48 lines · plain
1Module options2--------------3 4The mwave module takes the following options. Note that these options5are not saved by the BIOS and so do not persist after unload and reload.6 7 mwave_debug=value, where value is bitwise OR of trace flags:8 0x0001 mwavedd api tracing9 0x0002 smapi api tracing10 0x0004 3780i tracing11 0x0008 tp3780i tracing12 13 Tracing only occurs if the driver has been compiled with the14 MW_TRACE macro #defined (i.e. let ccflags-y := -DMW_TRACE15 in the Makefile).16 17 mwave_3780i_irq=5/7/10/11/1518 If the dsp irq has not been setup and stored in bios by the 19 thinkpad configuration utility then this parameter allows the20 irq used by the dsp to be configured.21 22 mwave_3780i_io=0x130/0x350/0x0070/0xDB023 If the dsp io range has not been setup and stored in bios by the 24 thinkpad configuration utility then this parameter allows the25 io range used by the dsp to be configured.26 27 mwave_uart_irq=3/428 If the mwave's uart irq has not been setup and stored in bios by the 29 thinkpad configuration utility then this parameter allows the30 irq used by the mwave uart to be configured.31 32 mwave_uart_io=0x3f8/0x2f8/0x3E8/0x2E833 If the uart io range has not been setup and stored in bios by the 34 thinkpad configuration utility then this parameter allows the35 io range used by the mwave uart to be configured.36 37Example to enable the 3780i DSP using ttyS1 resources:38 39 insmod mwave mwave_3780i_irq=10 mwave_3780i_io=0x0130 mwave_uart_irq=3 mwave_uart_io=0x2f840 41Accessing the driver42--------------------43 44You must also create a node for the driver:45 mkdir -p /dev/modems46 mknod --mode=660 /dev/modems/mwave c 10 21947 48