brintos

brintos / linux-shallow public Read only

0
0
Text · 11.3 KiB · fcd70e0 Raw
377 lines · c
1// SPDX-License-Identifier: GPL-2.0-only2/* drivers/atm/idt77105.c - IDT77105 (PHY) driver */3 4/* Written 1999 by Greg Banks, NEC Australia <gnb@linuxfan.com>. Based on suni.c */5 6 7#include <linux/module.h>8#include <linux/kernel.h>9#include <linux/mm.h>10#include <linux/errno.h>11#include <linux/atmdev.h>12#include <linux/sonet.h>13#include <linux/delay.h>14#include <linux/timer.h>15#include <linux/init.h>16#include <linux/capability.h>17#include <linux/atm_idt77105.h>18#include <linux/spinlock.h>19#include <linux/slab.h>20#include <asm/param.h>21#include <linux/uaccess.h>22 23#include "idt77105.h"24 25#undef GENERAL_DEBUG26 27#ifdef GENERAL_DEBUG28#define DPRINTK(format,args...) printk(KERN_DEBUG format,##args)29#else30#define DPRINTK(format,args...)31#endif32 33 34struct idt77105_priv {35	struct idt77105_stats stats;    /* link diagnostics */36	struct atm_dev *dev;		/* device back-pointer */37	struct idt77105_priv *next;38        int loop_mode;39        unsigned char old_mcr;          /* storage of MCR reg while signal lost */40};41 42static DEFINE_SPINLOCK(idt77105_priv_lock);43 44#define PRIV(dev) ((struct idt77105_priv *) dev->phy_data)45 46#define PUT(val,reg) dev->ops->phy_put(dev,val,IDT77105_##reg)47#define GET(reg) dev->ops->phy_get(dev,IDT77105_##reg)48 49static void idt77105_stats_timer_func(struct timer_list *);50static void idt77105_restart_timer_func(struct timer_list *);51 52 53static DEFINE_TIMER(stats_timer, idt77105_stats_timer_func);54static DEFINE_TIMER(restart_timer, idt77105_restart_timer_func);55static int start_timer = 1;56static struct idt77105_priv *idt77105_all = NULL;57 58/*59 * Retrieve the value of one of the IDT77105's counters.60 * `counter' is one of the IDT77105_CTRSEL_* constants.61 */62static u16 get_counter(struct atm_dev *dev, int counter)63{64        u16 val;65        66        /* write the counter bit into PHY register 6 */67        PUT(counter, CTRSEL);68        /* read the low 8 bits from register 4 */69        val = GET(CTRLO);70        /* read the high 8 bits from register 5 */71        val |= GET(CTRHI)<<8;72        73        return val;74}75 76/*77 * Timer function called every second to gather statistics78 * from the 77105. This is done because the h/w registers79 * will overflow if not read at least once per second. The80 * kernel's stats are much higher precision. Also, having81 * a separate copy of the stats allows implementation of82 * an ioctl which gathers the stats *without* zero'ing them.83 */84static void idt77105_stats_timer_func(struct timer_list *unused)85{86	struct idt77105_priv *walk;87	struct atm_dev *dev;88	struct idt77105_stats *stats;89 90        DPRINTK("IDT77105 gathering statistics\n");91	for (walk = idt77105_all; walk; walk = walk->next) {92		dev = walk->dev;93                94		stats = &walk->stats;95                stats->symbol_errors += get_counter(dev, IDT77105_CTRSEL_SEC);96                stats->tx_cells += get_counter(dev, IDT77105_CTRSEL_TCC);97                stats->rx_cells += get_counter(dev, IDT77105_CTRSEL_RCC);98                stats->rx_hec_errors += get_counter(dev, IDT77105_CTRSEL_RHEC);99	}100        if (!start_timer) mod_timer(&stats_timer,jiffies+IDT77105_STATS_TIMER_PERIOD);101}102 103 104/*105 * A separate timer func which handles restarting PHY chips which106 * have had the cable re-inserted after being pulled out. This is107 * done by polling the Good Signal Bit in the Interrupt Status108 * register every 5 seconds. The other technique (checking Good109 * Signal Bit in the interrupt handler) cannot be used because PHY110 * interrupts need to be disabled when the cable is pulled out111 * to avoid lots of spurious cell error interrupts.112 */113static void idt77105_restart_timer_func(struct timer_list *unused)114{115	struct idt77105_priv *walk;116	struct atm_dev *dev;117        unsigned char istat;118 119        DPRINTK("IDT77105 checking for cable re-insertion\n");120	for (walk = idt77105_all; walk; walk = walk->next) {121		dev = walk->dev;122                