brintos

brintos / linux-shallow public Read only

0
0
Text · 6.8 KiB · 991732c Raw
250 lines · c
1// SPDX-License-Identifier: GPL-2.0-or-later2/*3 * Copyright (C) 2019 Renesas Electronics Corporation4 * Copyright (C) 2016 Laurent Pinchart <laurent.pinchart@ideasonboard.com>5 */6 7#include <linux/gpio/consumer.h>8#include <linux/media-bus-format.h>9#include <linux/module.h>10#include <linux/of.h>11#include <linux/of_graph.h>12#include <linux/platform_device.h>13#include <linux/regulator/consumer.h>14 15#include <drm/drm_atomic_helper.h>16#include <drm/drm_bridge.h>17#include <drm/drm_of.h>18#include <drm/drm_panel.h>19 20struct lvds_codec {21	struct device *dev;22	struct drm_bridge bridge;23	struct drm_bridge *panel_bridge;24	struct drm_bridge_timings timings;25	struct regulator *vcc;26	struct gpio_desc *powerdown_gpio;27	u32 connector_type;28	unsigned int bus_format;29};30 31static inline struct lvds_codec *to_lvds_codec(struct drm_bridge *bridge)32{33	return container_of(bridge, struct lvds_codec, bridge);34}35 36static int lvds_codec_attach(struct drm_bridge *bridge,37			     enum drm_bridge_attach_flags flags)38{39	struct lvds_codec *lvds_codec = to_lvds_codec(bridge);40 41	return drm_bridge_attach(bridge->encoder, lvds_codec->panel_bridge,42				 bridge, flags);43}44 45static void lvds_codec_enable(struct drm_bridge *bridge)46{47	struct lvds_codec *lvds_codec = to_lvds_codec(bridge);48	int ret;49 50	ret = regulator_enable(lvds_codec->vcc);51	if (ret) {52		dev_err(lvds_codec->dev,53			"Failed to enable regulator \"vcc\": %d\n", ret);54		return;55	}56 57	if (lvds_codec->powerdown_gpio)58		gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 0);59}60 61static void lvds_codec_disable(struct drm_bridge *bridge)62{63	struct lvds_codec *lvds_codec = to_lvds_codec(bridge);64	int ret;65 66	if (lvds_codec->powerdown_gpio)67		gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 1);68 69	ret = regulator_disable(lvds_codec->vcc);70	if (ret)71		dev_err(lvds_codec->dev,72			"Failed to disable regulator \"vcc\": %d\n", ret);73}74 75#define MAX_INPUT_SEL_FORMATS 176static u32 *77lvds_codec_atomic_get_input_bus_fmts(struct drm_bridge *bridge,78				     struct drm_bridge_state *bridge_state,79				     struct drm_crtc_state *crtc_state,80				     struct drm_connector_state *conn_state,81				     u32 output_fmt,82				     unsigned int *num_input_fmts)83{84	struct lvds_codec *lvds_codec = to_lvds_codec(bridge);85	u32 *input_fmts;86 87	*num_input_fmts = 0;88 89	input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts),90			     GFP_KERNEL);91	if (!input_fmts)92		return NULL;93 94	input_fmts[0] = lvds_codec->bus_format;95	*num_input_fmts = MAX_INPUT_SEL_FORMATS;96 97	return input_fmts;98}99 100static const struct drm_bridge_funcs funcs = {101	.attach = lvds_codec_attach,102	.enable = lvds_codec_enable,103	.disable = lvds_codec_disable,104	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,105	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,106	.atomic_reset = drm_atomic_helper_bridge_reset,107	.atomic_get_input_bus_fmts = lvds_codec_atomic_get_input_bus_fmts,108};109 110static int lvds_codec_probe(struct platform_device *pdev)111{112	struct device *dev = &pdev->dev;113	struct device_node *panel_node;114	struct device_node *bus_node;115	struct drm_panel *panel;116	struct lvds_codec *lvds_codec;117	u32 val;118	int ret;119 120	lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL);121	if (!lvds_codec)122		return -ENOMEM;123 124	lvds_codec->dev = &pdev->dev;125	lvds_codec->connector_type = (uintptr_t)of_device_get_match_data(dev);126 127	lvds_codec->vcc = devm_regulator_get(lvds_codec->dev, "power");128	if (IS_ERR(lvds_codec->vcc))129		return