1052d2411fc32cd71a00dcdc1f009e858dd2 MultiSound.d/conv.l1053SHAR_EOF1054 else1055 shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/conv.l'`"1056 test 146 -eq "$shar_count" ||1057 $echo 'MultiSound.d/conv.l:' 'original size' '146,' 'current size' "$shar_count!"1058 fi1059fi1060# ============= MultiSound.d/msndreset.c ==============1061if test -f 'MultiSound.d/msndreset.c' && test "$first_param" != -c; then1062 $echo 'x -' SKIPPING 'MultiSound.d/msndreset.c' '(file already exists)'1063else1064 $echo 'x -' extracting 'MultiSound.d/msndreset.c' '(text)'1065 sed 's/^X//' << 'SHAR_EOF' > 'MultiSound.d/msndreset.c' &&1066/*********************************************************************1067X *1068X * msndreset.c - resets the MultiSound card1069X *1070X * Copyright (C) 1998 Andrew Veliath1071X *1072X * This program is free software; you can redistribute it and/or modify1073X * it under the terms of the GNU General Public License as published by1074X * the Free Software Foundation; either version 2 of the License, or1075X * (at your option) any later version.1076X *1077X * This program is distributed in the hope that it will be useful,1078X * but WITHOUT ANY WARRANTY; without even the implied warranty of1079X * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the1080X * GNU General Public License for more details.1081X *1082X * You should have received a copy of the GNU General Public License1083X * along with this program; if not, write to the Free Software1084X * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.1085X *1086X ********************************************************************/1087X1088#include <stdio.h>1089#include <stdlib.h>1090#include <unistd.h>1091#include <fcntl.h>1092#include <sys/types.h>1093#include <sys/stat.h>1094#include <sys/ioctl.h>1095#include <sys/soundcard.h>1096X1097int main(int argc, char *argv[])1098{1099X int fd;1100X1101X if (argc != 2) {1102X fprintf(stderr, "usage: msndreset <mixer device>\n");1103X exit(1);1104X }1105X1106X if ((fd = open(argv[1], O_RDWR)) < 0) {1107X perror(argv[1]);1108X exit(1);1109X }1110X1111X if (ioctl(fd, SOUND_MIXER_PRIVATE1, 0) < 0) {1112X fprintf(stderr, "error: msnd ioctl reset failed\n");1113X perror("ioctl");1114X close(fd);1115X exit(1);1116X }1117X1118X close(fd);1119X1120X return 0;1121}1122SHAR_EOF1123 $shar_touch -am 1204100698 'MultiSound.d/msndreset.c' &&1124 chmod 0664 'MultiSound.d/msndreset.c' ||1125 $echo 'restore of' 'MultiSound.d/msndreset.c' 'failed'1126 if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \1127 && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then1128 md5sum -c << SHAR_EOF >/dev/null 2>&1 \1129 || $echo 'MultiSound.d/msndreset.c:' 'MD5 check failed'1130c52f876521084e8eb25e12e01dcccb8a MultiSound.d/msndreset.c1131SHAR_EOF1132 else1133 shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'MultiSound.d/msndreset.c'`"1134 test 1491 -eq "$shar_count" ||1135 $echo 'MultiSound.d/msndreset.c:' 'original size' '1491,' 'current size' "$shar_count!"1136 fi1137fi1138rm -fr _sh014261139exit 01140