brintos

brintos / linux-shallow public Read only

0
0
Text · 6.8 KiB · acce210 Raw
279 lines · c
1// SPDX-License-Identifier: GPL-2.0-only2/*3 * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>4 * Parts of this file were based on sources as follows:5 *6 * Copyright (C) 2006-2008 Intel Corporation7 * Copyright (C) 2007 Amos Lee <amos_lee@storlinksemi.com>8 * Copyright (C) 2007 Dave Airlie <airlied@linux.ie>9 * Copyright (C) 2011 Texas Instruments10 * Copyright (C) 2017 Eric Anholt11 */12 13/**14 * DOC: Faraday TV Encoder TVE200 DRM Driver15 *16 * The Faraday TV Encoder TVE200 is also known as the Gemini TV Interface17 * Controller (TVC) and is found in the Gemini Chipset from Storlink18 * Semiconductor (later Storm Semiconductor, later Cortina Systems)19 * but also in the Grain Media GM8180 chipset. On the Gemini the module20 * is connected to 8 data lines and a single clock line, comprising an21 * 8-bit BT.656 interface.22 *23 * This is a very basic YUV display driver. The datasheet specifies that24 * it supports the ITU BT.656 standard. It requires a 27 MHz clock which is25 * the hallmark of any TV encoder supporting both PAL and NTSC.26 *27 * This driver exposes a standard KMS interface for this TV encoder.28 */29 30#include <linux/clk.h>31#include <linux/dma-buf.h>32#include <linux/irq.h>33#include <linux/io.h>34#include <linux/module.h>35#include <linux/of.h>36#include <linux/platform_device.h>37#include <linux/shmem_fs.h>38#include <linux/slab.h>39 40#include <drm/drm_atomic_helper.h>41#include <drm/drm_bridge.h>42#include <drm/drm_drv.h>43#include <drm/drm_fbdev_dma.h>44#include <drm/drm_gem_dma_helper.h>45#include <drm/drm_gem_framebuffer_helper.h>46#include <drm/drm_module.h>47#include <drm/drm_of.h>48#include <drm/drm_panel.h>49#include <drm/drm_probe_helper.h>50#include <drm/drm_vblank.h>51 52#include "tve200_drm.h"53 54#define DRIVER_DESC      "DRM module for Faraday TVE200"55 56static const struct drm_mode_config_funcs mode_config_funcs = {57	.fb_create = drm_gem_fb_create,58	.atomic_check = drm_atomic_helper_check,59	.atomic_commit = drm_atomic_helper_commit,60};61 62static int tve200_modeset_init(struct drm_device *dev)63{64	struct drm_mode_config *mode_config;65	struct tve200_drm_dev_private *priv = dev->dev_private;66	struct drm_panel *panel;67	struct drm_bridge *bridge;68	int ret;69 70	drm_mode_config_init(dev);71	mode_config = &dev->mode_config;72	mode_config->funcs = &mode_config_funcs;73	mode_config->min_width = 352;74	mode_config->max_width = 720;75	mode_config->min_height = 240;76	mode_config->max_height = 576;77 78	ret = drm_of_find_panel_or_bridge(dev->dev->of_node,79					  0, 0, &panel, &bridge);80	if (ret && ret != -ENODEV)81		return ret;82	if (panel) {83		bridge = drm_panel_bridge_add_typed(panel,84						    DRM_MODE_CONNECTOR_Unknown);85		if (IS_ERR(bridge)) {86			ret = PTR_ERR(bridge);87			goto out_bridge;88		}89	} else {90		/*91		 * TODO: when we are using a different bridge than a panel92		 * (such as a dumb VGA connector) we need to devise a different93		 * method to get the connector out of the bridge.94		 */95		dev_err(dev->dev, "the bridge is not a panel\n");96		ret = -EINVAL;97		goto out_bridge;98	}99 100	ret = tve200_display_init(dev);101	if (ret) {102		dev_err(dev->dev, "failed to init display\n");103		goto out_bridge;104	}105 106	ret = drm_simple_display_pipe_attach_bridge(&priv->pipe,107						    bridge);108	if (ret) {109		dev_err(dev->dev, "failed to attach bridge\n");110		goto out_bridge;111	}112 113	priv->panel = panel;114	priv->connector = drm_panel_bridge_connector(bridge);115	priv->bridge = bridge;116 117	dev_info(dev->dev, "attached to panel %s\n",118		 dev_name(panel->dev));119 120	ret = drm_vblank_init(dev, 1);121	if (ret) {122		