279 lines · plain
1.. SPDX-License-Identifier: GPL-2.02 3==============================4Running nested guests with KVM5==============================6 7A nested guest is the ability to run a guest inside another guest (it8can be KVM-based or a different hypervisor). The straightforward9example is a KVM guest that in turn runs on a KVM guest (the rest of10this document is built on this example)::11 12 .----------------. .----------------.13 | | | |14 | L2 | | L2 |15 | (Nested Guest) | | (Nested Guest) |16 | | | |17 |----------------'--'----------------|18 | |19 | L1 (Guest Hypervisor) |20 | KVM (/dev/kvm) |21 | |22 .------------------------------------------------------.23 | L0 (Host Hypervisor) |24 | KVM (/dev/kvm) |25 |------------------------------------------------------|26 | Hardware (with virtualization extensions) |27 '------------------------------------------------------'28 29Terminology:30 31- L0 – level-0; the bare metal host, running KVM32 33- L1 – level-1 guest; a VM running on L0; also called the "guest34 hypervisor", as it itself is capable of running KVM.35 36- L2 – level-2 guest; a VM running on L1, this is the "nested guest"37 38.. note:: The above diagram is modelled after the x86 architecture;39 s390x, ppc64 and other architectures are likely to have40 a different design for nesting.41 42 For example, s390x always has an LPAR (LogicalPARtition)43 hypervisor running on bare metal, adding another layer and44 resulting in at least four levels in a nested setup — L0 (bare45 metal, running the LPAR hypervisor), L1 (host hypervisor), L246 (guest hypervisor), L3 (nested guest).47 48 This document will stick with the three-level terminology (L0,49 L1, and L2) for all architectures; and will largely focus on50 x86.51 52 53Use Cases54---------55 56There are several scenarios where nested KVM can be useful, to name a57few:58 59- As a developer, you want to test your software on different operating60 systems (OSes). Instead of renting multiple VMs from a Cloud61 Provider, using nested KVM lets you rent a large enough "guest62 hypervisor" (level-1 guest). This in turn allows you to create63 multiple nested guests (level-2 guests), running different OSes, on64 which you can develop and test your software.65 66- Live migration of "guest hypervisors" and their nested guests, for67 load balancing, disaster recovery, etc.68 69- VM image creation tools (e.g. ``virt-install``, etc) often run70 their own VM, and users expect these to work inside a VM.71 72- Some OSes use virtualization internally for security (e.g. to let73 applications run safely in isolation).74 75 76Enabling "nested" (x86)77-----------------------78 79From Linux kernel v4.20 onwards, the ``nested`` KVM parameter is enabled80by default for Intel and AMD. (Though your Linux distribution might81override this default.)82 83In case you are running a Linux kernel older than v4.19, to enable84nesting, set the ``nested`` KVM module parameter to ``Y`` or ``1``. To85persist this setting across reboots, you can add it in a config file, as86shown below:87 881. On the bare metal host (L0), list the kernel modules and ensure that89 the KVM modules::90 91 $ lsmod | grep -i kvm92 kvm_intel 133627 093 kvm 435079 1 kvm_intel94 952. Show information for ``kvm_intel`` module::96 97 $ modinfo kvm_intel | grep -i nested98 parm: nested:bool99 1003. For the nested KVM configuration to persist across reboots, place the101 below in ``/etc/modprobed/kvm_intel.conf`` (create the file if it102 doesn't exist)::103 104 $ cat /etc/modprobe.d/kvm_intel.conf105 options kvm-intel nested=y106 1074. Unload and re-load the KVM Intel module::108 109 $ sudo rmmod kvm-intel110 $ sudo modprobe kvm-intel111 1125. Verify if the ``nested`` parameter for KVM is enabled::113 114 $ cat /sys/module/kvm_intel/parameters/nested115 Y116 117For AMD hosts, the process is the same as above, except that the module118name is ``kvm-amd``.119 120 121Additional nested-related kernel parameters (x86)122-------------------------------------------------123 124If your hardware is sufficiently advanced (Intel Haswell processor or125higher, which has newer hardware virt extensions), the following126additional features will also be enabled by default: "Shadow VMCS127(Virtual Machine Control Structure)", APIC Virtualization on your bare128metal host (L0). Parameters for Intel hosts::129 130 $ cat /sys/module/kvm_intel/parameters/enable_shadow_vmcs131 Y132 133 $ cat /sys/module/kvm_intel/parameters/enable_apicv134 Y135 136 $ cat /sys/module/kvm_intel/parameters/ept137 Y138 139.. note:: If you suspect your L2 (i.e. nested guest) is running slower,140 ensure the above are enabled (particularly141 ``enable_shadow_vmcs`` and ``ept``).142 143 144Starting a nested guest (x86)145-----------------------------146 