dev_err_probe(dev, PTR_ERR(lvds_codec->vcc),130				     "Unable to get \"vcc\" supply\n");131 132	lvds_codec->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown",133							     GPIOD_OUT_HIGH);134	if (IS_ERR(lvds_codec->powerdown_gpio))135		return dev_err_probe(dev, PTR_ERR(lvds_codec->powerdown_gpio),136				     "powerdown GPIO failure\n");137 138	/* Locate the panel DT node. */139	panel_node = of_graph_get_remote_node(dev->of_node, 1, 0);140	if (!panel_node) {141		dev_dbg(dev, "panel DT node not found\n");142		return -ENXIO;143	}144 145	panel = of_drm_find_panel(panel_node);146	of_node_put(panel_node);147	if (IS_ERR(panel)) {148		dev_dbg(dev, "panel not found, deferring probe\n");149		return PTR_ERR(panel);150	}151 152	lvds_codec->panel_bridge =153		devm_drm_panel_bridge_add_typed(dev, panel,154						lvds_codec->connector_type);155	if (IS_ERR(lvds_codec->panel_bridge))156		return PTR_ERR(lvds_codec->panel_bridge);157 158	lvds_codec->bridge.funcs = &funcs;159 160	/*161	 * Decoder input LVDS format is a property of the decoder chip or even162	 * its strapping. Handle data-mapping the same way lvds-panel does. In163	 * case data-mapping is not present, do nothing, since there are still164	 * legacy bindings which do not specify this property.165	 */166	if (lvds_codec->connector_type != DRM_MODE_CONNECTOR_LVDS) {167		bus_node = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0);168		if (!bus_node) {169			dev_dbg(dev, "bus DT node not found\n");170			return -ENXIO;171		}172 173		ret = drm_of_lvds_get_data_mapping(bus_node);174		of_node_put(bus_node);175		if (ret == -ENODEV) {176			dev_warn(dev, "missing 'data-mapping' DT property\n");177		} else if (ret < 0) {178			dev_err(dev, "invalid 'data-mapping' DT property\n");179			return ret;180		} else {181			lvds_codec->bus_format = ret;182		}183	} else {184		lvds_codec->bus_format = MEDIA_BUS_FMT_RGB888_1X24;185	}186 187	/*188	 * Encoder might sample data on different clock edge than the display,189	 * for example OnSemi FIN3385 has a dedicated strapping pin to select190	 * the sampling edge.191	 */192	if (lvds_codec->connector_type == DRM_MODE_CONNECTOR_LVDS &&193	    !of_property_read_u32(dev->of_node, "pclk-sample", &val)) {194		lvds_codec->timings.input_bus_flags = val ?195			DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE :196			DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE;197	}198 199	/*200	 * The panel_bridge bridge is attached to the panel's of_node,201	 * but we need a bridge attached to our of_node for our user202	 * to look up.203	 */204	lvds_codec->bridge.of_node = dev->of_node;205	lvds_codec->bridge.timings = &lvds_codec->timings;206	drm_bridge_add(&lvds_codec->bridge);207 208	platform_set_drvdata(pdev, lvds_codec);209 210	return 0;211}212 213static void lvds_codec_remove(struct platform_device *pdev)214{215	struct lvds_codec *lvds_codec = platform_get_drvdata(pdev);216 217	drm_bridge_remove(&lvds_codec->bridge);218}219 220static const struct of_device_id lvds_codec_match[] = {221	{222		.compatible = "lvds-decoder",223		.data = (void *)DRM_MODE_CONNECTOR_DPI,224	},225	{226		.compatible = "lvds-encoder",227		.data = (void *)DRM_MODE_CONNECTOR_LVDS,228	},229	{230		.compatible = "thine,thc63lvdm83d",231		.data = (void *)DRM_MODE_CONNECTOR_LVDS,232	},233	{},234};235MODULE_DEVICE_TABLE(of, lvds_codec_match);236 237static struct platform_driver lvds_codec_driver = {238	.probe	= lvds_codec_probe,239	.remove_new = lvds_codec_remove,240	.driver		= {241		.name		= "lvds-codec",242		.of_match_table	= lvds_codec_match,243	},244};245module_platform_driver(lvds_codec_driver);246 247MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");248MODULE_DESCRIPTION("LVDS encoders and decoders");249MODULE_LICENSE("GPL");250