123                if (dev->signal != ATM_PHY_SIG_LOST)124                    continue;125                    126                istat = GET(ISTAT); /* side effect: clears all interrupt status bits */127                if (istat & IDT77105_ISTAT_GOODSIG) {128                    /* Found signal again */129                    atm_dev_signal_change(dev, ATM_PHY_SIG_FOUND);130	            printk(KERN_NOTICE "%s(itf %d): signal detected again\n",131                        dev->type,dev->number);132                    /* flush the receive FIFO */133                    PUT( GET(DIAG) | IDT77105_DIAG_RFLUSH, DIAG);134                    /* re-enable interrupts */135	            PUT( walk->old_mcr ,MCR);136                }137	}138        if (!start_timer) mod_timer(&restart_timer,jiffies+IDT77105_RESTART_TIMER_PERIOD);139}140 141 142static int fetch_stats(struct atm_dev *dev,struct idt77105_stats __user *arg,int zero)143{144	unsigned long flags;145	struct idt77105_stats stats;146 147	spin_lock_irqsave(&idt77105_priv_lock, flags);148	memcpy(&stats, &PRIV(dev)->stats, sizeof(struct idt77105_stats));149	if (zero)150		memset(&PRIV(dev)->stats, 0, sizeof(struct idt77105_stats));151	spin_unlock_irqrestore(&idt77105_priv_lock, flags);152	if (arg == NULL)153		return 0;154	return copy_to_user(arg, &stats,155		    sizeof(struct idt77105_stats)) ? -EFAULT : 0;156}157 158 159static int set_loopback(struct atm_dev *dev,int mode)160{161	int diag;162 163	diag = GET(DIAG) & ~IDT77105_DIAG_LCMASK;164	switch (mode) {165		case ATM_LM_NONE:166			break;167		case ATM_LM_LOC_ATM:168			diag |= IDT77105_DIAG_LC_PHY_LOOPBACK;169			break;170		case ATM_LM_RMT_ATM:171			diag |= IDT77105_DIAG_LC_LINE_LOOPBACK;172			break;173		default:174			return -EINVAL;175	}176	PUT(diag,DIAG);177	printk(KERN_NOTICE "%s(%d) Loopback mode is: %s\n", dev->type,178	    dev->number,179	    (mode == ATM_LM_NONE ? "NONE" : 180	      (mode == ATM_LM_LOC_ATM ? "DIAG (local)" :181		(mode == IDT77105_DIAG_LC_LINE_LOOPBACK ? "LOOP (remote)" :182		  "unknown")))183		    );184	PRIV(dev)->loop_mode = mode;185	return 0;186}187 188 189static int idt77105_ioctl(struct atm_dev *dev,unsigned int cmd,void __user *arg)190{191        printk(KERN_NOTICE "%s(%d) idt77105_ioctl() called\n",dev->type,dev->number);192	switch (cmd) {193		case IDT77105_GETSTATZ:194			if (!capable(CAP_NET_ADMIN)) return -EPERM;195			fallthrough;196		case IDT77105_GETSTAT:197			return fetch_stats(dev, arg, cmd == IDT77105_GETSTATZ);198		case ATM_SETLOOP:199			return set_loopback(dev,(int)(unsigned long) arg);200		case ATM_GETLOOP:201			return put_user(PRIV(dev)->loop_mode,(int __user *)arg) ?202			    -EFAULT : 0;203		case ATM_QUERYLOOP:204			return put_user(ATM_LM_LOC_ATM | ATM_LM_RMT_ATM,205			    (int __user *) arg) ? -EFAULT : 0;206		default:207			return -ENOIOCTLCMD;208	}209}210 211 212 213static void idt77105_int(struct atm_dev *dev)214{215        unsigned char istat;216        217        istat = GET(ISTAT); /* side effect: clears all interrupt status bits */218     219        DPRINTK("IDT77105 generated an interrupt, istat=%02x\n", (unsigned)istat);220                221        if (istat & IDT77105_ISTAT_RSCC) {222            /* Rx Signal Condition Change - line went up or down */223            if (istat & IDT77105_ISTAT_GOODSIG) {   /* signal detected again */224                /* This should not happen (restart timer does it) but JIC */225		atm_dev_signal_change(dev, ATM_PHY_SIG_FOUND);226            } else {    /* signal lost */227                /*228                 * Disable interrupts and stop all transmission and229                 * reception - the restart timer will restore these.230                 */231                PRIV(dev)->old_mcr = GET(MCR);232	        PUT(233                    (PRIV(dev)->old_mcr|234                    IDT77105_MCR_DREC|235                    IDT77105_MCR_DRIC|236                    IDT77105_MCR_HALTTX237                    ) & ~IDT77105_MCR_EIP, MCR);238		atm_dev_signal_change(dev, ATM_PHY_SIG_LOST);239	        printk(KERN_NOTICE "%s(itf %d): signal lost\n",240                    