dev_err(dev->dev, "failed to init vblank\n");123		goto out_bridge;124	}125 126	drm_mode_config_reset(dev);127	drm_kms_helper_poll_init(dev);128 129	goto finish;130 131out_bridge:132	if (panel)133		drm_panel_bridge_remove(bridge);134	drm_mode_config_cleanup(dev);135finish:136	return ret;137}138 139DEFINE_DRM_GEM_DMA_FOPS(drm_fops);140 141static const struct drm_driver tve200_drm_driver = {142	.driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_ATOMIC,143	.ioctls = NULL,144	.fops = &drm_fops,145	.name = "tve200",146	.desc = DRIVER_DESC,147	.date = "20170703",148	.major = 1,149	.minor = 0,150	.patchlevel = 0,151	DRM_GEM_DMA_DRIVER_OPS,152};153 154static int tve200_probe(struct platform_device *pdev)155{156	struct device *dev = &pdev->dev;157	struct tve200_drm_dev_private *priv;158	struct drm_device *drm;159	int irq;160	int ret;161 162	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);163	if (!priv)164		return -ENOMEM;165 166	drm = drm_dev_alloc(&tve200_drm_driver, dev);167	if (IS_ERR(drm))168		return PTR_ERR(drm);169	platform_set_drvdata(pdev, drm);170	priv->drm = drm;171	drm->dev_private = priv;172 173	/* Clock the silicon so we can access the registers */174	priv->pclk = devm_clk_get(dev, "PCLK");175	if (IS_ERR(priv->pclk)) {176		dev_err(dev, "unable to get PCLK\n");177		ret = PTR_ERR(priv->pclk);178		goto dev_unref;179	}180	ret = clk_prepare_enable(priv->pclk);181	if (ret) {182		dev_err(dev, "failed to enable PCLK\n");183		goto dev_unref;184	}185 186	/* This clock is for the pixels (27MHz) */187	priv->clk = devm_clk_get(dev, "TVE");188	if (IS_ERR(priv->clk)) {189		dev_err(dev, "unable to get TVE clock\n");190		ret = PTR_ERR(priv->clk);191		goto clk_disable;192	}193 194	priv->regs = devm_platform_ioremap_resource(pdev, 0);195	if (IS_ERR(priv->regs)) {196		dev_err(dev, "%s failed mmio\n", __func__);197		ret = -EINVAL;198		goto clk_disable;199	}200 201	irq = platform_get_irq(pdev, 0);202	if (irq < 0) {203		ret = irq;204		goto clk_disable;205	}206 207	/* turn off interrupts before requesting the irq */208	writel(0, priv->regs + TVE200_INT_EN);209 210	ret = devm_request_irq(dev, irq, tve200_irq, 0, "tve200", priv);211	if (ret) {212		dev_err(dev, "failed to request irq %d\n", ret);213		goto clk_disable;214	}215 216	ret = tve200_modeset_init(drm);217	if (ret)218		goto clk_disable;219 220	ret = drm_dev_register(drm, 0);221	if (ret < 0)222		goto clk_disable;223 224	/*225	 * Passing in 16 here will make the RGB565 mode the default226	 * Passing in 32 will use XRGB8888 mode227	 */228	drm_fbdev_dma_setup(drm, 16);229 230	return 0;231 232clk_disable:233	clk_disable_unprepare(priv->pclk);234dev_unref:235	drm_dev_put(drm);236	return ret;237}238 239static void tve200_remove(struct platform_device *pdev)240{241	struct drm_device *drm = platform_get_drvdata(pdev);242	struct tve200_drm_dev_private *priv = drm->dev_private;243 244	drm_dev_unregister(drm);245	drm_atomic_helper_shutdown(drm);246	if (priv->panel)247		drm_panel_bridge_remove(priv->bridge);248	drm_mode_config_cleanup(drm);249	clk_disable_unprepare(priv->pclk);250	drm_dev_put(drm);251}252 253static void tve200_shutdown(struct platform_device *pdev)254{255	drm_atomic_helper_shutdown(platform_get_drvdata(pdev));256}257 258static const struct of_device_id tve200_of_match[] = {259	{260		.compatible = "faraday,tve200",261	},262	{},263};264 265static struct platform_driver tve200_driver = {266	.driver = {267		.name           = "tve200",268		.of_match_table = tve200_of_match,269	},270	.probe = tve200_probe,271	.remove_new = tve200_remove,272	.shutdown = tve200_shutdown,273};274drm_module_platform_driver(tve200_driver);275 276MODULE_DESCRIPTION(DRIVER_DESC);277MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");278MODULE_LICENSE("GPL");279