brintos

brintos / linux-shallow public Read only

0
0
Text · 4.1 KiB · 44cc24d Raw
164 lines · c
1// SPDX-License-Identifier: GPL-2.0-or-later2/*3 * pata_ns87410.c 	- National Semiconductor 87410 PATA for new ATA layer4 *			  (C) 2006 Red Hat Inc5 */6 7#include <linux/kernel.h>8#include <linux/module.h>9#include <linux/pci.h>10#include <linux/blkdev.h>11#include <linux/delay.h>12#include <scsi/scsi_host.h>13#include <linux/libata.h>14 15#define DRV_NAME "pata_ns87410"16#define DRV_VERSION "0.4.6"17 18/**19 *	ns87410_pre_reset		-	probe begin20 *	@link: ATA link21 *	@deadline: deadline jiffies for the operation22 *23 *	Check enabled ports24 */25 26static int ns87410_pre_reset(struct ata_link *link, unsigned long deadline)27{28	struct ata_port *ap = link->ap;29	struct pci_dev *pdev = to_pci_dev(ap->host->dev);30	static const struct pci_bits ns87410_enable_bits[] = {31		{ 0x43, 1, 0x08, 0x08 },32		{ 0x47, 1, 0x08, 0x08 }33	};34 35	if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no]))36		return -ENOENT;37 38	return ata_sff_prereset(link, deadline);39}40 41/**42 *	ns87410_set_piomode	-	set initial PIO mode data43 *	@ap: ATA interface44 *	@adev: ATA device45 *46 *	Program timing data. This is kept per channel not per device,47 *	and only affects the data port.48 */49 50static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev)51{52	struct pci_dev *pdev = to_pci_dev(ap->host->dev);53	int port = 0x40 + 4 * ap->port_no;54	u8 idetcr, idefr;55	struct ata_timing at;56 57	static const u8 activebits[15] = {58		0, 1, 2, 3, 4,59		5, 5, 6, 6, 6,60		6, 7, 7, 7, 761	};62 63	static const u8 recoverbits[12] = {64		0, 1, 2, 3, 4, 5, 6, 6, 7, 7, 7, 765	};66 67	pci_read_config_byte(pdev, port + 3, &idefr);68 69	if (ata_pio_need_iordy(adev))70		idefr |= 0x04;	/* IORDY enable */71	else72		idefr &= ~0x04;73 74	if (ata_timing_compute(adev, adev->pio_mode, &at, 30303, 1) < 0) {75		dev_err(&pdev->dev, "unknown mode %d\n", adev->pio_mode);76		return;77	}78 79	at.active = clamp_val(at.active, 2, 16) - 2;80	at.setup = clamp_val(at.setup, 1, 4) - 1;81	at.recover = clamp_val(at.recover, 1, 12) - 1;82 83	idetcr = (at.setup << 6) | (recoverbits[at.recover] << 3) | activebits[at.active];84 85	pci_write_config_byte(pdev, port, idetcr);86	pci_write_config_byte(pdev, port + 3, idefr);87	/* We use ap->private_data as a pointer to the device currently88	   loaded for timing */89	ap->private_data = adev;90}91 92/**93 *	ns87410_qc_issue	-	command issue94 *	@qc: command pending95 *96 *	Called when the libata layer is about to issue a command. We wrap97 *	this interface so that we can load the correct ATA timings if98 *	necessary.99 */100 101static unsigned int ns87410_qc_issue(struct ata_queued_cmd *qc)102{103	struct ata_port *ap = qc->ap;104	struct ata_device *adev = qc->dev;105 106	/* If modes have been configured and the channel data is not loaded107	   then load it. We have to check if pio_mode is set as the core code108	   does not set adev->pio_mode to XFER_PIO_0 while probing as would be109	   logical */110 111	if (adev->pio_mode && adev != ap->private_data)112		ns87410_set_piomode(ap, adev);113 114	return ata_sff_qc_issue(qc);115}116 117static const struct scsi_host_template ns87410_sht = {118	ATA_PIO_SHT(DRV_NAME),119};120 121static struct ata_port_operations ns87410_port_ops = {122	.inherits	= &ata_sff_port_ops,123	.qc_issue	= ns87410_qc_issue,124	.cable_detect	= ata_cable_40wire,125	.set_piomode	= ns87410_set_piomode,126	.prereset	= ns87410_pre_reset,127};128 129static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id)130{131	static const struct ata_port_info info = {132		.flags = ATA_FLAG_SLAVE_POSS,133		.pio_mask = ATA_PIO3,134		.port_ops = &ns87410_port_ops135	};136	const struct ata_port_info *ppi[] = { &info, NULL };137	return ata_pci_sff_init_one(dev, ppi, &ns87410_sht, NULL, 0);138}139 140static const struct pci_device_id ns87410[] = {141	{ PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_87410), },142 143	{ },144};145 146static struct pci_driver ns87410_pci_driver = {147	.name 		= DRV_NAME,148	.id_table	= ns87410,149	.probe 		= ns87410_init_one,150	.remove		= ata_pci_remove_one,151#ifdef CONFIG_PM_SLEEP152	.suspend	= ata_pci_device_suspend,153	.resume		= ata_pci_device_resume,154#endif155};156 157module_pci_driver(ns87410_pci_driver);158 159MODULE_AUTHOR("Alan Cox");160MODULE_DESCRIPTION("low-level driver for Nat Semi 87410");161MODULE_LICENSE("GPL");162MODULE_DEVICE_TABLE(pci, ns87410);163MODULE_VERSION(DRV_VERSION);164