147Once your bare metal host (L0) is configured for nesting, you should be148able to start an L1 guest with::149 150 $ qemu-kvm -cpu host [...]151 152The above will pass through the host CPU's capabilities as-is to the153guest, or for better live migration compatibility, use a named CPU154model supported by QEMU. e.g.::155 156 $ qemu-kvm -cpu Haswell-noTSX-IBRS,vmx=on157 158then the guest hypervisor will subsequently be capable of running a159nested guest with accelerated KVM.160 161 162Enabling "nested" (s390x)163-------------------------164 1651. On the host hypervisor (L0), enable the ``nested`` parameter on166 s390x::167 168 $ rmmod kvm169 $ modprobe kvm nested=1170 171.. note:: On s390x, the kernel parameter ``hpage`` is mutually exclusive172 with the ``nested`` parameter — i.e. to be able to enable173 ``nested``, the ``hpage`` parameter *must* be disabled.174 1752. The guest hypervisor (L1) must be provided with the ``sie`` CPU176 feature — with QEMU, this can be done by using "host passthrough"177 (via the command-line ``-cpu host``).178 1793. Now the KVM module can be loaded in the L1 (guest hypervisor)::180 181 $ modprobe kvm182 183 184Live migration with nested KVM185------------------------------186 187Migrating an L1 guest, with a *live* nested guest in it, to another188bare metal host, works as of Linux kernel 5.3 and QEMU 4.2.0 for189Intel x86 systems, and even on older versions for s390x.190 191On AMD systems, once an L1 guest has started an L2 guest, the L1 guest192should no longer be migrated or saved (refer to QEMU documentation on193"savevm"/"loadvm") until the L2 guest shuts down. Attempting to migrate194or save-and-load an L1 guest while an L2 guest is running will result in195undefined behavior. You might see a ``kernel BUG!`` entry in ``dmesg``, a196kernel 'oops', or an outright kernel panic. Such a migrated or loaded L1197guest can no longer be considered stable or secure, and must be restarted.198Migrating an L1 guest merely configured to support nesting, while not199actually running L2 guests, is expected to function normally even on AMD200systems but may fail once guests are started.201 202Migrating an L2 guest is always expected to succeed, so all the following203scenarios should work even on AMD systems:204 205- Migrating a nested guest (L2) to another L1 guest on the *same* bare206 metal host.207 208- Migrating a nested guest (L2) to another L1 guest on a *different*209 bare metal host.210 211- Migrating a nested guest (L2) to a bare metal host.212 213Reporting bugs from nested setups214-----------------------------------215 216Debugging "nested" problems can involve sifting through log files across217L0, L1 and L2; this can result in tedious back-n-forth between the bug218reporter and the bug fixer.219 220- Mention that you are in a "nested" setup. If you are running any kind221 of "nesting" at all, say so. Unfortunately, this needs to be called222 out because when reporting bugs, people tend to forget to even223 *mention* that they're using nested virtualization.224 225- Ensure you are actually running KVM on KVM. Sometimes people do not226 have KVM enabled for their guest hypervisor (L1), which results in227 them running with pure emulation or what QEMU calls it as "TCG", but228 they think they're running nested KVM. Thus confusing "nested Virt"229 (which could also mean, QEMU on KVM) with "nested KVM" (KVM on KVM).230 231Information to collect (generic)232~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~233 234The following is not an exhaustive list, but a very good starting point:235 236 - Kernel, libvirt, and QEMU version from L0237 238 - Kernel, libvirt and QEMU version from L1239 240 - QEMU command-line of L1 -- when using libvirt, you'll find it here:241 ``/var/log/libvirt/qemu/instance.log``242 243 - QEMU command-line of L2 -- as above, when using libvirt, get the244 complete libvirt-generated QEMU command-line245 246 - ``cat /sys/cpuinfo`` from L0247 248 - ``cat /sys/cpuinfo`` from L1249 250 - ``lscpu`` from L0251 252 - ``lscpu`` from L1253 254 - Full ``dmesg`` output from L0255 256 - Full ``dmesg`` output from L1257 258x86-specific info to collect259~~~~~~~~~~~~~~~~~~~~~~~~~~~~260 261Both the below commands, ``x86info`` and ``dmidecode``, should be262available on most Linux distributions with the same name:263 264 - Output of: ``x86info -a`` from L0265 266 - Output of: ``x86info -a`` from L1267 268 - Output of: ``dmidecode`` from L0269 270 - Output of: ``dmidecode`` from L1271 272s390x-specific info to collect273~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~274 275Along with the earlier mentioned generic details, the below is276also recommended:277 278 - ``/proc/sysinfo`` from L1; this will also include the info from L0279