dev->type,dev->number);241            }242        }243        244        if (istat & IDT77105_ISTAT_RFO) {245            /* Rx FIFO Overrun -- perform a FIFO flush */246            PUT( GET(DIAG) | IDT77105_DIAG_RFLUSH, DIAG);247	    printk(KERN_NOTICE "%s(itf %d): receive FIFO overrun\n",248                dev->type,dev->number);249        }250#ifdef GENERAL_DEBUG251        if (istat & (IDT77105_ISTAT_HECERR | IDT77105_ISTAT_SCR |252                     IDT77105_ISTAT_RSE)) {253            /* normally don't care - just report in stats */254	    printk(KERN_NOTICE "%s(itf %d): received cell with error\n",255                dev->type,dev->number);256        }257#endif258}259 260 261static int idt77105_start(struct atm_dev *dev)262{263	unsigned long flags;264 265	if (!(dev->phy_data = kmalloc(sizeof(struct idt77105_priv),GFP_KERNEL)))266		return -ENOMEM;267	PRIV(dev)->dev = dev;268	spin_lock_irqsave(&idt77105_priv_lock, flags);269	PRIV(dev)->next = idt77105_all;270	idt77105_all = PRIV(dev);271	spin_unlock_irqrestore(&idt77105_priv_lock, flags);272	memset(&PRIV(dev)->stats,0,sizeof(struct idt77105_stats));273        274        /* initialise dev->signal from Good Signal Bit */275	atm_dev_signal_change(dev,276		GET(ISTAT) & IDT77105_ISTAT_GOODSIG ?277		ATM_PHY_SIG_FOUND : ATM_PHY_SIG_LOST);278	if (dev->signal == ATM_PHY_SIG_LOST)279		printk(KERN_WARNING "%s(itf %d): no signal\n",dev->type,280		    dev->number);281 282        /* initialise loop mode from hardware */283        switch ( GET(DIAG) & IDT77105_DIAG_LCMASK ) {284        case IDT77105_DIAG_LC_NORMAL:285            PRIV(dev)->loop_mode = ATM_LM_NONE;286            break;287        case IDT77105_DIAG_LC_PHY_LOOPBACK:288            PRIV(dev)->loop_mode = ATM_LM_LOC_ATM;289            break;290        case IDT77105_DIAG_LC_LINE_LOOPBACK:291            PRIV(dev)->loop_mode = ATM_LM_RMT_ATM;292            break;293        }294        295        /* enable interrupts, e.g. on loss of signal */296        PRIV(dev)->old_mcr = GET(MCR);297        if (dev->signal == ATM_PHY_SIG_FOUND) {298            PRIV(dev)->old_mcr |= IDT77105_MCR_EIP;299	    PUT(PRIV(dev)->old_mcr, MCR);300        }301 302                    303	idt77105_stats_timer_func(0); /* clear 77105 counters */304	(void) fetch_stats(dev,NULL,1); /* clear kernel counters */305        306	spin_lock_irqsave(&idt77105_priv_lock, flags);307	if (start_timer) {308		start_timer = 0;309                310		stats_timer.expires = jiffies+IDT77105_STATS_TIMER_PERIOD;311		add_timer(&stats_timer);312                313		restart_timer.expires = jiffies+IDT77105_RESTART_TIMER_PERIOD;314		add_timer(&restart_timer);315	}316	spin_unlock_irqrestore(&idt77105_priv_lock, flags);317	return 0;318}319 320 321static int idt77105_stop(struct atm_dev *dev)322{323	struct idt77105_priv *walk, *prev;324 325        DPRINTK("%s(itf %d): stopping IDT77105\n",dev->type,dev->number);326        327        /* disable interrupts */328	PUT( GET(MCR) & ~IDT77105_MCR_EIP, MCR );329        330        /* detach private struct from atm_dev & free */331	for (prev = NULL, walk = idt77105_all ;332             walk != NULL;333             prev = walk, walk = walk->next) {334            if (walk->dev == dev) {335                if (prev != NULL)336                    prev->next = walk->next;337                else338                    idt77105_all = walk->next;339	        dev->phy = NULL;340                dev->phy_data = NULL;341                kfree(walk);342                break;343            }344        }345 346	return 0;347}348 349 350static const struct atmphy_ops idt77105_ops = {351	.start = 	idt77105_start,352	.ioctl =	idt77105_ioctl,353	.interrupt =	idt77105_int,354	.stop =		idt77105_stop,355};356 357 358int idt77105_init(struct atm_dev *dev)359{360	dev->phy = &idt77105_ops;361	return 0;362}363 364EXPORT_SYMBOL(idt77105_init);365 366static void __exit idt77105_exit(void)367{368	/* turn off timers */369	del_timer_sync(&stats_timer);370	del_timer_sync(&restart_timer);371}372 373module_exit(idt77105_exit);374 375MODULE_DESCRIPTION("IDT77105 PHY driver");376MODULE_LICENSE("GPL");377